[Videos] Unboxing, Comparison, Teardown, Gameplay

Tutorials, How-tos and FAQs for the Titan Two device.

[Videos] Unboxing, Comparison, Teardown, Gameplay

Postby J2Kbr » Fri Nov 11, 2016 8:26 am

TITAN TWO UNBOXING:


TITAN TWO COMPARISON WITH TITAN ONE AND TEARDOWN:


TITAN TWO SCRIPT CAPABILITIES: Rainbow Six Siege


TITAN TWO: How To Use Wired Headsets


TITAN TWO: 10 Tips and Tricks


TITAN TWO: Using on PS4


TITAN TWO: Picking A Power Supply & When To Use It!


TITAN TWO: Mouse and Keyboard on PS4 & Xbox One | Titan Two Tutorial | Wireless
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: [Videos] Unboxing, Comparison, Teardown, Gameplay

Postby kenshin80012 » Sun Nov 20, 2016 2:49 am

thanks for the post!
User avatar
kenshin80012
Command Sergeant Major
Command Sergeant Major
 
Posts: 148
Joined: Mon Apr 18, 2016 3:48 pm

Re: [Videos] Unboxing, Comparison, Teardown, Gameplay

Postby pablosscripts » Sat Jul 08, 2017 1:10 am

This is probably the best video I've seen yet. He's even gone into detail about the size of the head, which I've been wanting info on but haven't been able to find anywhere else. Check it out:

Setup: XIM Apex, T2, K780 keyboard, G Pro Wireless mouse, SteelSeries 4HD pad, DXRacer armrest, LucidSound LS30 headset, Netduma router, Ubiquiti UniFi AP LR

My R6 script: https://youtu.be/x-9NtxyySVM
User avatar
pablosscripts
Brigadier General
Brigadier General
 
Posts: 1976
Joined: Tue Nov 24, 2015 6:27 am

Re: [Videos] Unboxing, Comparison, Teardown, Gameplay

Postby Maxxgold » Sat Mar 17, 2018 4:06 pm

Thank you for this : )
User avatar
Maxxgold
Sergeant Major of the Army
Sergeant Major of the Army
 
Posts: 265
Joined: Mon Aug 01, 2016 8:43 pm

Re: [Videos] Unboxing, Comparison, Teardown, Gameplay

Postby Bleak5170 » Wed May 09, 2018 2:04 pm

Cannot recommend these amazing videos enough.
User avatar
Bleak5170
Sergeant Major of the Army
Sergeant Major of the Army
 
Posts: 278
Joined: Fri Aug 28, 2015 10:04 pm

Re: [Videos] Unboxing, Comparison, Teardown, Gameplay

Postby BigMalaka » Mon Nov 12, 2018 5:55 pm

Thanks for the videos. I just bought one of these (total impulse buy) to try out with my XIM Apex. I've never used anything like this before so the videos will come in handy. If anyone can point me in the right direction of some scripts for BO4 (XB1X), that would be great. I'm trying to learn as much as I can about this before it arrives.
User avatar
BigMalaka
Corporal
Corporal
 
Posts: 4
Joined: Mon Nov 12, 2018 4:13 pm

Re: [Videos] Unboxing, Comparison, Teardown, Gameplay

Postby pablosscripts » Mon Nov 12, 2018 9:48 pm

BigMalaka wrote:Thanks for the videos. I just bought one of these (total impulse buy) to try out with my XIM Apex. I've never used anything like this before so the videos will come in handy. If anyone can point me in the right direction of some scripts for BO4 (XB1X), that would be great. I'm trying to learn as much as I can about this before it arrives.


Try out mine. I mostly focus on quality of life changes, and try to avoid tracking issues which makes (some) of my scripts easier to use for beginners (tracking issues means features that are turned on and off and if not synced with the game you will get terribly confused). Search for the COD QoL script.
Setup: XIM Apex, T2, K780 keyboard, G Pro Wireless mouse, SteelSeries 4HD pad, DXRacer armrest, LucidSound LS30 headset, Netduma router, Ubiquiti UniFi AP LR

My R6 script: https://youtu.be/x-9NtxyySVM
User avatar
pablosscripts
Brigadier General
Brigadier General
 
Posts: 1976
Joined: Tue Nov 24, 2015 6:27 am

Re: [Videos] Unboxing, Comparison, Teardown, Gameplay

Postby DRYOLO » Thu Nov 15, 2018 8:29 pm

hi xbox one player here,
is there any videos on how to make your own macros? i've looked it up but cant find much basically i want to make this
when i hold down (X)
my right trigger will play a macro that looks like this

