need lagacy sticks
17 posts
• Page 1 of 2 • 1, 2
need lagacy sticks
i just cant play shooters with out legcy sticks. is there to do this ? i have a few shooters like doom that dont have legacy sticks
-
xAUSTIN316x - Sergeant
- Posts: 6
- Joined: Sat Nov 19, 2016 3:48 am
Re: need lagacy sticks
Sorry for the late reply. Okay, assuming this is what you referred as legacy sticks:
The script below remaps the sticks to get the above result:
The script below remaps the sticks to get the above result:
- Code: Select all
main {
swap(9, 11);
}
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: need lagacy sticks
um this doesn't tell me anything
-
xAUSTIN316x - Sergeant
- Posts: 6
- Joined: Sat Nov 19, 2016 3:48 am
Re: need lagacy sticks
J2Kbr wrote:
- Code: Select all
main {
swap(9, 11);
}
Use this code and it will swap button 9 (PS4_RX) and 11 (PS4_LX) to work as legacy control.
Console tuner since my 1st controller.
Scripting, a game in the game.
Believe or dare, It's Titanic!
Scripting, a game in the game.
Believe or dare, It's Titanic!
-
Prototype - Major General
- Posts: 3251
- Joined: Sun Dec 16, 2012 1:43 pm
Re: need lagacy sticks
The basic steps to load a GPC script into Titan One are:
1) Copy and paste the code into a blank document in Gtuner's Compiler panel.
2) Save the script.
3) Go to the the Programmer Panel
4) Drag-and-drop the script name to any memory slot.
5) Click on the "Program Device" button
6) Follow the programming wizard until it finishes.
7) Connect the Titan One on console, launch the game and press the button on the device until the display shows the same number you programmed the script.
That's all. hope it helps.
1) Copy and paste the code into a blank document in Gtuner's Compiler panel.
2) Save the script.
3) Go to the the Programmer Panel
4) Drag-and-drop the script name to any memory slot.
5) Click on the "Program Device" button
6) Follow the programming wizard until it finishes.
7) Connect the Titan One on console, launch the game and press the button on the device until the display shows the same number you programmed the script.
That's all. hope it helps.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: need lagacy sticks
prototype wrote:J2Kbr wrote:
- Code: Select all
main {
swap(9, 11);
}
Use this code and it will swap button 9 (PS4_RX) and 11 (PS4_LX) to work as legacy control.
this is for xbox one controller not ps4
-
xAUSTIN316x - Sergeant
- Posts: 6
- Joined: Sat Nov 19, 2016 3:48 am
Re: need lagacy sticks
J2Kbr wrote:The basic steps to load a GPC script into Titan One are:
1) Copy and paste the code into a blank document in Gtuner's Compiler panel.
2) Save the script.
3) Go to the the Programmer Panel
4) Drag-and-drop the script name to any memory slot.
5) Click on the "Program Device" button
6) Follow the programming wizard until it finishes.
7) Connect the Titan One on console, launch the game and press the button on the device until the display shows the same number you programmed the script.
That's all. hope it helps.
lol this still tells me nothing where do i go to do the swaps cause your Tutorials Section is way to complicated
-
xAUSTIN316x - Sergeant
- Posts: 6
- Joined: Sat Nov 19, 2016 3:48 am
Re: need lagacy sticks
xAUSTIN316x wrote:prototype wrote:J2Kbr wrote:
- Code: Select all
main {
swap(9, 11);
}
Use this code and it will swap button 9 (PS4_RX) and 11 (PS4_LX) to work as legacy control.
this is for xbox one controller not ps4
This is for both anyway!
- bonefisher
- Lieutenant General
- Posts: 5413
- Joined: Thu Jan 29, 2015 10:49 am
Re: need lagacy sticks
xAUSTIN316x wrote:J2Kbr wrote:The basic steps to load a GPC script into Titan One are:
1) Copy and paste the code into a blank document in Gtuner's Compiler panel.
2) Save the script.
3) Go to the the Programmer Panel
4) Drag-and-drop the script name to any memory slot.
5) Click on the "Program Device" button
6) Follow the programming wizard until it finishes.
7) Connect the Titan One on console, launch the game and press the button on the device until the display shows the same number you programmed the script.
That's all. hope it helps.
lol this still tells me nothing where do i go to do the swaps cause your Tutorials Section is way to complicated
This tells you exactly what to do. Copy and paste the code above to a new GPC script and make sure you delete everything before pasteing code then save. Then 3 thru 6 follow!
- bonefisher
- Lieutenant General
- Posts: 5413
- Joined: Thu Jan 29, 2015 10:49 am
Re: need lagacy sticks
bonefisher wrote:xAUSTIN316x wrote:J2Kbr wrote:The basic steps to load a GPC script into Titan One are:
1) Copy and paste the code into a blank document in Gtuner's Compiler panel.
2) Save the script.
3) Go to the the Programmer Panel
4) Drag-and-drop the script name to any memory slot.
5) Click on the "Program Device" button
6) Follow the programming wizard until it finishes.
7) Connect the Titan One on console, launch the game and press the button on the device until the display shows the same number you programmed the script.
That's all. hope it helps.
lol this still tells me nothing where do i go to do the swaps cause your Tutorials Section is way to complicated
This tells you exactly what to do. Copy and paste the code above to a new GPC script and make sure you delete everything before pasteing code then save. Then 3 thru 6 follow!
thanks i got it. it works but for some reson when i turn left or rite my character stops walking. it wont let me turn and walk at the same time but it is the legacy settings finally
-
xAUSTIN316x - Sergeant
- Posts: 6
- Joined: Sat Nov 19, 2016 3:48 am
17 posts
• Page 1 of 2 • 1, 2
Return to Gtuner Plugins Support
Who is online
Users browsing this forum: No registered users and 5 guests