ConsoleTuner • View topic - Unable to get Raiju ultimate to show input in device monitor

Re: Unable to get Raiju ultimate to show input in device mon

Posted: Fri Apr 05, 2019 3:07 am

by antithesis

I heard from him again overnight. He's hard at work, I'm sure he'll get to forum support when he's knocked over a major milestone for us. Actually, it's two of them... :shocked:

Re: Unable to get Raiju ultimate to show input in device mon

Posted: Fri Apr 12, 2019 2:38 am

by slatermerc

Updated to the latest gtuner and firmware, still no luck with the Razer Raiju Ultimate

Re: Unable to get Raiju ultimate to show input in device mon

Posted: Sun Apr 14, 2019 7:35 am

by slatermerc

Bump

Re: Unable to get Raiju ultimate to show input in device mon

Posted: Mon Apr 15, 2019 10:01 pm

by J2Kbr

By connecting the controller on the Titan Two and the Titan Two on the PS4 console, does both connections shows "Full Passthru" on Gtuner's Device Monitor? Thanks.

Re: Unable to get Raiju ultimate to show input in device mon

Posted: Mon Apr 15, 2019 11:11 pm

by slatermerc

Yes it shows Full Passthru and then the Razer Raiju Ultimate works. So if I wanted to use the Raiju on an Xbox One, I need to connect it via a PS4 & DS4 first then switch it to a Xbox controller and Xbox One? Also I cannot seem to get the bluetooth to detect my Raiju, it works for other controllers.

Re: Unable to get Raiju ultimate to show input in device mon

Posted: Tue Apr 16, 2019 9:03 am

by J2Kbr

slatermerc wrote:Yes it shows Full Passthru and then the Razer Raiju Ultimate works. So if I wanted to use the Raiju on an Xbox One, I need to connect it via a PS4 & DS4 first then switch it to a Xbox controller and Xbox One? Also I cannot seem to get the bluetooth to detect my Raiju, it works for other controllers.

Thank you for confirming in full passthru mode the controller works. This means this controller requires some extra initialization apart from the regular procedures to initiate a regular PS4 controller. Instead of purchase this controller for debug, I think it will be better have the Titan Two capture the traffic between the controller and the console when in full passthru mode and report the results to Gtuner IV, similarly as we have for capture the device's USB descriptors.

Re: Unable to get Raiju ultimate to show input in device mon

Posted: Tue Apr 16, 2019 10:56 am

by slatermerc

J2Kbr wrote:
slatermerc wrote:Yes it shows Full Passthru and then the Razer Raiju Ultimate works. So if I wanted to use the Raiju on an Xbox One, I need to connect it via a PS4 & DS4 first then switch it to a Xbox controller and Xbox One? Also I cannot seem to get the bluetooth to detect my Raiju, it works for other controllers.

Thank you for confirming in full passthru mode the controller works. This means this controller requires some extra initialization apart from the regular procedures to initiate a regular PS4 controller. Instead of purchase this controller for debug, I think it will be better have the Titan Two capture the traffic between the controller and the console when in full passthru mode and report the results to Gtuner IV, similarly as we have for capture the device's USB descriptors.

[USB DESCRIPTOR]
12 01 00 02 00 00 00 40 32 15 04 10 01 01 01 02 03 01 09 02 E1 00 04 01 00 A0 FA 09 04 00 00 00 01 01 00 00 0A 24 01 00 01 47 00 02 01 02 0C 24 02 01 01 01 06 02 03 00 00 00 0A 24 06 02 01 01 03 00 00 00 09 24 03 03 02 04 04 02 00 0C 24 02 04 02 04 03 01 00 00 00 00 09 24 06 05 04 01 03 00 00 09 24 03 06 01 01 01 05 00 09 04 01 00 00 01 02 00 00 09 04 01 01 01 01 02 00 00 07 24 01 06 01 01 00 0B 24 02 01 01 02 10 01 80 BB 00 09 05 83 05 62 00 01 00 00 07 25 01 00 00 00 00 09 04 02 00 00 01 02 00 00 09 04 02 01 01 01 02 00 00 07 24 01 01 01 01 00 0B 24 02 01 02 02 10 01 80 BB 00 09 05 02 09 C4 00 01 00 00 07 25 01 00 00 00 00 09 04 03 00 02 03 00 00 00 09 21 00 01 00 01 22 AB 00 07 05 84 03 40 00 05 07 05 04 03 40 00 05