Left Trigger down
adjustable time delay
Right Trigger down
055 ms delay
Right Trigger up
055 ms delay
Left Trigger up
055 ms delay

and another which is hard to explain.
1. a button to activate it.
2. a button i can press and hold.
3. on release it presses another button and deactivates

eg.
1. left d-pad to activate
2. i can press and hold right trigger
3. on release of the right trigger it presses left trigger and deactivates until i press left d-pad again

i would really like to find out how to make these, if you can point me in the right direction i would be very thankful.
if this makes no sense please cross your eyes... now smile.
User avatar
DRYOLO
Corporal
Corporal
 
Posts: 4
Joined: Mon Jul 30, 2018 11:19 pm

Re: [Videos] Unboxing, Comparison, Teardown, Gameplay

Postby Scachi » Thu Nov 15, 2018 10:59 pm

DRYOLO wrote:hi xbox one player here,
is there any videos on how to make your own macros? i've looked it up but cant find much basically i want to make this
when i hold down (X)
my right trigger will play a macro that looks like this

Left Trigger down
adjustable time delay
Right Trigger down
055 ms delay
Right Trigger up
055 ms delay
Left Trigger up
055 ms delay

and another which is hard to explain.
1. a button to activate it.
2. a button i can press and hold.
3. on release it presses another button and deactivates

eg.
1. left d-pad to activate
2. i can press and hold right trigger
3. on release of the right trigger it presses left trigger and deactivates until i press left d-pad again

i would really like to find out how to make these, if you can point me in the right direction i would be very thankful.
if this makes no sense please cross your eyes... now smile.


Here is a full example with both things you said, configurable via Interactive Configuration (GTuner IV -> the gear icon of the T2 slot you put that script in).

Screenshot of the Interactive Configuration:
ic_2things.jpg
ic_2things.jpg (109.58 KiB) Viewed 10185 times


The full code:
Code: Select all
 
/* Interactive configuration - click the gear like symbol in the T2 slot list in GTuner IV */
 
 
// LTRTRTLT combo stuff
uint16 LTPt, RTPt, RTRt, LTRt; // times of lt press, rt press, rt release, lt release
uint16 LTRTRTLTt; // time to hold X before run the combo
 
// hard to explain stuff
uint8   htesButton2Activate;  // button used to activate
uint8   htesButton2Hold;      // button to hold
uint16  htesButton2Holdt;     // time to hold that button before activate
uint8   htesButton2Press;     // press that button on release of the previous
uint16  htesButton2PressDt;   // wait some time before pressing that button
uint16  htesButton2PressPt;   // time to press that button
uint16  htesButton2PressRt;   // time to release that button
uint8   htesActive=0;         // state tracker
 
init {
  pmem_load();
 
  // LTRTRTLT combo stuff
  pmem_read(0,&LTPt); // time of LT press
  pmem_read(2,&RTPt); // time of RT press
  pmem_read(4,&RTRt); // time of RT release
  pmem_read(6,&LTRt); // time of LT release
  pmem_read(8,&LTRTRTLTt); // time to hold X before run the combo
 
  // hard to explain stuff
  pmem_read(10,&htesButton2Activate);
  pmem_read(11,&htesButton2Hold);
  pmem_read(12,&htesButton2Holdt);
  pmem_read(14,&htesButton2Press);
  pmem_read(15,&htesButton2PressDt);
  pmem_read(17,&htesButton2PressPt);
  pmem_read(19,&htesButton2PressRt);
}
 
main {
  // LTRTRTLT
  if (check_active(BUTTON_17,LTRTRTLTt) && get_actual(BUTTON_5)) combo_run(cLTRTRTLT);
 
  // hard to explain stuff
  if (event_active(htesButton2Activate)) htesActive=1;
  if (htesActive==1 && check_active(htesButton2Hold,htesButton2Holdt)) htesActive=2;
  if (htesActive==2 && event_release(htesButton2Hold)) combo_run(cHTES);
}
 
combo cLTRTRTLT {
  set_val(BUTTON_5,0)// RT release
  set_val(BUTTON_8,100);// LT press
  wait(LTPt);           // keep it pressed
  set_val(BUTTON_5,100);// RT press
  wait(RTPt);           // keep it pressed
  set_val(BUTTON_5,0)// RT release
  wait(RTRt);           // keep it released
  set_val(BUTTON_8,0)// LT release
  set_val(BUTTON_5,0)// RT release
  wait(LTRt);           // keep it released
}
 
combo cHTES {
  htesActive=0;                 // reset state
  wait(htesButton2PressDt);     // initial wait
  set_val(htesButton2Press,100);// press the button
  wait(htesButton2PressPt);     // keep it pressed
  set_val(htesButton2Press,0)// release the button
  wait(htesButton2PressRt);     // keep it released
}
 
 
/*
<cfgdesc>
 
[Example Request]
control     = info
shortdesc    = <<<MULTILINE
<a href="https://www.consoletuner.com/forum/viewtopic.php?f=27&t=5184&p=74594#p74594">Example Request</>
MULTILINE
 
