ConsoleTuner

In the past I have used the T2 with my Xbox1 and never had any issues. Recently I’ve been trying to use it with my PS4 but I can not get it to work. I’ve connected to GTUNER and switched output to PS4 as well as updated to latest firmware. Basically everything seems to work fine until I plug in the DS4 controller.

The T2 will run my scripts with no controller, but as soon as the DS4 gets plugged in everything stops working. While the DS4 is connected the lights on the T2 remain green and when connected to GTUNER at the same time it says my script is running, only nothing is happening on screen.

I would be ok with it working without a controller connected (while flashing AU) but it stops after a short period of time.

I’m sure that I’m overlooking something obvious here. Any help is appreciated.

It sound like you need this setting on the PS4 itself:

On PlayStation 4, enable wired communication:
Settings → Devices → Controllers → Communication Method: Use USB Cable.

https://www.consoletuner.com/wiki/index ... figuration

That must be it. I’ll be trying this when i get home from work today. Thank you!