Is Switch Taiko Controller Supported?
5 posts
• Page 1 of 1
Is Switch Taiko Controller Supported?
Hello, I was wondering if the Titan Two supported the Hori Taiko Drum Controller for Nintendo Switch.
I’m not sure if I am doing something wrong or if the device is not supported.
Under the Device monitor tab, it is being listed as a PlayStation 4 controller and none of the buttons are being registered.
The Hid descriptors:
[USB DESCRIPTOR]
12 01 00 02 00 00 00 40 0D 0F F0 00 00 01 01 02 00 01 09 02 29 00 01 01 00 80 FA 09 04 00 00 02 03 00 00 00 09 21 11 01 00 01 22 50 00 07 05 02 03 40 00 05 07 05 81 03 40 00 05
[STRING 1 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 01 04 09 00 1C
1C 03 48 00 4F 00 52 00 49 00 20 00 43 00 4F 00 2E 00 2C 00 4C 00 54 00 44 00 2E 00
[STRING 2 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 02 04 09 00 22
22 03 54 00 61 00 69 00 6B 00 6F 00 20 00 43 00 6F 00 6E 00 74 00 72 00 6F 00 6C 00 6C 00 65 00 72 00
[INTERFACE 0 HID DESCRIPTOR]
00 00 00 02 00 00 02 01 81 06 22 00 00 00 00 50
05 01 09 05 A1 01 15 00 25 01 35 00 45 01 75 01 95 0E 05 09 19 01 29 0E 81 02 95 02 81 01 05 01 25 07 46 3B 01 75 04 95 01 65 14 09 39 81 42 65 00 95 01 81 01 26 FF 00 46 FF 00 09 30 09 31 09 32 09 35 75 08 95 04 81 02 75 08 95 01 81 01 C0
Thank You.
I’m not sure if I am doing something wrong or if the device is not supported.
Under the Device monitor tab, it is being listed as a PlayStation 4 controller and none of the buttons are being registered.
The Hid descriptors:
[USB DESCRIPTOR]
12 01 00 02 00 00 00 40 0D 0F F0 00 00 01 01 02 00 01 09 02 29 00 01 01 00 80 FA 09 04 00 00 02 03 00 00 00 09 21 11 01 00 01 22 50 00 07 05 02 03 40 00 05 07 05 81 03 40 00 05
[STRING 1 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 01 04 09 00 1C
1C 03 48 00 4F 00 52 00 49 00 20 00 43 00 4F 00 2E 00 2C 00 4C 00 54 00 44 00 2E 00
[STRING 2 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 02 04 09 00 22
22 03 54 00 61 00 69 00 6B 00 6F 00 20 00 43 00 6F 00 6E 00 74 00 72 00 6F 00 6C 00 6C 00 65 00 72 00
[INTERFACE 0 HID DESCRIPTOR]
00 00 00 02 00 00 02 01 81 06 22 00 00 00 00 50
05 01 09 05 A1 01 15 00 25 01 35 00 45 01 75 01 95 0E 05 09 19 01 29 0E 81 02 95 02 81 01 05 01 25 07 46 3B 01 75 04 95 01 65 14 09 39 81 42 65 00 95 01 81 01 26 FF 00 46 FF 00 09 30 09 31 09 32 09 35 75 08 95 04 81 02 75 08 95 01 81 01 C0
Thank You.
-
Twinlyn - Private First Class
- Posts: 2
- Joined: Tue Jan 12, 2021 8:43 pm
Re: Is Switch Taiko Controller Supported?
I just added this controller VID:PID to load the Switch driver (and not the PS4 driver). However, I did not increment the FW version. Therefore, you will need manually put the Titan Two in programming mode. For that, before connect the Titan Two to the computer via the PROG port, press and hold both buttons and only then connect it to your computer. The device should enter in programming mode, showing P on the display, allowing redo the firmware update using Gtuner IV (Tools -> Check for Updates). Thank you.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Is Switch Taiko Controller Supported?
Hello,
The controller is now listed as a Nintendo Switch controller under device monitor however, none of the button presses are being registered.
The controller works fine being plugged directly into the computer without the Titan Two, but I’m trying to get it to work on Ps4/VitaTV.
Thank You.
The controller is now listed as a Nintendo Switch controller under device monitor however, none of the button presses are being registered.
The controller works fine being plugged directly into the computer without the Titan Two, but I’m trying to get it to work on Ps4/VitaTV.
Thank You.
-
Twinlyn - Private First Class
- Posts: 2
- Joined: Tue Jan 12, 2021 8:43 pm
Re: Is Switch Taiko Controller Supported?
Thank you for checking the change. Please manually updated the firmware again, this time it is configured to utilize the HID driver, which should work for this controller.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Is Switch Taiko Controller Supported?
Can someone help me im trying to use the titan 2 on a Nintendo switch but nothing is being picked up. Even from the device monitor nothing Is being input. I changed output protocol to every Nintendo switch option but I had no success. Also the Nintendo switch controllers are being read as ps4 controllers.
-
Sloppyname41 - Sergeant First Class
- Posts: 21
- Joined: Fri Feb 28, 2020 8:28 pm
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 60 guests