XBOX ONE + Logitech X56 + TITAN TWO

[UndercoverHipp0]

so 2 steps back tonight. i got everything set in the input translator how i want it after playing a little and seeing what changes would benefit me. Made all of said changes. Now running the input translator and monitoring inputs i am getting ghost inputs. very sporadic and not specific to one particular input. Then the titan 2 will reset it self to the 0 memory bank. i will put it back to my translator and it will work okay for a bit then just reset out of nowhere. any thoughts on what could be causing this? i have tried making an identical translator in a different file. remapping and reconfig the sd card. storing translator on local memory and sd card. nothing helps.......

No error codes on the unit either. Just resets to the 0 memory.

[UndercoverHipp0]

const uint8 cmap[] = { 0x3C, 0x07, 0x26, 0x26, 0x03, 0x04, 0x00, 0x08, 0x26, 0x05, 0x09, 0x0A, 0x0B, 0x0C, 0x06, 0x01, 0x0F, 0x26, 0x0E, 0x0D, 0x10, 0x02, 0x15, 0x16, 0x24, 0x1B, 0x19, 0x1A, 0x17, 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x18, 0x26 };

heres the maps if that will help in any way

GIVRMP:3C072626030400082605090A0B0C06010F260E0D10021516241B191A1726262626262626261826

[UndercoverHipp0]

https://youtu.be/y6E37OSIYiw

heres a video screen cap of it breaking the translator. this was actually the worst it had been. it usually lasted about 5 minutes or so but it was crashing and ghost inputting quite a bit for the capture. you can see me move the throttle and pitch/roll the stick once but no other inputs are from me

[UndercoverHipp0]

Quick update. I turned off buttons 18-21 in the input translator and the frequency of crashes has dropped to at most once every 45 minutes or so. Very happy with my mappings. If the duplicate buttons could be sorted I’d be in heaven. Any thoughts?

[J2Kbr]

Very happy you are making progress.

In the video I noticed you are applying the Input Translator on all USB ports, does this is necessarily? Normally what I do is apply the Input translator to only a specific port (i.e. USB-A) and use the default mapping on the other controller (i.e. USB-C).

[UndercoverHipp0]

Very happy you are making progress.

In the video I noticed you are applying the Input Translator on all USB ports, does this is necessarily? Normally what I do is apply the Input translator to only a specific port (i.e. USB-A) and use the default mapping on the other controller (i.e. USB-C).

I will change that and see if it changes anything. I need the translator on 2 different inputs (stick/throttle) but certainly no need on the authentication controller or console.

[UndercoverHipp0]

I did have them all on for the video but on the one I ended up saving I did have the “B” input turned off so the controller worked as expected. C and D were both on as once I’m done programming I needed it to be active on the C input. I returned it and only left A and C active and haven’t had any problems yet! I’m working on a write up now for other Xbox users for in game mapping with my input translator and will be posting it around soon! Thanks for all the help here.