Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X|S
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
does the dual Sense controller have to input A or can i put the quadstick in input A and dual Sense controller in PROG because i had it like that at first but it kept reset every time, till i put the horipad in input B dual Sense controller to input A and the quadstick in PROG it stopped restarting every 7/8 minutes but i ran into the problem with the touchpad. can you help with the input translator remapping please
-
Darkpirategeneral - Master Sergeant
- Posts: 34
- Joined: Tue Dec 24, 2019 7:44 am
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
Darkpirategeneral wrote:does the dual Sense controller have to input A or can i put the quadstick in input A and dual Sense controller in PROG because i had it like that at first but it kept reset every time, till i put the horipad in input B dual Sense controller to input A and the quadstick in PROG it stopped restarting every 7/8 minutes
The DualSense can be used on PROG port, but it will load the HID driver and not all controller features will be functional.
Darkpirategeneral wrote:but i ran into the problem with the touchpad. can you help with the input translator remapping please
Here an Controller Remapper configuration to swap the Touch-click with share button:
- Code: Select all
GIVRMP:3F001102030405060708090A0B0C0D0E0F100112131415161718191A1B1C1D1E1F20212223242526272829
Create a new GIT file (Input Translator), then open the Controller Remapper. Copy the above code and paste on the opened Controller Remapper by clicking on the button with blue arrow pointing down at the right side.
After that, just drag and drop this GIT file to a memory slot for use.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
thanks for helping me, well this press the touchpad instead of the share button when the quadstick is in PROG?
-
Darkpirategeneral - Master Sergeant
- Posts: 34
- Joined: Tue Dec 24, 2019 7:44 am
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
Darkpirategeneral wrote:thanks for helping me, well this press the touchpad instead of the share button when the quadstick is in PROG?
yes, this controller remapping will also work on PROG port. If this is not desired, you can set the input translator to be applied to only a specif USB input port (this is done on the Gtuner's Input Translator editor).
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
any update on haptic vibration turning into vibration for the elite series 2 on the ps5
-
JohnnyBoi404 - Corporal
- Posts: 4
- Joined: Fri Dec 25, 2020 8:24 pm
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
I'm sure this has been covered in this post but it's 60 pages long at this point. Has a resolution for the controller disconnect issue been found?
-
Gobot - Sergeant Major
- Posts: 100
- Joined: Fri Apr 22, 2016 8:59 pm
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
Gobot wrote:I'm sure this has been covered in this post but it's 60 pages long at this point. Has a resolution for the controller disconnect issue been found?
Are you talking about PS5? A third party PS4 controller is needed for authentication.
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord (2K / FPS)
- Mad
- Major General
- Posts: 4533
- Joined: Wed May 22, 2019 5:39 am
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
Mad wrote:Gobot wrote:I'm sure this has been covered in this post but it's 60 pages long at this point. Has a resolution for the controller disconnect issue been found?
Are you talking about PS5? A third party PS4 controller is needed for authentication.
Yeah, I use an Astro C40 and was wondering if there's been a resolution to it disconnecting every 7 minutes 30 seconds?
-
Gobot - Sergeant Major
- Posts: 100
- Joined: Fri Apr 22, 2016 8:59 pm
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
Latest 1.10.3.2 update, very high cpu usage?
Edit: without any packs loaded it seems ok at 2%, but just about all scripts show roughly double the cpu usage increase
Edit: without any packs loaded it seems ok at 2%, but just about all scripts show roughly double the cpu usage increase
-
ogpain - Staff Sergeant
- Posts: 15
- Joined: Fri Oct 26, 2018 5:36 pm
Re: Titan Two and Gtuner IV: PlayStation 5 and Xbox Series X
Gobot wrote:Yeah, I use an Astro C40 and was wondering if there's been a resolution to it disconnecting every 7 minutes 30 seconds?
Please try with the latest firmware (1.10.3.2), it should fix the issue with Astro C40.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Who is online
Users browsing this forum: No registered users and 50 guests