Using two T2 in PS3

[NashRG]

Hi

I'm having problems to make 2 T2 work together (different controllers and ports) on a PS3.

When I plug only the controllers it works fine.
When I plug one controller > T2 in one USB port of the PS3 it works fine.
When I plug the second controller > T2 in the other USB port of the PS3, both controllers stop working.

Tried with two DS3's and two DS4's, same results.

Tried to change the GTuner settings below for both T2:
Output Polling Rate > Protocol's Default
Output Protocol > USB Playstation 3

I think when I'm plugging both controller > T2, the PS3 is forcing both to be the controller "1", which makes then stop working. It's just a guess.

I can use the 2 T2 with the DS4's on a PS4 without a problem.

Any suggestions?

[NashRG]

Ok, some more info:

The leds of both T2's flash very fast in green and yellow (on PS4 they are solid green).
The leds in the back of both DS3's connected to the T2's blink red fast.