PS4 (Destiny) what do i need?

[XROBBZ]

im thinking of geting this for Destiny, didnt try the beta but found some controler layouts for the game on ps4, dosent seem to use any swipe on the toutchpad, only single klick for the ghost, that would not be a problem to program right?
so at this stage it would be fully working with that game?
is it possible to use the swipe comands from the DS4, when its connected to the titan? or is all controls dissabled on the hand control while kb/m is active?
what do i need to set it up, is the Titan one enough, i only got one wierless DS4 controler, do i need some extra usb/bluetooth dongle?

[HardcoreGamer]

im thinking of geting this for Destiny, didnt try the beta but found some controler layouts for the game on ps4, dosent seem to use any swipe on the toutchpad, only single klick for the ghost, that would not be a problem to program right?
so at this stage it would be fully working with that game?

You can always use a script, it shouldn't be a problem.

is it possible to use the swipe comands from the DS4, when its connected to the titan? or is all controls dissabled on the hand control while kb/m is active?

You can still use your controller while your using KB/mouse.

what do i need to set it up, is the Titan one enough, i only got one wierless DS4 controler, do i need some extra usb/bluetooth dongle?

You need the micro USB cable to authenticate your ds4 and if you want wireless you can get a Bluetooth dongle.

Here's a link that tells you what kind of Bluetooth dongle you should get.

http://www.consoletuner.com/kbase/duals ... ==&ms=AQAI

Maybe a longer micro USB cable, depends where you have your PC/laptop.

[XROBBZ]

ok great so i need a micro usb from titan to ds4, (original cable will work yes? that came with the controler)
then its a usb-usb from the computer to titan?

[HardcoreGamer]

ok great so i need a micro usb from titan to ds4, (original cable will work yes? that came with the controler)
then its a usb-usb from the computer to titan?

So let's say you want to use your KB/Mouse, your set up should look something like this.

T1 into PS4;
DS4 Plugged into T1;
PC Plugged into T1 via the Pc Prog port;
KB/Mouse into PC/Laptop.

Yes the original micro USB cable that comes with the controller should work to authenticate.

[XROBBZ]

sorry for noobish question, pc prog port? is that like a COM port, or usb?

[J2Kbr]

it is mini-USB port, on the side of Titan One device.

[XROBBZ]

it is mini-USB port, on the side of Titan One device.

ok thanks
any news on the progress to solove the swipe/bluetooth on the DS4. or is it impossible with this hardware that the titan uses?

[J2Kbr]

This week will be dedicated to this task!! ;)