Setting up Parsec with the Titan Two
15 posts
• Page 1 of 2 • 1, 2
Setting up Parsec with the Titan Two
Hardware needed:
Software needed:
Steps to setup:
1. Using the microUSB cables...
2. Setup your capture card in a way you can watch live video from the console on your computer
3. Open and signup for Parsec
4. Open Gtuner IV
5. Start screen sharing with your friend, and set your capture software full screen
6. Enjoy!
- - Capture card (Elgato, AVerMedia, etc)
- Titan Two (one per player you are using Parsec with)
- Computer near your console
- 3x MicroUSB Cables (2 for consoles that do not require authentication)
- Controller for authentication (Setup: https://www.consoletuner.com/wiki/index ... es:systems)
Software needed:
- - 64-bit Windows
- Gtuner IV (https://www.consoletuner.com/titan-two-downloads/)
- Parsec (https://parsecgaming.com/downloads/ - your friend must install this and sign up too)
Steps to setup:
1. Using the microUSB cables...
- - Connect a cable to the T2 PROG port, and the other end to the computer
- Connect a cable to the T2 OUT port, and the other end to the console
- Connect a cable to port A or B on the T2, and the other end to your controller used for authentication
- Verify the T2 has authenticated with the LED displaying '0'
2. Setup your capture card in a way you can watch live video from the console on your computer
3. Open and signup for Parsec
- - Add your friend
- Click the gear button at the bottom of Parsec, and select "Hosting"
- Scroll to the Approved Apps at bottom and add your capture card software and Gtuner IV to the list
- Click "Host a Game" in Parsec and invite your friend to it.
4. Open Gtuner IV
- - Click the Tools menu, and click "KMG Capture..."
- After the KMG Capture box is open, click the Gamepad/Joystick checkbox
- (Optional) If you are hosting for multiple parsec users...
- - click the "Capture all Gamepad/Joystick" dropdown box and select the parsec controller per user
5. Start screen sharing with your friend, and set your capture software full screen
6. Enjoy!
-
Buffy - Lieutenant
- Posts: 422
- Joined: Wed Jul 20, 2016 5:23 am
Re: Setting up Parsec with the Titan Two
Good job Buffy
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord (2K / FPS)
- Mad
- Major General
- Posts: 4533
- Joined: Wed May 22, 2019 5:39 am
Re: Setting up Parsec with the Titan Two
Mad wrote:Good job Buffy
Indeed.
Thank you Buffy for making this tutorial. Appreciated.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Setting up Parsec with the Titan Two
Thanks Buffy!
-
antithesis - Colonel
- Posts: 1912
- Joined: Sat May 28, 2016 10:45 pm
Re: Setting up Parsec with the Titan Two
Is Gtuner IV still compatible with the latest update of Parsec (Build 150-24)? I used to follow this method with older versions and it worked fine, but now the Device Monitor incorrectly shows that the DPad, left, and right sticks of the virtual gamepad created by Parsec are always being held to the left.
The Windows 10 game controller properties and https://html5gamepad.com/ do show that input is being correctly transmitted by Parsec, but Gtuner IV receives incorrect input. It still works fine for local controllers physically plugged into my machine.
I tested this with Gtuner IV 1.6 and also tried the older 32-bit 1.0 version, and had the same behavior in both releases.
The Windows 10 game controller properties and https://html5gamepad.com/ do show that input is being correctly transmitted by Parsec, but Gtuner IV receives incorrect input. It still works fine for local controllers physically plugged into my machine.
I tested this with Gtuner IV 1.6 and also tried the older 32-bit 1.0 version, and had the same behavior in both releases.
-
mach1920 - Private
- Posts: 1
- Joined: Sun Feb 09, 2020 7:21 pm
Re: Setting up Parsec with the Titan Two
Welcome march1920. I believe is with you I am taking about this issue over email, correct? Let me know if you prefer continue over email, or here. Thanks.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Setting up Parsec with the Titan Two
mach1920 wrote:Is Gtuner IV still compatible with the latest update of Parsec (Build 150-24)? I used to follow this method with older versions and it worked fine, but now the Device Monitor incorrectly shows that the DPad, left, and right sticks of the virtual gamepad created by Parsec are always being held to the left.
The Windows 10 game controller properties and https://html5gamepad.com/ do show that input is being correctly transmitted by Parsec, but Gtuner IV receives incorrect input. It still works fine for local controllers physically plugged into my machine.
I tested this with Gtuner IV 1.6 and also tried the older 32-bit 1.0 version, and had the same behavior in both releases.
I am having the exact same issue... Like what can I do? I bought Titan Two just for this purpose and it just keeps showing Dpad left... help?
-
gregnator - Private First Class
- Posts: 3
- Joined: Fri Mar 27, 2020 9:10 pm
Re: Setting up Parsec with the Titan Two
I also have the exact same issue. Is there a solution?
I'm using GTuner IV 1.7.3.0 and Parsec Build 150-31.
I'm using GTuner IV 1.7.3.0 and Parsec Build 150-31.
-
tomabrafix - Private
- Posts: 1
- Joined: Fri Mar 27, 2020 10:33 pm
Re: Setting up Parsec with the Titan Two
The issue is with one of the latest parsec updates, I am not aware of any solutions atm.
EDIT: This issue has been resolved now by updating Parsec.
EDIT: This issue has been resolved now by updating Parsec.
-
DontAtMe - Captain
- Posts: 502
- Joined: Tue Oct 02, 2018 4:49 am
Re: Setting up Parsec with the Titan Two
- (Optional) If you are hosting for multiple parsec users...
- click the "Capture all Gamepad/Joystick" dropdown box and select the parsec controller per user
Can someone elaborate on what is exactly meant by "select the parsec controller per user"?
I can capture the remote controller along with controller plugged into the Titan Two, but both controllers are being treated as the same controller.
I don't see any other settings on the KMG capture window nor anything else in GTuner.
I'm running GTuner IV 1.10.3.1. Titan Two Firmware 1.10.3.4 (had the problem with the previous firmware as well). I'm on Windows 10 Home 19041.746.
Thanks!
-
Spear14- - Private
- Posts: 1
- Joined: Sat Feb 06, 2021 6:25 pm
15 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 42 guests