ConsoleTuner

i tried antihesis and it makes my recoil go down diagnally to the right of the screen, what am i doing wrong?

I tried AryanX and left deadzone at 0% increased y recoil weight to 30%, it diden't do anything.
I then increase deadzone to 5, and straight away it works and my aim goes right diagnally down the screen.

decreasing the x value helps keep it a bit more straighter, but the recoil goes down in small stages one at a time while holding down left mouse click.

Now i tried fpsmodez by bonefisher, the antirecoil works as intended, but because it doesn't support a antirecoil deadzone compensation is why I can't really move my aim around while firing. if i did it would be all zig zag shaped.

I have tried j2k bfv gamepack, and when i go to change the horizontal recoil, it doesn't work, whatever value i put in it drags my aim left or right diagnally fast down the screen.

Use AryanX anti recoil is best for XIM.

bonefisher wrote:Use AryanX anti recoil is best for XIM.

is that in the universal game pack?

if so what i put for reduce hip %?

Cokey wrote:is that in the universal game pack?

if so what i put for reduce hip %?

That's up to you. The percentage will be deducted from your current anti recoil value when firing from the hip.

The DrNefario anti recoil is vertical only.

Mad wrote:

Cokey wrote:is that in the universal game pack?

if so what i put for reduce hip %?

That's up to you. The percentage will be deducted from your current anti recoil value when firing from the hip.

The DrNefario anti recoil is vertical only.

where can i find this antirecoil scrpt thats best for xim

The first five in the universal gamepack work with xim.

Mad wrote:The first five in the universal gamepack work with xim.

i tried antihesis and it makes my recoil go down diagnally to the right of the screen, what am i doing wrong?

I tried AryanX and left deadzone at 0% increased y recoil weight to 30%, it diden't do anything.
I then increase deadzone to 5, and straight away it works and my aim goes right diagnally down the screen not what i wanted though.

decreasing the x value helps keep it a bit more straighter, but the recoil goes down in small stages one at a time while holding down left mouse click.

Now i tried fpsmodez by bonefisher, the antirecoil works as intended, but because it doesn't support a antirecoil deadzone compensation is why I can't really move my aim around while firing. if i did it would be all zig zag shaped.

I have tried j2k bfv gamepack, and when i go to change the horizontal recoil, it doesn't work, whatever value i put in it drags my aim left or right diagnally fast down the screen.

If recoil is going downwards to the right, it means two things -

1. Either horizontal recoil is set above 0, or you need to set it to go left instead of right to counter that specific weapon recoil pattern.
2. Vertical recoil is too high, start at 25 and work up or down, depending on reticle movement.

Recoil control is documented in most scripts. Edit the red values in a GPC script, or the relevant recoil values in an Interactive Configurator, depending on the weapon you're using.

antithesis wrote:If recoil is going downwards to the right, it means two things -

1. Either horizontal recoil is set above 0, or you need to set it to go left instead of right to counter that specific weapon recoil pattern.
2. Vertical recoil is too high, start at 25 and work up or down, depending on reticle movement.

Recoil control is documented in most scripts. Edit the red values in a GPC script, or the relevant recoil values in an Interactive Configurator, depending on the weapon you're using.

Yea, i managed to get the horizontal recoil to be under better control, but when i aim + fire the recoil goes down in small stages which i dont understand why, its like it will go down at good pace, then suddenly stop quickly and move slower, and repeat that process.

I have installed fpsmod pack by bonefisher and i have achieved almost perfect horizontal control.

Only issue with this script like i mentioned it has no deadzone compensation so when firing and aiming it goes all zig zaggy.

With J2k bfv gamepack, vertical recoil works fine and I can aim and fire while moving my aim around with no zigg zagy movements thanks to the deadzone compensation built in his script. but horizontal will not work for me, no matter what value i give it, it will not decrease my horizontal aim at all, only make it worse. ive tried -, +, really low values.

I have tried xim special anti recoil gamepack, i am impressed, but there is no horizontal aim adjustment option in that gamepack.

using universal game pack for antirecoil first time i fire it goes down, second time i fire it doesn't go down.

if ihold my fire button down it slowly starts to go down after 10 seconds.

i i change my deadzone compensation to 13.0 it make my aim go diagnally right, if i work down the values so it doesn't do this, im at 1.0, but then recoil wont work, and my aim is drifting down the screen by it self.

this is clearly buged and needs fixing.