Crash course on using the Input Translator

Tutorials, How-tos and FAQs for the Titan Two device.

Re: Crash course on using the Input Translator

Postby J2Kbr » Thu Dec 10, 2020 11:24 am

Aos_Si wrote:There are a couple of things that I can't understand: a) How to get the hat button on the thrust controller (left stick) to work. b) how to use input translater.

The first step for that is check to what input the hat button is mapped to. This can be done using Gtuner's Device monitor, as the following:

- Connect the Titan Two to your computer via PROG port;
- Open Gtuner IV and go to Device Monitor;
- Connect the thrust controller the the Titan Two;
- Press the hat button and check which button is activated.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Crash course on using the Input Translator

Postby Aos_Si » Thu Dec 10, 2020 11:47 am

J2Kbr wrote:
Aos_Si wrote:There are a couple of things that I can't understand: a) How to get the hat button on the thrust controller (left stick) to work. b) how to use input translater.

The first step for that is check to what input the hat button is mapped to. This can be done using Gtuner's Device monitor, as the following:

- Connect the Titan Two to your computer via PROG port;
- Open Gtuner IV and go to Device Monitor;
- Connect the thrust controller the the Titan Two;
- Press the hat button and check which button is activated.


The left hat switch doesn't do anything on device monitor, nor does the 'i' switch. Hat is a four way switch/button and 'i' is just a button. Additionally, the top hat button, on the right stick only works in two of the four directions. Up and right work but down and left don't.
User avatar
Aos_Si
Sergeant
Sergeant
 
Posts: 6
Joined: Mon Dec 07, 2020 2:09 pm

Re: Crash course on using the Input Translator

Postby J2Kbr » Thu Dec 10, 2020 10:54 pm

Thank you for checking.

Please capture and post here the USB descriptors of your X52 Hotas so I can check the compatibility with the Titan Two.

On Gtuner IV, with the Titan Two connected to computer, go to top menu Tools -> "Fetch Descriptors ...". Now plug the X52 Hotas to any port on the Titan Two. The descriptors will show in the window, click on the button "Copy Descriptors" and post here.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Crash course on using the Input Translator

Postby Aos_Si » Fri Dec 11, 2020 8:59 am

J2Kbr wrote:Thank you for checking.

Please capture and post here the USB descriptors of your X52 Hotas so I can check the compatibility with the Titan Two.

On Gtuner IV, with the Titan Two connected to computer, go to top menu Tools -> "Fetch Descriptors ...". Now plug the X52 Hotas to any port on the Titan Two. The descriptors will show in the window, click on the button "Copy Descriptors" and post here.


[USB DESCRIPTOR]
12 01 00 02 00 00 00 08 A3 06 62 07 00 20 01 02 00 01 09 02 22 00 01 01 00 80 73 09 04 00 00 01 03 00 00 00 09 21 11 01 00 01 22 7D 00 07 05 81 03 10 00 0A

[STRING 1 DESCRIPTOR]
00 00 00 03 00 00 02 01 80 06 03 01 04 09 00 12
12 03 4C 00 6F 00 67 00 69 00 74 00 65 00 63 00 68 00

[STRING 2 DESCRIPTOR]
00 00 00 03 00 00 02 01 80 06 03 02 04 09 00 38
38 03 58 00 35 00 32 00 20 00 50 00 72 00 6F 00 66 00 65 00 73 00 73 00 69 00 6F 00 6E 00 61 00 6C 00 20 00 48 00 2E 00 4F 00 2E 00 54 00 2E 00 41 00 2E 00 53 00 2E 00

[INTERFACE 0 HID DESCRIPTOR]
00 00 00 03 00 00 02 01 81 06 22 00 00 00 00 7D
05 01 09 04 A1 01 09 01 A1 00 09 30 09 31 15 00 26 FF 03 75 0A 95 02 81 02 75 02 95 01 81 01 09 35 15 00 26 FF 03 75 0A 95 01 81 02 09 32 09 33 09 34 09 36 15 00 26 FF 00 75 08 95 04 81 02 05 09 19 01 29 27 15 00 25 01 95 27 75 01 81 02 75 05 95 01 81 01 05 01 09 39 15 01 25 08 35 00 46 3B 01 66 14 00 75 04 95 01 81 42 05 05 09 24 09 26 15 00 25 0F 75 04 95 02 81 02 C0 C0
User avatar
Aos_Si
Sergeant
Sergeant
 
Posts: 6
Joined: Mon Dec 07, 2020 2:09 pm

Re: Crash course on using the Input Translator

Postby J2Kbr » Fri Dec 11, 2020 10:24 am

Thank you, I will be checking as soon as possible.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Crash course on using the Input Translator

Postby Scaggiante » Mon Dec 28, 2020 4:16 am

I want to know how to know the perfectly dead zone to put in the smart transalator? I didn’t find any tutorials, only for titan two with the circle test...
User avatar
Scaggiante
Sergeant
Sergeant
 
Posts: 8
Joined: Mon Dec 28, 2020 4:12 am

Re: Crash course on using the Input Translator

Postby J2Kbr » Wed Dec 30, 2020 1:22 pm

Scaggiante wrote:I want to know how to know the perfectly dead zone to put in the smart transalator? I didn’t find any tutorials, only for titan two with the circle test...

For what game you would like to know the deadzone? Thanks.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Crash course on using the Input Translator

Postby Scaggiante » Wed Jan 06, 2021 4:34 am

J2Kbr wrote:
Scaggiante wrote:I want to know how to know the perfectly dead zone to put in the smart transalator? I didn’t find any tutorials, only for titan two with the circle test...

For what game you would like to know the deadzone? Thanks.

It’s not a for a game, i want to know how i find it, to create my own input translator, because i see that it isn’t all the games that has the input translator ready..
User avatar
Scaggiante
Sergeant
Sergeant
 
Posts: 8
Joined: Mon Dec 28, 2020 4:12 am

Re: Crash course on using the Input Translator

Postby J2Kbr » Thu Jan 07, 2021 3:06 pm

I have a script the helps find the exact deadzone values. Please PM me around Jan 14th (when I will be back to the office) so I can send you a copy of this script. Thanks.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Crash course on using the Input Translator

Postby evanmichaels » Sat Apr 03, 2021 6:07 pm

im absolutely clueless and need help. im trying to bind my L2 to my SHIFT key on keyboard and its not working. i created new input translator, keyboard remapper, SHIFT - L2. i save and it doesnt recognize this. what am i doing wrong???
User avatar
evanmichaels
Staff Sergeant
Staff Sergeant
 
Posts: 11
Joined: Sun Mar 14, 2021 11:44 pm

Previous

Return to Tutorials and FAQs

Who is online

Users browsing this forum: No registered users and 57 guests