 
// -----------------------------------------------------------------------------
[LT-RT-RT-LT Combo Config]
collapsible = 1
control     = info
shortdesc   = <<<MULTILINE
Configure the "LT-RT-RT-LT" combo
MULTILINE
 
[LT-RT-RT-LT LT X]
group       = TRUE
control     = spinbox
shortdesc   = X Button hold time before RT can start the combo (0 - 4000)ms
byteoffset  = 8
bitsize     = 16
step        = 1
default     = 0
minimum     = 0
maximum     = 4000
 
 
[LT-RT-RT-LT LT P]
group       = TRUE
control     = spinbox
shortdesc   = LT Press Time (10 - 4000)ms
byteoffset  = 0
bitsize     = 16
step        = 1
default     = 55
minimum     = 10
maximum     = 4000
 
[LT-RT-RT-LT RT P]
group       = TRUE
control     = spinbox
shortdesc   = RT Press Time (10 - 4000)ms
byteoffset  = 2
bitsize     = 16
step        = 1
default     = 55
minimum     = 10
maximum     = 4000
 
[LT-RT-RT-LT RT R]
group       = TRUE
control     = spinbox
shortdesc   = RT Release Time (10 - 4000)ms
byteoffset  = 4
bitsize     = 16
step        = 1
default     = 55
minimum     = 10
maximum     = 4000
 
[LT-RT-RT-LT LT R]
group       = TRUE
control     = spinbox
shortdesc   = LT Release Time (10 - 4000)ms
byteoffset  = 6
bitsize     = 16
step        = 1
default     = 55
minimum     = 10
maximum     = 4000
 
 
// -----------------------------------------------------------------------------
[HTES Combo Config]
collapsible = 1
control     = info
shortdesc   = <<<MULTILINE
Configure the "hard to explain stuff" combo
MULTILINE
 
[HTES Btn Activate]
group       = TRUE
control     = combobox
shortdesc   = Button to Activate the combo
byteoffset  = 10
bitsize     = 8
default     = 11
item        = BUTTON_ 1 : Xbox
item        = BUTTON_ 2 : View
item        = BUTTON_ 3 : Menu
item        = BUTTON_ 4 : RB
item        = BUTTON_ 5 : RT
item        = BUTTON_ 6 : RS
item        = BUTTON_ 7 : LB
item        = BUTTON_ 8 : LT
item        = BUTTON_ 9 : LS
item        = BUTTON_10 : DPad-Up
item        = BUTTON_11 : DPad-Down
item        = BUTTON_12 : DPad-Left
item        = BUTTON_13 : DPad-Right
item        = BUTTON_14 : Y
item        = BUTTON_15 : B
item        = BUTTON_16 : A
item        = BUTTON_17 : X
item        = BUTTON_18 : P1 (Elite)
item        = BUTTON_19 : P2 (Elite)
item        = BUTTON_20 : P3 (Elite)
item        = BUTTON_21 : P4 (Elite)
 
[HTES Btn Hold]
group       = TRUE
control     = combobox
shortdesc   = Button to Hold
byteoffset  = 11
bitsize     = 8
default     = 4
item        = BUTTON_ 1 : Xbox
item        = BUTTON_ 2 : View
item        = BUTTON_ 3 : Menu
item        = BUTTON_ 4 : RB
item        = BUTTON_ 5 : RT
item        = BUTTON_ 6 : RS
item        = BUTTON_ 7 : LB
item        = BUTTON_ 8 : LT
item        = BUTTON_ 9 : LS
item        = BUTTON_10 : DPad-Up
item        = BUTTON_11 : DPad-Down
item        = BUTTON_12 : DPad-Left
item        = BUTTON_13 : DPad-Right
item        = BUTTON_14 : Y
item        = BUTTON_15 : B
item        = BUTTON_16 : A
item        = BUTTON_17 : X
item        = BUTTON_18 : P1 (Elite)
item        = BUTTON_19 : P2 (Elite)
item        = BUTTON_20 : P3 (Elite)
item        = BUTTON_21 : P4 (Elite)
 
[HTES Btn Hold Time]
group       = TRUE
control     = spinbox
shortdesc   = Minimum Time to hold "Button to Hold" to trigger the press after release (10 - 4000)ms
byteoffset  = 12
bitsize     = 16
step        = 1
default     = 100
minimum     = 10
maximum     = 4000
 
