Page 2 of 4

Re: More buttons ? -> Custom DS4 snap-on device

PostPosted: Thu Aug 24, 2017 12:12 pm
by Scachi
J2Kbr wrote:Very impressive. :joia: :joia:

A Bluetooth connection with the Titan Two to fetch relevante info to display on the OLED display seems the best option. To power the eletronics of your adapter, not sure what would be the best option. But it would be nice avoid the needed of two usb cables, maybe an usb adapter just to get power from the cable connected on the controller.


I already ordered a bluetooth module for the teensy board, can't wait to test it as soon it arrives.
Great idea to power both with one cable... going to try that one first ;-)

Re: More buttons ? -> Custom DS4 snap-on device

PostPosted: Tue Nov 07, 2017 10:50 pm
by Scachi
Updated, attached the teensy sourcecode to my initial post.

Re: More buttons ? -> Custom DS4 snap-on device

PostPosted: Wed Nov 08, 2017 12:16 am
by creedkiller
you have done some amazing work Scachi

Re: More buttons ? -> Custom DS4 snap-on device

PostPosted: Wed Nov 08, 2017 9:39 am
by J2Kbr
creedkiller wrote:you have done some amazing work Scachi

100% agree. :joia: :joia:

Re: More buttons ? -> Custom DS4 snap-on device

PostPosted: Fri Dec 22, 2017 12:43 pm
by Scachi
I have improved the design a bit
frontNback.jpg
frontNback.jpg (134.39 KiB) Viewed 4007 times



And I have uploaded all the files for 3d printing and a description how to build this thing yourself to thingiverse :
https://www.thingiverse.com/thing:2722940
For printing you need the file "_all_parts.stl" and get the additional parts listed in the things detail page plus following the instructions in file _assembly_instructions.pdf if you feel adventurious enough to build your own ;-)

the vertical stand is also published:
https://www.thingiverse.com/thing:2722858

You can use the https://www.3dhubs.com/ service to find a store near your location to get the files printed if you don't own a 3d printer yourself

Re: More buttons ? -> Custom DS4 snap-on device

PostPosted: Fri Dec 22, 2017 4:04 pm
by bonefisher
:smile0517: Great work!

Re: More buttons ? -> Custom DS4 snap-on device

PostPosted: Fri Dec 22, 2017 4:20 pm
by Prototype
Nice work! Thank you for sharing, maybe i will try do one for myself :joia:

Re: More buttons ? -> Custom DS4 snap-on device

PostPosted: Fri Dec 22, 2017 8:09 pm
by J2Kbr
bonefisher wrote::smile0517: Great work!

prototype wrote:Nice work! Thank you for sharing, maybe i will try do one for myself :joia:

+1 +1 :joia: :joia:

Re: More buttons ? -> Custom DS4 snap-on device

PostPosted: Sat Dec 23, 2017 11:27 pm
by UK_Wildcats
Very cool stuff

Re: More buttons ? -> Custom DS4 snap-on device

PostPosted: Fri Jan 19, 2018 3:41 am
by creedkiller
Scachi wrote:
J2Kbr wrote:Very impressive. :joia: :joia:

A Bluetooth connection with the Titan Two to fetch relevante info to display on the OLED display seems the best option. To power the eletronics of your adapter, not sure what would be the best option. But it would be nice avoid the needed of two usb cables, maybe an usb adapter just to get power from the cable connected on the controller.


I already ordered a bluetooth module for the teensy board, can't wait to test it as soon it arrives.
Great idea to power both with one cable... going to try that one first ;-)

looking forward to updates on this project Scachi, especially regarding what bluetooth module you used for the teensy and how you ended up powering it