Titan Two Controller Connection Problems
5 posts
• Page 1 of 1
Titan Two Controller Connection Problems
My new Titan Two lose every 10-30 seconds the connection to my Xbox One.
Output and Input Leds flickering red and green and i become a error that no controller is connected.
i tested another cables, usb ports and xbox controller... same problem
i have upload my problem on youtube and i hope that anyone have a soulution.
https://www.youtube.com/watch?v=sdzIJmqUjC4&feature=youtu.be
thx
Output and Input Leds flickering red and green and i become a error that no controller is connected.
i tested another cables, usb ports and xbox controller... same problem
i have upload my problem on youtube and i hope that anyone have a soulution.
https://www.youtube.com/watch?v=sdzIJmqUjC4&feature=youtu.be
thx
-
alcuard - Private First Class
- Posts: 3
- Joined: Sat Mar 22, 2014 8:59 pm
Re: Titan Two Controller Connection Problems
when i use the titan two on my ps4 i got no problems... same when i use it with mouse and keyboard without a xbox one controller connected. i have testesd output protocol usb xbox one and automatic.
same error
same error
-
alcuard - Private First Class
- Posts: 3
- Joined: Sat Mar 22, 2014 8:59 pm
Re: Titan Two Controller Connection Problems
I see you have a short cable on the controller, please try use this cable to connect the Titan Two to the Xbox One console to check if this solves the problem. Thank you.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan Two Controller Connection Problems
i have testet all combinations of cables.. everytime the same problem
-
alcuard - Private First Class
- Posts: 3
- Joined: Sat Mar 22, 2014 8:59 pm
Re: Titan Two Controller Connection Problems
Thank your for trying.
Okay, please do the following:
1) Connect the Titan Two to computer by the PROG port, open Gtuner IV and go to Device Monitor. Plug the XB1 controller on the device and check if is possible to see the controller buttons and sticks working on Device Monitor.
2) Connect the Titan Two on the XB1 console without any controller plugged on it, does the display shows AU?
Thanks.
Okay, please do the following:
1) Connect the Titan Two to computer by the PROG port, open Gtuner IV and go to Device Monitor. Plug the XB1 controller on the device and check if is possible to see the controller buttons and sticks working on Device Monitor.
2) Connect the Titan Two on the XB1 console without any controller plugged on it, does the display shows AU?
Thanks.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 58 guests