[STRING 1 DESCRIPTOR]
00 00 00 03 00 00 02 01 80 06 03 01 04 09 00 0C
0C 03 52 00 61 00 7A 00 65 00 72 00

[STRING 2 DESCRIPTOR]
00 00 00 03 00 00 02 01 80 06 03 02 04 09 00 36
36 03 52 00 61 00 7A 00 65 00 72 00 20 00 52 00 61 00 69 00 6A 00 75 00 20 00 55 00 6C 00 74 00 69 00 6D 00 61 00 74 00 65 00 20 00 57 00 69 00 72 00 65 00 64 00

[STRING 3 DESCRIPTOR]
00 00 00 03 00 00 02 01 80 06 03 03 04 09 00 2E
2E 03 50 00 4D 00 31 00 38 00 33 00 38 00 43 00 30 00 33 00 37 00 30 00 32 00 39 00 33 00 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

[INTERFACE 3 HID DESCRIPTOR]
00 00 00 03 00 00 02 01 81 06 22 00 00 03 00 AB
05 01 09 05 A1 01 85 01 09 30 09 31 09 32 09 35 15 00 26 FF 00 75 08 95 04 81 02 09 39 15 00 25 07 35 00 46 3B 01 65 14 75 04 95 01 81 42 65 00 05 09 19 01 29 0E 15 00 25 01 75 01 95 0E 81 02 06 00 FF 09 20 75 06 95 01 81 02 05 01 09 33 09 34 15 00 26 FF 00 75 08 95 02 81 02 06 00 FF 09 21 95 36 81 02 85 05 09 22 95 1F 91 02 85 03 0A 21 27 95 2F B1 02 06 80 FF 85 E0 09 57 95 02 B1 02 C0 06 F0 FF 09 40 A1 01 85 F0 09 47 95 3F B1 02 85 F1 09 48 95 3F B1 02 85 F2 09 49 95 0F B1 02 85 F3 0A 01 47 95 07 B1 02 C0

This is the descriptors when running full passthru, is this what you need?

Re: Unable to get Raiju ultimate to show input in device mon

Posted: Thu Apr 18, 2019 1:18 pm

by J2Kbr

Thank you slatermerc for posting the USB descriptors, but I need the actual USB data traffic between the controller and the console. This functionality was just implemented and released this morning. Please update your Gtuner IV and Titan Two firmware. After that proceed as the following:

1) Unplug all controllers from the Titan Two;
2) Connect the output to the PS4 console;
3) Connect the Prog port to your computer;
4) Open Gtuner IV and go to top menu Tools -> "Fetch Descriptors ...";
5) Plug the Raiju Ultimate (in PS4 compatibility mode) to any port at the front of the Titan Two;
6) Wait couple seconds for this window be update with the captured data;
7) Click on the button "Copy Descriptors" and post here.

Thank you.

Re: Unable to get Raiju ultimate to show input in device mon

Posted: Thu Apr 18, 2019 11:14 pm

by slatermerc

J2Kbr wrote:Thank you slatermerc for posting the USB descriptors, but I need the actual USB data traffic between the controller and the console. This functionality was just implemented and released this morning. Please update your Gtuner IV and Titan Two firmware. After that proceed as the following:

1) Unplug all controllers from the Titan Two;
2) Connect the output to the PS4 console;
3) Connect the Prog port to your computer;
4) Open Gtuner IV and go to top menu Tools -> "Fetch Descriptors ...";
5) Plug the Raiju Ultimate (in PS4 compatibility mode) to any port at the front of the Titan Two;
6) Wait couple seconds for this window be update with the captured data;
7) Click on the button "Copy Descriptors" and post here.

Thank you.

Here's the USB data traffic

Code: Select all

Re: Unable to get Raiju ultimate to show input in device mon

Posted: Mon Apr 22, 2019 6:14 am

by J2Kbr

Thank you slatermerc for sending the captured data. Support for Nacon Revolution Unlimited Pro Controller was added on firmware version 1.02. :smile0517: