is it broke

[alaann]

my t1 firmware is getting errors i pressed the button on the back it flashes p it flashs the drive then gets an error on update

[alaann]

it also says error 6

[HardcoreGamer]

Hello alan welcome,

Are you plugging in the micro usb cable on the T1 to your PC/laptop ?

http://www.consoletuner.com/kbase/pc_pr ... ==&ms=AQAY

Are you using a VM by any chance ?

Have you tried re-installing gtuner ? if you haven't then try that but remove all folders related to gtuner before you re-install gtuner, and then do a firmware recovery

http://www.consoletuner.com/kbase/firmw ... ==&ms=AQAI

If the above doesn't work try a different pc/laptop, and if that doesn't work then It can probably be a bad usb cable.

[J2Kbr]

Error 6 is very unusual.
If it does not get fixed after following HardcoreGamer's suggestions, please PM me your device's Serial Number for further checking.

[alaann]

Error 6 is very unusual.
If it does not get fixed after following HardcoreGamer's suggestions, please PM me your device's Serial Number for further checking.

i cant get the serial number it says device disconected

[alaann]

it has p flashing on the front from trying to press the button on the back to reboot and update the firmware,but that cant be compeated because of error 6

[alaann]

i used a different usb and there is now a .o. the dots are in top left bottom right what do i do now

[HardcoreGamer]

i used a different usb and there is now a .o. the dots are in top left bottom right what do i do now

Now that you have the 2 dots and with a o can you do a firmware recovery ?

[alaann]

yep i got it the latest firmware,how do i get my ps3 controller to work with the 360

[HardcoreGamer]

Here's a helpful link that will help you out.

http://www.consoletuner.com/kbase/conne ... _print.htm