Titan 2 Issue
6 posts
• Page 1 of 1
Titan 2 Issue
Hi Guys
Hope you can help.
I havnt used my Titan 2 in a couple of months and have just tried to get it going again and having issues.
I first plugged it straight into the ps as normal as there were packs previously loaded onto it but the number just started spinning around.
I then took it out and plugged the usb into prog and into the back of the laptop with gtuner open.
I have loaded up that latest updates within Gtuner but I just cannot get it to see the device.
I have a constant red P and on the screen the number is kinda spinning around.
I have held down both buttons and when I get the P also on screen it makes no difference.
Any ides what I can do here?
Thanks
Hope you can help.
I havnt used my Titan 2 in a couple of months and have just tried to get it going again and having issues.
I first plugged it straight into the ps as normal as there were packs previously loaded onto it but the number just started spinning around.
I then took it out and plugged the usb into prog and into the back of the laptop with gtuner open.
I have loaded up that latest updates within Gtuner but I just cannot get it to see the device.
I have a constant red P and on the screen the number is kinda spinning around.
I have held down both buttons and when I get the P also on screen it makes no difference.
Any ides what I can do here?
Thanks
-
Dask - Corporal
- Posts: 5
- Joined: Mon Oct 18, 2021 1:43 pm
Re: Titan 2 Issue
and I have tried like 4 different cables
-
Dask - Corporal
- Posts: 5
- Joined: Mon Oct 18, 2021 1:43 pm
Re: Titan 2 Issue
Dask wrote:I have held down both buttons and when I get the P also on screen it makes no difference.
Did you check for updates after doing this? This will factory reset the device.
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: Titan 2 Issue
yeah I have done the "check for update" loads of times but makes no difference.
It does say within the update screen though - device not connected, skipping firmware update check.
Not sure how it can reset the device when it cant see the device.
I also tried to reinstall gtuner to see if that makes any difference but nothing changes
It does say within the update screen though - device not connected, skipping firmware update check.
Not sure how it can reset the device when it cant see the device.
I also tried to reinstall gtuner to see if that makes any difference but nothing changes
-
Dask - Corporal
- Posts: 5
- Joined: Mon Oct 18, 2021 1:43 pm
Re: Titan 2 Issue
No error codes in Gtuners output panel?
Only other suggestion is cables and trying different USB ports on the PC.
I understand you tried 4 but the T2 requires high quality data cables and can be picky. If you've got the short USB cable it came with try that for PROG.
Otherwise contact the retailer you purchased from.
Only other suggestion is cables and trying different USB ports on the PC.
I understand you tried 4 but the T2 requires high quality data cables and can be picky. If you've got the short USB cable it came with try that for PROG.
Otherwise contact the retailer you purchased from.
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: Titan 2 Issue
This is what is in the output of the new one I installed.
System: Windows 7 Version 6.1 (Build 7601: SP 1) (winnt 6.1.7601, x86_64, x86_64-little_endian-llp64, LibGLES)
OpenGL: C:/Users/James/Desktop/gtunernew/GtunerIV/lib/libGLESv2.dll
Locale: English, United Kingdom
Gtuner: IV 1.11.3.1 EN:Set
Resources Dir: C:/Users/James/Desktop/gtunernew/GtunerIV
Data Dir: C:/Users/James/Desktop/gtunernew/GtunerIV
Working Dir: C:/Users/James/Desktop/gtunernew
yeah have also tried multiple usb ports also.
Guess its dead.
System: Windows 7 Version 6.1 (Build 7601: SP 1) (winnt 6.1.7601, x86_64, x86_64-little_endian-llp64, LibGLES)
OpenGL: C:/Users/James/Desktop/gtunernew/GtunerIV/lib/libGLESv2.dll
Locale: English, United Kingdom
Gtuner: IV 1.11.3.1 EN:Set
Resources Dir: C:/Users/James/Desktop/gtunernew/GtunerIV
Data Dir: C:/Users/James/Desktop/gtunernew/GtunerIV
Working Dir: C:/Users/James/Desktop/gtunernew
yeah have also tried multiple usb ports also.
Guess its dead.
-
Dask - Corporal
- Posts: 5
- Joined: Mon Oct 18, 2021 1:43 pm
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 132 guests