Gamepack help

Titan One general support. Questions, firmware update, feature request.

Gamepack help

Postby TheAppleGuy » Sat Jan 09, 2016 4:35 am

Hi, I am using the Destiny Gamepack right now.. What is the use of rapid fire when you can just hold r2? Also, I deactivated all mods, but one mod, how do I know it is activated like the anti-recoil one. Do I still have to toggle to the class even if I activate one. Ex. the Anti-recoil is class 5
User avatar
TheAppleGuy
Sergeant
Sergeant
 
Posts: 7
Joined: Sun Jan 03, 2016 3:02 am

Re: Gamepack help

Postby J2Kbr » Sat Jan 09, 2016 10:40 am

TheAppleGuy wrote:Hi, I am using the Destiny Gamepack right now.. What is the use of rapid fire when you can just hold r2?

The rapidfire can turn a semi automatic weapon into a fully automatic. For fully automatic the rapidfire can be used to control the fire rate and, consequentially, reduce the recoil effect. The advantage really depends of the weapon in use.

TheAppleGuy wrote:Also, I deactivated all mods, but one mod, how do I know it is activated like the anti-recoil one. Do I still have to toggle to the class even if I activate one. Ex. the Anti-recoil is class 5

You can use the Gamepack "menu system" to configure/check the gamepack settings using the controller. It flashes the LED on the controller and by counting the amount of flashes you can navigate between the MODs Classes and MODs settings. This process is not user intuitive, for Gamepack configuration I strongly suggest to use the Gtuner's Gamepack configuration interface: Connect the device in your PC with the provided mini-USB cable, then open Gtuner PRO, click on the Programmer TAB (bottom tabs) and drag-and-drop the Gamepack into any memory slot and follow the step-by-step below:

1) click on the memory slot number.
2) A window with the gamepack configuration will open.
3) Enable the MODs you want.
4) Yet on this window, select the option: "Include configuration on programming device", as illustrated here:

http://www.consoletuner.com/kbase/gamep ... ration.htm

5) Close the configuration window.
6) IMPORTANT: Commit the changes on the device by clicking on the button "Program Device".

7) Plug the device on the console.
8) Press the device button until the display shows the same memory slot number you programmed the Gamepack.

9) You should be ready to go!
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Gamepack help

Postby TheAppleGuy » Sat Jan 09, 2016 7:32 pm

ok thank you
User avatar
TheAppleGuy
Sergeant
Sergeant
 
Posts: 7
Joined: Sun Jan 03, 2016 3:02 am


Return to Titan One Device

Who is online

Users browsing this forum: No registered users and 112 guests