PS4 BO3 Scrolling
2 posts
• Page 1 of 1
PS4 BO3 Scrolling
I just got my Tiatan One today and added the BO3 GamePack. I set it up for Rapidfire w ADS enabled. I have my button layout and joystick layout on default, so I put default into the gamepack. But when I try to play BO3, I keep uncrontrollably scrolling up the menu, classes, etc. And the Rapidfire isnt working when I ADS or otherwise. Need help ASAP
-
Jeremykrueger81 - Private
- Posts: 1
- Joined: Sat Mar 05, 2016 1:49 am
Re: PS4 BO3 Scrolling
It seems there is some misconfiguration of the Gamepack, or the button layout is not matching. Is not clear how you are doing the configuration. As you can use the Gamepack "menu system" to configure the gamepack settings using the controller (it flashes the LED on the controller and by counting the amount of flashes you can navigate between the MODs Classes and MODs settings) this process is not user intuitive, for Gamepack configuration I strongly suggest to use the Gtuner's Gamepack configuration interface: Connect the device in your PC with the provided mini-USB cable, then open Gtuner PRO, click on the Programmer TAB (bottom tabs) and drag-and-drop the Gamepack into any memory slot and follow the step-by-step below:
1) click on the memory slot number.
2) A window with the gamepack configuration will open.
3) Enable the MODs you want.
4) Yet on this window, select the option: "Include configuration on programming device", as illustrated here:
http://www.consoletuner.com/kbase/gamep ... ration.htm
5) Close the configuration window.
6) IMPORTANT: Commit the changes on the device by clicking on the button "Program Device".
7) Plug the device on the console.
8) Press the device button until the display shows the same memory slot number you programmed the Gamepack.
9) You should be ready to go!
1) click on the memory slot number.
2) A window with the gamepack configuration will open.
3) Enable the MODs you want.
4) Yet on this window, select the option: "Include configuration on programming device", as illustrated here:
http://www.consoletuner.com/kbase/gamep ... ration.htm
5) Close the configuration window.
6) IMPORTANT: Commit the changes on the device by clicking on the button "Program Device".
7) Plug the device on the console.
8) Press the device button until the display shows the same memory slot number you programmed the Gamepack.
9) You should be ready to go!
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 77 guests