Page 1 of 1
Hyperkin Duke Xbox One (XB1) Wired Controller Support
Posted:
Mon May 28, 2018 3:18 amby Mellified
Please add support for the Hyperkin Duke Xbox One (XB1) wired controller to the Titan Two.
GitHub issueUSB descriptors:
[USB DESCRIPTOR]
12 01 00 02 FF FF FF 40 24 2E 52 06 01 01 01 02 03 01 09 02 60 00 03 01 00 A0 FA 09 04 00 00 02 FF 47 D0 00 07 05 01 03 40 00 04 07 05 81 03 40 00 04 09 04 01 00 00 FF 47 D0 00 09 04 01 01 02 FF 47 D0 00 07 05 08 01 E4 00 01 07 05 87 01 E4 00 01 09 04 02 00 00 FF 47 D0 00 09 04 02 01 02 FF 47 D0 00 07 05 03 02 40 00 00 07 05 83 02 40 00 00
[STRING 1 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 01 04 09 00 08
08 03 44 00 44 00 52 00
[STRING 2 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 02 04 09 00 1C
1C 03 48 00 79 00 70 00 65 00 72 00 6B 00 69 00 6E 00 20 00 44 00 75 00 6B 00 65 00
[STRING 3 DESCRIPTOR]
00 00 00 02 00 00 02 01 80 06 03 03 04 09 00 22
22 03 30 00 30 00 30 00 30 00 43 00 32 00 46 00 45 00 37 00 31 00 35 00 44 00 44 00 42 00 43 00 38 00
Re: Hyperkin Duke Xbox One (XB1) Wired Controller Support
Posted:
Tue May 29, 2018 1:52 pmby J2Kbr
Thank you for creating a GitHub feature request, I will be checking as soon as possible.
Re: Hyperkin Duke Xbox One (XB1) Wired Controller Support
Posted:
Sun Jun 03, 2018 3:22 amby NeoTechni
It works on my Titan Two and I haven't updated in weeks...
Re: Hyperkin Duke Xbox One (XB1) Wired Controller Support
Posted:
Mon Jun 04, 2018 12:05 pmby J2Kbr
NeoTechni wrote:It works on my Titan Two and I haven't updated in weeks...
I am surprised, the support for this controller was not yet implemented. Maybe it is being recognized as a HID controller. Going test...
Re: Hyperkin Duke Xbox One (XB1) Wired Controller Support
Posted:
Tue Jun 05, 2018 5:27 pmby Mellified
When I plug in the Hyperkin Duke to the T2 it powers up. When I connect the T2 to the Xbox however, it doesn't authenticate. If the T2 is already plugged into the XB1 the Duke doesn't power up.
Either way it doesn't actually authenticate to the XB1.
Re: Hyperkin Duke Xbox One (XB1) Wired Controller Support
Posted:
Thu Jun 07, 2018 8:15 amby J2Kbr
But can you see the controller working on Gtuner's Device Monitor? (I mean, when not plugged into the XB1 console).
Re: Hyperkin Duke Xbox One (XB1) Wired Controller Support
Posted:
Fri Jun 08, 2018 9:43 pmby Mellified
J2Kbr wrote:But can you see the controller working on Gtuner's Device Monitor? (I mean, when not plugged into the XB1 console).
I saw it pop up in the USB device window when I plugged it in.
Re: Hyperkin Duke Xbox One (XB1) Wired Controller Support
Posted:
Sat Jul 14, 2018 7:53 amby Mellified
Just confirmed with T2 firmware version 0.98.1.58 the following behaviors on my XB1X with the T2 powered externally:
1. Plug in official MS controller to port B, T2 authenticates. Duke works in port A showing startup logo and operates console.
(reset)
2. Plug in Duke to port B, T2 appears to authenticate - shows "0" on display, goes green. Duke rumbles extra long and does not show startup logo and does not operate console. Plug in official MS controller to port A and it does not function.
Happy to help troubleshoot further but I'm not sure what to do here.
Re: Hyperkin Duke Xbox One (XB1) Wired Controller Support
Posted:
Sun Jul 15, 2018 1:10 pmby J2Kbr
Thank you Mellified for the extra information.
Re: Hyperkin Duke Xbox One (XB1) Wired Controller Support
Posted:
Tue Jul 24, 2018 10:29 pmby Mellified
Note that I was testing the T2 + Duke on the XB1X.
