titan one issue
10 posts
• Page 1 of 1
titan one issue
my titan stopped recognizing my controller and xbox the leds are just going up and down
-
Zier - Corporal
- Posts: 4
- Joined: Tue Jan 12, 2021 9:11 pm
Re: titan one issue
Welcome.
Unplug the device and try a hard reset of the console by holding down the power button on the xbox for 10~ seconds or unplugging the power cord.
If it still happens try a different USB port on the console, the back one is preferred.
Zier wrote:my titan stopped recognizing my controller and xbox the leds are just going up and down
Unplug the device and try a hard reset of the console by holding down the power button on the xbox for 10~ seconds or unplugging the power cord.
If it still happens try a different USB port on the console, the back one is preferred.
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: titan one issue
Hello I have the same problem on PS4 since 2.71 firmware update
Also bluetooth dont work
Also bluetooth dont work
-
Capocha - Sergeant
- Posts: 6
- Joined: Tue Feb 09, 2021 11:10 pm
Re: titan one issue
Capocha wrote:Hello I have the same problem on PS4 since 2.71 firmware update
Also bluetooth dont work
After connect the Titan One to the PS4 console, and a PS4 controller wired on the Titan One, please let me know if the top and bottom dots on the device’s display turns off or stays on. If the dot(s) stay on, please let me know which one. Thanks.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: titan one issue
[i][/i Thanks J2Kbr
]Ps4 controller wired on Titan One = Only left top dot blink.
Titan One with BT dongle....disconnect program an stay A.U. A.U
]Ps4 controller wired on Titan One = Only left top dot blink.
Titan One with BT dongle....disconnect program an stay A.U. A.U
-
Capocha - Sergeant
- Posts: 6
- Joined: Tue Feb 09, 2021 11:10 pm
Re: titan one issue
This is the pic
Thank you
Thank you
- Attachments
-
- IMG-20210211-WA0028.jpg (14.17 KiB) Viewed 1695 times
-
Capocha - Sergeant
- Posts: 6
- Joined: Tue Feb 09, 2021 11:10 pm
Re: titan one issue
On Gtuner Pro - Tools - device monitor - its set PS5 (output), I change to PS4 and always back to PS5
-
Capocha - Sergeant
- Posts: 6
- Joined: Tue Feb 09, 2021 11:10 pm
Re: titan one issue
Thank you.
Let’s first try reflash the Titan One firmware, to be sure it is okay and not corrupted.
Please re-flash the firmware using the recovery mode, as explained here:
http://www.consoletuner.com/kbase/firmw ... y_mode.htm
It may be necessary double press the reset button to enter in the programing mode (P).
--
After that, connect the device to your computer via PCPROG port and open Gtuner Pro.
- Go to top menu Tools -> Options...
- On Device tab:
1. Set the output protocol to PS4.
2. Disable all speed up settings.
Close the Options window and test again with the PS4 console.
thanks.
Let’s first try reflash the Titan One firmware, to be sure it is okay and not corrupted.
Please re-flash the firmware using the recovery mode, as explained here:
http://www.consoletuner.com/kbase/firmw ... y_mode.htm
It may be necessary double press the reset button to enter in the programing mode (P).
--
After that, connect the device to your computer via PCPROG port and open Gtuner Pro.
- Go to top menu Tools -> Options...
- On Device tab:
1. Set the output protocol to PS4.
2. Disable all speed up settings.
Close the Options window and test again with the PS4 console.
thanks.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: titan one issue
Thanks J2KBr
I followed the steps, improved the wired connection, but bluetooth continues to disconnect AU AU
I followed the steps, improved the wired connection, but bluetooth continues to disconnect AU AU
-
Capocha - Sergeant
- Posts: 6
- Joined: Tue Feb 09, 2021 11:10 pm
Re: titan one issue
I believe this is an issue with the latest firmware (2.71), I was previously using a very old firmware and had no issues whatsoever with Bluetooth, now that I updated the T1 constantly shows AU and after a couple minutes it just freezes, the only way to fix it is to physically disconnect the T1 and reconnect it. It's times like this that I wish there was a downgrade option, but I guess for now we just have to wait until @J2Kbr can look into it.
-
PaulaTheKoala - Command Sergeant Major
- Posts: 131
- Joined: Wed Aug 26, 2015 3:45 am
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: vonnystaxx and 153 guests