Page 1 of 1

Titan Two not recognising Keyboard

PostPosted: Thu Aug 15, 2019 12:29 pm
by TitanArk
Hi all,

Been looking all over the web for any info in regards to this and cant for the life of me find anything.

My keyboard: Steel Series Merc Stealth (has 2 usb hub inbuilt (would this cause issues?)

[USB DESCRIPTOR]
12 01 00 02 09 00 01 40 09 04 5A 00 00 01 00 00 00 01 09 02 19 00 01 01 00 E0 32 09 04 00 00 01 09 00 00 00 07 05 81 03 01 00 0C


Problem:

Nb:
- I've updated the Titan Two to the latest version
- set the output protocol to USB Multi Interface HID also tried Xbox 360 just in case it was that


Every time I connect the keyboard to the Titan I get a red light (no error message though) does this mean I need to purchase a power adaptor for it? Mouse works perfectly but keyboard isnt even being picked up.

any help would be great!

Thanks

Re: Titan Two not recognising Keyboard

PostPosted: Thu Aug 15, 2019 8:29 pm
by Mad
Does the keyboard require a driver?

If your PC is close by you can use KMG capture - leave the keyboard/mouse plugged into the pc. This also works as a power source.

Press F4 in Gtuner or Tools>KMG Capture

Re: Titan Two not recognising Keyboard

PostPosted: Thu Aug 15, 2019 10:32 pm
by TitanArk
Yeah the keyboard does require a driver

Thanks for that - didnt realise you had to 'copy the driver over' so to speak

I've tried the capture as suggested - didn't seem to do anything (unless I'm doing it wrong)

What I did:

- Connected keyboard to the PC
- Ran the capture (F4) with the Titan Two installed
- exited the capture and then connected the keyboard to the device like before
- This still gives me a red light on the input (tried all inputs just for safe measure)

I appreciate your advice and help

Re: Titan Two not recognising Keyboard

PostPosted: Thu Aug 15, 2019 11:55 pm
by Mad
It wont work plugged into the T2 if it requires a driver.

Sorry, I'll try explain a bit better.

You leave T2 plugged into the console via output

You leave the controller plugged into input A

You plug the T2 into the pc via prog and leave it in.

Now with it all connected and your mouse and keyboard plugged into your PC, Enter KMG Capture.

Make sure keyboard / mouse is ticked and leave the window open. (Don't unplug anything)

You should now be able to use the mouse and keyboard on the console as it will capture your mouse and keyboard input sent from your PC :smile0517:

Re: Titan Two not recognising Keyboard

PostPosted: Fri Aug 16, 2019 1:17 am
by TitanArk
Ahh right that makes sense!

Thanks for the clarification. Just going to add another issue to the mix:

I'm trying to us the Titan Two with my keyboard and mouse on the PC to play PC games (if it's even possible)- with this method it doesn't work (as ALT+TAB kills the capture)

Do you know of another way around this?

Thanks again!

Re: Titan Two not recognising Keyboard

PostPosted: Fri Aug 16, 2019 8:30 pm
by Mad
You can change the key combo here: Gtuner>Tools>Preferences>KMG Capture

However you need to keep the Gtuner window on top otherwise the inputs will be sent to both PC as normal and T2.

I'm not sure how you would get around this to play on PC with KMG capture.