can't connect DS4 wirelessly to ps4

[squarezebra]

Hi,

I read the user manual, and watched a video on YouTube but I can't figure this out.

I have the bluetooth module installed, and configured. Gtuner is up to date. Output set to bluetooth ps4. I wired the T2 to my pc, and could sync the ds4 to the T2 wirelessly no problem. Could even see movement in the device manager. But, nothing then happens on the ps4 side. I have the T2 plugged into my ps4 usb, but it won't respond to my controller. I tried unplugging the connection to the pc, and then my controller turns off. I even tried plugging my controller into there titan 2 via usb cable, and nope .... nothing.

I've tried all 3 connection methods in the user manual here:
https://www.consoletuner.com/wiki/index ... aystation4
and none work.

So it seems, I can either sync wirelessly to T2 when connected to my pc but then I can't control my ps4, or I can sync my ds4 to my ps4 normally but then I'm not connected to the T2.

Am I missing something?

[Scachi]

The "Bluetooth PS4" protocol should only be used when you want to connect the T2 itself wireless to your console.
For using the controller wireless to the T2 and the T2 via USB in your ps4 you should use "USB Automatic" protocol.
And you should have enabled the USB Communication method on your ps4 console:
On PlayStation 4, enable wired communication:
Settings → Devices → Controllers → Communication Method: Use USB Cable.

[squarezebra]

Right, that's what I was missing.
And my problem is solved.
Thanks for that Scachi.