Setting up Parsec with the Titan Two

Tutorials, How-tos and FAQs for the Titan Two device.

Setting up Parsec with the Titan Two

Postby Buffy » Sat Dec 07, 2019 1:32 am

Hardware needed:
    - Capture card (Elgato, AVerMedia, etc)
    - Titan Two (one per player you are using Parsec with)
    - Computer near your console
    - 3x MicroUSB Cables (2 for consoles that do not require authentication)
    - Controller for authentication (Setup: https://www.consoletuner.com/wiki/index ... es:systems)

Software needed:
___________________________________________________________________________________________________________

Steps to setup:

1. Using the microUSB cables...
    - Connect a cable to the T2 PROG port, and the other end to the computer
    - Connect a cable to the T2 OUT port, and the other end to the console
    - Connect a cable to port A or B on the T2, and the other end to your controller used for authentication
    - Verify the T2 has authenticated with the LED displaying '0'

2. Setup your capture card in a way you can watch live video from the console on your computer

3. Open and signup for Parsec
    - Add your friend
    - Click the gear button at the bottom of Parsec, and select "Hosting"
    - Scroll to the Approved Apps at bottom and add your capture card software and Gtuner IV to the list
    - Click "Host a Game" in Parsec and invite your friend to it.

4. Open Gtuner IV
    - Click the Tools menu, and click "KMG Capture..."
    - After the KMG Capture box is open, click the Gamepad/Joystick checkbox
    - (Optional) If you are hosting for multiple parsec users...
      - click the "Capture all Gamepad/Joystick" dropdown box and select the parsec controller per user

Image

5. Start screen sharing with your friend, and set your capture software full screen

6. Enjoy!
ConsoleTuner Support Team || Discord || Custom Scripts
User avatar
Buffy
Lieutenant
Lieutenant
 
Posts: 422
Joined: Wed Jul 20, 2016 5:23 am

Re: Setting up Parsec with the Titan Two

Postby Mad » Sat Dec 07, 2019 1:42 am

Good job Buffy :smile0517:
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord (2K / FPS)
Mad
Major General
Major General
 
Posts: 4532
Joined: Wed May 22, 2019 5:39 am

Re: Setting up Parsec with the Titan Two

Postby J2Kbr » Sun Dec 08, 2019 2:33 pm

Mad wrote:Good job Buffy :smile0517:

Indeed.

Thank you Buffy for making this tutorial. Appreciated.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Setting up Parsec with the Titan Two

Postby antithesis » Mon Dec 09, 2019 10:08 pm

Thanks Buffy!
Official Australian retailer for Titan One, Titan Two and XIM APEX at Mod Squad
User avatar
antithesis
Colonel
Colonel
 
Posts: 1912
Joined: Sat May 28, 2016 10:45 pm

Re: Setting up Parsec with the Titan Two

Postby mach1920 » Sun Feb 09, 2020 7:34 pm

Is Gtuner IV still compatible with the latest update of Parsec (Build 150-24)? I used to follow this method with older versions and it worked fine, but now the Device Monitor incorrectly shows that the DPad, left, and right sticks of the virtual gamepad created by Parsec are always being held to the left.

The Windows 10 game controller properties and https://html5gamepad.com/ do show that input is being correctly transmitted by Parsec, but Gtuner IV receives incorrect input. It still works fine for local controllers physically plugged into my machine.

I tested this with Gtuner IV 1.6 and also tried the older 32-bit 1.0 version, and had the same behavior in both releases.
User avatar
mach1920
Private
Private
 
Posts: 1
Joined: Sun Feb 09, 2020 7:21 pm

Re: Setting up Parsec with the Titan Two

Postby J2Kbr » Wed Feb 12, 2020 5:56 pm

Welcome march1920. I believe is with you I am taking about this issue over email, correct? Let me know if you prefer continue over email, or here. Thanks.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Setting up Parsec with the Titan Two

Postby gregnator » Fri Mar 27, 2020 9:11 pm

mach1920 wrote:Is Gtuner IV still compatible with the latest update of Parsec (Build 150-24)? I used to follow this method with older versions and it worked fine, but now the Device Monitor incorrectly shows that the DPad, left, and right sticks of the virtual gamepad created by Parsec are always being held to the left.

The Windows 10 game controller properties and https://html5gamepad.com/ do show that input is being correctly transmitted by Parsec, but Gtuner IV receives incorrect input. It still works fine for local controllers physically plugged into my machine.

I tested this with Gtuner IV 1.6 and also tried the older 32-bit 1.0 version, and had the same behavior in both releases.


I am having the exact same issue... Like what can I do? I bought Titan Two just for this purpose and it just keeps showing Dpad left... help?
User avatar
gregnator
Private First Class
Private First Class
 
Posts: 3
Joined: Fri Mar 27, 2020 9:10 pm

Re: Setting up Parsec with the Titan Two

Postby tomabrafix » Fri Mar 27, 2020 10:35 pm

I also have the exact same issue. Is there a solution?

I'm using GTuner IV 1.7.3.0 and Parsec Build 150-31.
User avatar
tomabrafix
Private
Private
 
Posts: 1
Joined: Fri Mar 27, 2020 10:33 pm

Re: Setting up Parsec with the Titan Two

Postby DontAtMe » Fri Mar 27, 2020 11:40 pm

The issue is with one of the latest parsec updates, I am not aware of any solutions atm.

EDIT: This issue has been resolved now by updating Parsec.
User avatar
DontAtMe
Captain
Captain
 
Posts: 502
Joined: Tue Oct 02, 2018 4:49 am

Re: Setting up Parsec with the Titan Two

Postby Spear14- » Sat Feb 06, 2021 6:31 pm

- (Optional) If you are hosting for multiple parsec users...
- click the "Capture all Gamepad/Joystick" dropdown box and select the parsec controller per user


Can someone elaborate on what is exactly meant by "select the parsec controller per user"?

I can capture the remote controller along with controller plugged into the Titan Two, but both controllers are being treated as the same controller.

I don't see any other settings on the KMG capture window nor anything else in GTuner.

I'm running GTuner IV 1.10.3.1. Titan Two Firmware 1.10.3.4 (had the problem with the previous firmware as well). I'm on Windows 10 Home 19041.746.

Thanks!
User avatar
Spear14-
Private
Private
 
Posts: 1
Joined: Sat Feb 06, 2021 6:25 pm

Next

Return to Tutorials and FAQs

Who is online

Users browsing this forum: No registered users and 34 guests