Question about using the T2 with a xim apex

[bt1740]

So I know the typical way to connect a XIM device to the T2 is to connect it on one of the USB ports, and connect everything to the XIM device. And I know it's possible to connect the T2 to the apex with changing the output protocol. I'm wondering that if I connect my mouse to the T2 directly (and i'll be able to use the mxyconverter function which is what I want to do for anti recoil) and then if I connect the T2 to the apex with my kb and DS4 to apex, will I then be able to use the xim apex's ballistic curves and ST for my mouse even though its coming through the T2?
Thanks

[J2Kbr]

Yes, what you are describing is 100% possible and will work.

[bt1740]

Yes, what you are describing is 100% possible and will work.

I changed the output protocol, and plugged in the xim directly to the PS4 with the DS4 connected to the apex. DS4 input works fine. I connected the t2 to the apex hub also, but don't seem to get any input. I am using KMG capture though, I do not have anything connected to the t2 directly. Any ideas?

[J2Kbr]

Please visit this topic:

viewtopic.php?f=23&t=9889

There you will find information and the script needed for this setup.