Xbox Elite controller wont authenticate

[MrWuf]

I haven't had much time to do much testing recently but I can confirm that the controller is not losing its connection if I leave the T2 plugged into a media PC using the PROG port. I am guessing this is also acting as a power supply.

The only other oddity I am experiencing at the moment is with one of the paddles. The upper right paddle acts as if it is mapped to 2 buttons. I saw bonefisher made a couple Elite related files available for download. I hope to take a closer look at those soon to see if either happen to be a potential fix.

Thanks

[J2Kbr]

The only other oddity I am experiencing at the moment is with one of the paddles. The upper right paddle acts as if it is mapped to 2 buttons. I saw bonefisher made a couple Elite related files available for download. I hope to take a closer look at those soon to see if either happen to be a potential fix. Thanks

Please check in the Xbox Accessories App if you have the paddles mapped to controller buttons, mostly like this is the case. In the app you can unmap all paddles to fix this.

[Starhowl]

I use elite controller all the time with no issues what so ever so I would make sure your settings in console is using USB cable instead of connection wireless. If that is not the case change cables because I have no problems!

That's the one info I needed! ;)

[scatrinomee]

Google "Tools for working with DualShock 4"

Does anyone have an idea of what needs to be run in what order? The read me simply displays what you can do with it and not what to do. I've gotten jedi_tool.py to the point where it doesnt present errors via pip install and installation of "libusb-win32-devel-filter-1.2.6.0.exe" but I plug my controller in via usb and run it to receive zero information. There is also no file generated within that folder with info either.

[lotec25]

Can someone link me, or give some basic info on how to put this .zip on the Titan 2? I've looked around and not had any luck, really not sure what I should be doing here.

Thanks

[ivansm]

Hello lotec25,

Has anyone succeeded using Titan two with Firm where dump ?
My tt2 refuse to authentificate even with original DS4 controller :(

[Scachi]

Hello lotec25,

Has anyone succeeded using Titan two with Firm where dump ?
My tt2 refuse to authentificate even with original DS4 controller :(

You should check if your firmware and gtuner iv is updated.
Then check the cable to your ds4 controller connected to input-A, try input-B also and try some other cables. Authentification with a ds4 on a ps4 should work fine.

[ivansm]

Scachi,

Everything is updated, tested on PS4 slim.
Original dual shock 4 gets constant authentication failures.
Other non ps4 original controllers tend to work for 3-4 minutes before disconnecting.

[J2Kbr]

Scachi, Everything is updated, tested on PS4 slim. Original dual shock 4 gets constant authentication failures. Other non ps4 original controllers tend to work for 3-4 minutes before disconnecting.

Please check on the PS4 settings if the option to use wired communication is checked:

Settings → Devices → Controllers → Communication Method: Use USB Cable.

Based in your feedback mostly like this option is disabled.

[ivansm]

ok