ConsoleTuner

Can anyone help me with this ive tried 2 other power supplys both 7.5 v even tho they shouldnt be needed for this ive tried several micro usb cables no luck its just constantly disconecting.

https://youtu.be/Sub4t2QwjjI

Try it without power supply! Don't need power supply with that set up...also take batteries out of controller!

bonefisher wrote:Try it without power supply! Don't need power supply with that set up...also take batteries out of controller!

Already tried both ways and no batteries in controller still no luck, its making it useless for my xbox one x.

Today I had change to check your video more carefully (thank you for making it). It seems the issue starts with the controller resetting. To confirm that, please try the following:

1) Connect the Titan Two to the Xbox One console;
2) Wait the display show AU;
3) Connect the XB1 controller to any Input port;
4) Wait the display show 0;
5) Unplug the XB1 controller;
6) Connect some other controller to the Titan Two (PS4, PS3, XB360, etc - but not an XB1 controller).
7) Check if you can operate the console and if the reset stops.

Thanks.

J2Kbr wrote:Today I had change to check your video more carefully (thank you for making it). It seems the issue starts with the controller resetting. To confirm that, please try the following:

1) Connect the Titan Two to the Xbox One console;
2) Wait the display show AU;
3) Connect the XB1 controller to any Input port;
4) Wait the display show 0;
5) Unplug the XB1 controller;
6) Connect some other controller to the Titan Two (PS4, PS3, XB360, etc - but not an XB1 controller).
7) Check if you can operate the console and if the reset stops.

Thanks.

I Don't have another controller i wanted the titan 2 for running scripts nothing else, i can add though that it doesn't start disconnecting and flashing red until i connect the xb1 controller.

It would be very good if you could find another controller to test. If the other controller also resets will then be a strong signal something is wrong with the Titan Two, otherwise it can indicate the problem may be with your Xbox controller.

J2Kbr wrote:It would be very good if you could find another controller to test. If the other controller also resets will then be a strong signal something is wrong with the Titan Two, otherwise it can indicate the problem may be with your Xbox controller.

So i borrowed a ps4 controller of a friend and it works fine no disconnection, so i tested 4 more Xbox 1 controllers all the same issue why is this.

Look in device configurations and see if (ALLOW FFB)port A and port B are checked. If so uncheck them and test!

bonefisher wrote:Look in device configurations and see if (ALLOW FFB)port A and port B are checked. If so uncheck them and test!

Still the same just flashes red and keeps disconnecting.

V3NOMZ wrote:So i borrowed a ps4 controller of a friend and it works fine no disconnection, so i tested 4 more Xbox 1 controllers all the same issue why is this.

Thanks you V3NOMZ. I could not reproduce this issue. However, this week we will be releasing a firmware update with improvements on the XB1 drivers and hopefully the changes will also make some progress on what your are reporting.