 
[HTES Btn Press Next]
group       = TRUE
control     = combobox
shortdesc   = Button to automatically press after the release of "Button to Hold"
byteoffset  = 14
bitsize     = 8
default     = 7
item        = BUTTON_ 1 : Xbox
item        = BUTTON_ 2 : View
item        = BUTTON_ 3 : Menu
item        = BUTTON_ 4 : RB
item        = BUTTON_ 5 : RT
item        = BUTTON_ 6 : RS
item        = BUTTON_ 7 : LB
item        = BUTTON_ 8 : LT
item        = BUTTON_ 9 : LS
item        = BUTTON_10 : DPad-Up
item        = BUTTON_11 : DPad-Down
item        = BUTTON_12 : DPad-Left
item        = BUTTON_13 : DPad-Right
item        = BUTTON_14 : Y
item        = BUTTON_15 : B
item        = BUTTON_16 : A
item        = BUTTON_17 : X
item        = BUTTON_18 : P1 (Elite)
item        = BUTTON_19 : P2 (Elite)
item        = BUTTON_20 : P3 (Elite)
item        = BUTTON_21 : P4 (Elite)
 
[HTES Btn Press Next Delay]
group       = TRUE
control     = spinbox
shortdesc   = Time to wait after the release of "Button to Hold" before the automatic press (0 - 4000)ms
byteoffset  = 15
bitsize     = 16
step        = 1
default     = 40
minimum     = 0
maximum     = 4000
 
[HTES Btn Press Next Press]
group       = TRUE
control     = spinbox
shortdesc   = Time the automatic button is pressed (10 - 4000)ms
byteoffset  = 17
bitsize     = 16
step        = 1
default     = 40
minimum     = 10
maximum     = 4000
 
[HTES Btn Press Next Release]
group       = TRUE
control     = spinbox
shortdesc   = Time the automatic button is released (10 - 4000)ms
byteoffset  = 19
bitsize     = 16
step        = 1
default     = 40
minimum     = 10
maximum     = 4000
 
</cfgdesc>
*/




Here is the same thing without that Interactive Configuration stuff, to change the buttons/timing you need to edit the values of the variables above the init section :
Code: Select all
// LTRTRTLT combo stuff
uint16 LTPt=55;   // times of lt press
uint16 RTPt=55;   // times of rt press
uint16 RTRt=55;   // times of rt release
uint16 LTRt=55;   // times of lt release
uint16 LTRTRTLTt; // time to hold X before run the combo
 
// hard to explain stuff
uint8   htesButton2Activate=BUTTON_12;// button used to activate, DPad-Left / hit F1 in GTuner IV for list of buttons
uint8   htesButton2Hold=BUTTON_5;     // button to hold , RT / hit F1 in GTuner IV for list of buttons
uint16  htesButton2Holdt=0;           // time to hold that button before activate
uint8   htesButton2Press=BUTTON_8;    // press that button, LT on release of the previous / hit F1 in GTuner IV for list of buttons
uint16  htesButton2PressDt=40;        // wait some time before automatic press of that button
uint16  htesButton2PressPt=100;       // time to press that button
uint16  htesButton2PressRt=100;       // time to release that button
uint8   htesActive=0;                 // state tracker
 
init {
}
 
main {
  // LTRTRTLT
  if (check_active(BUTTON_17,LTRTRTLTt) && get_actual(BUTTON_5)) combo_run(cLTRTRTLT);
 
  // hard to explain stuff
  if (event_active(htesButton2Activate)) htesActive=1;
  if (htesActive==1 && check_active(htesButton2Hold,htesButton2Holdt)) htesActive=2;
  if (htesActive==2 && event_release(htesButton2Hold)) combo_run(cHTES);
}
 
combo cLTRTRTLT {
  set_val(BUTTON_5,0)// RT release
  set_val(BUTTON_8,100);// LT press
  wait(LTPt);           // keep it pressed
  set_val(BUTTON_5,100);// RT press
  wait(RTPt);           // keep it pressed
  set_val(BUTTON_5,0)// RT release
  wait(RTRt);           // keep it released
  set_val(BUTTON_8,0)// LT release
  set_val(BUTTON_5,0)// RT release
  wait(LTRt);           // keep it released
}
 
combo cHTES {
  htesActive=0;                 // reset state
  wait(htesButton2PressDt);     // initial wait
  set_val(htesButton2Press,100);// press the button
  wait(htesButton2PressPt);     // keep it pressed
  set_val(htesButton2Press,0)// release the button
  wait(htesButton2PressRt);     // keep it released
}
 





Lookup the gpc function names/keywords in the documentation: https://www.consoletuner.com/wiki/index ... _reference
User avatar
Scachi
Brigadier General
Brigadier General
 
Posts: 3044
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: [Videos] Unboxing, Comparison, Teardown, Gameplay

Postby DRYOLO » Sat Nov 17, 2018 5:05 pm

wow! thank you this is way more than i expected you are awesome
User avatar
DRYOLO
Corporal
Corporal
 
Posts: 4
Joined: Mon Jul 30, 2018 11:19 pm


Return to Tutorials and FAQs

Who is online

Users browsing this forum: No registered users and 28 guests