software crash
10 posts
• Page 1 of 1
software crash
hi,
when i drag drop MODERN WARFARE MODzPACK GPC the software crash.
ohow can i use this script ?
and anyone have a good settings for anti recoil and rapid fire that i can put on scripts ?
when i drag drop MODERN WARFARE MODzPACK GPC the software crash.
ohow can i use this script ?
and anyone have a good settings for anti recoil and rapid fire that i can put on scripts ?
-
BrainIL - Staff Sergeant
- Posts: 15
- Joined: Tue Jul 14, 2020 2:53 am
Re: software crash
BrainIL wrote:hi,
when i drag drop MODERN WARFARE MODzPACK GPC the software crash.
Welcome.
Does this also happen to you for other scripts?
Try temporarily disabling any security software and install the script again.
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: software crash
Mad wrote:BrainIL wrote:hi,
when i drag drop MODERN WARFARE MODzPACK GPC the software crash.
Welcome.
Does this also happen to you for other scripts?
Try temporarily disabling any security software and install the script again.
Thank you for the welcome.
I try other script. They work.
As i see every script with 3 files and more make the software crash.
I can download to the pc but when i try to rum or compile its crash.
And when i download it gave me only 3 files
-
BrainIL - Staff Sergeant
- Posts: 15
- Joined: Tue Jul 14, 2020 2:53 am
Re: software crash
Make sure your GTuner IV version and T2 Firmware version are the newest version.
Run Tools->Check for Updates while your have your T2 connected via prog port to your pc.
Make sure that you have unpacked gtuner IV in a path without any special characters and where you have full write access for your user account.
Try copy it to a different location just to check if it still crashes then.
Run Tools->Check for Updates while your have your T2 connected via prog port to your pc.
Make sure that you have unpacked gtuner IV in a path without any special characters and where you have full write access for your user account.
Try copy it to a different location just to check if it still crashes then.
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: software crash
Scachi wrote:Make sure your GTuner IV version and T2 Firmware version are the newest version.
Run Tools->Check for Updates while your have your T2 connected via prog port to your pc.
Make sure that you have unpacked gtuner IV in a path without any special characters and where you have full write access for your user account.
Try copy it to a different location just to check if it still crashes then.
up to date - yes
unintall and re install same folder - yes
uninstall and re install diffrent folder - yes
without any special characters - yes
full write access - yes
run as adminstor - yes
still not working
-
BrainIL - Staff Sergeant
- Posts: 15
- Joined: Tue Jul 14, 2020 2:53 am
Re: software crash
its in hebrew... its syays software stop responding
- Attachments
-
- ללא שם.png (242.9 KiB) Viewed 917 times
-
BrainIL - Staff Sergeant
- Posts: 15
- Joined: Tue Jul 14, 2020 2:53 am
Re: software crash
every GPC script crash the software
-
BrainIL - Staff Sergeant
- Posts: 15
- Joined: Tue Jul 14, 2020 2:53 am
Re: software crash
Set the Working directory as shown there: https://www.consoletuner.com/wiki/index ... _ide_usage
in section "Basic GPC IDE usage" , setup your “Working Directory” .
in section "Basic GPC IDE usage" , setup your “Working Directory” .
-
Scachi - Brigadier General
- Posts: 3044
- Joined: Wed May 11, 2016 6:25 am
- Location: Germany
Re: software crash
Scachi wrote:Set the Working directory as shown there: https://www.consoletuner.com/wiki/index ... _ide_usage
in section "Basic GPC IDE usage" , setup your “Working Directory” .
well, i just chnage it from C drive to D drive and its work fine now.
but i made what you say just for case.
thnks alot
-
BrainIL - Staff Sergeant
- Posts: 15
- Joined: Tue Jul 14, 2020 2:53 am
Re: software crash
Please ensure the directory path where you have the scripts files, as well as the file names, does not have any special character (only regular ASCII characters). The compiler pre-processor currently does not support multi-byte characters.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 117 guests