Halo 5 Gamerpack problems or user error?

[dutchkorean]

So I just got my Titan One today, so I realize I'm probably not doing something right, but I'm having trouble finding out what's wrong.

I tried turning the console on first (Xbox 1, after a complete shut down), then plugging in the Titan One (after it was fully loaded), then plugging in my controller (without having it on until plugging it in).

I've programmed Halo 5 into Slot 1, loaded the slot, and tried pressing "View + A", then tried playing with no response. Press it again and try playing and still no mods on.

When I have the device connected to my computer as well the Device Monitor shows that when I press "View + A", LED 4 turns on. But as soon as I let go of View, the LED switches back to LED 1. When I hold "View + Start" It shows LED 3 & 4 flashing once each alternately.

The only thing displaying on the Titan One is the number 1.

Sometimes, the Device Monitor shows that when I press "View + Start", only LED 4 flashes, even if I press "View + A" and try again.

Please help me out, I'd really like to stop obsessing over this

**UPDATE: CoD:Advanced Warfare is working, Halo 5 still isn't....

[J2Kbr]

Instead of use the Gamepack "menu system" to configure the gamepack settings using the controller, I strongly suggest to use the Gtuner's Gamepack configuration interface: Connect the device in your PC with the provided mini-USB cable, then open Gtuner PRO, click on the Programmer TAB (bottom tabs) and drag-and-drop the Gamepack into any memory slot and follow the step-by-step below:

1) click on the memory slot number.
2) A window with the gamepack configuration will open.
3) Enable the MODs you want.
4) Yet on this window, select the option: "Include configuration on programming device", as illustrated here:

http://www.consoletuner.com/kbase/gamep ... ration.htm

5) Close the configuration window.
6) IMPORTANT: Commit the changes on the device by clicking on the button "Program Device".

7) Plug the device on the console.
8) Press the device button until the display shows the same memory slot number you programmed the Gamepack.

9) You should be ready to go!