Gtuner IV and Titan Two 1.08 BETA Release

Official news and announcements from the ConsoleTuner team.

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby DontAtMe » Tue Oct 20, 2020 4:57 am

Code: Select all
* Multi Interface HID: Output resolution of sticks increased from 8-bit to 16-bit {GitHub#274}

The stick resolution for HID Output, are showing up as 11-bits for me.
Image
-1025 to 1024.
User avatar
DontAtMe
Captain
Captain
 
Posts: 502
Joined: Tue Oct 02, 2018 4:49 am

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby J2Kbr » Tue Oct 20, 2020 8:38 am

These results are correct. The value range is now from -1024 to +1024 (which effectively allows the use of first decimal place in GPC scripts). However, to accommodate this new value range, the corresponding HID field size has been increased from 8-bit to 16-bit. The changelog was updated to avoid confusion.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby Michael » Mon Oct 26, 2020 2:44 pm

should be gbc.png
should be gbc.png (25.96 KiB) Viewed 6414 times


There should be "GBC Bytecode".
Last edited by Michael on Tue Oct 27, 2020 10:49 am, edited 1 time in total.
User avatar
Michael
Master Sergeant
Master Sergeant
 
Posts: 37
Joined: Mon Feb 26, 2018 5:29 am

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby J2Kbr » Tue Oct 27, 2020 10:33 am

Thank you Michael. However, "GPC Bytecode" is correct, means what is being published is the bytecode generated from the GPC script, hence GPC bytecode.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby Michael » Tue Oct 27, 2020 10:47 am

Thank you Michael. However, "GPC Bytecode" is correct, means what is being published is the bytecode generated from the GPC script, hence GPC bytecode.

I get it now. Please forgive my ignorance and thank you for your patience and time to explain this.

By the way, please drop the "Gtuner_cn_(Simplified Chinese)_v1.05.ts", because I changed the "GPC Bytecode" to "GBC Bytecode" in this one, and it's wrong.
User avatar
Michael
Master Sergeant
Master Sergeant
 
Posts: 37
Joined: Mon Feb 26, 2018 5:29 am

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby J2Kbr » Tue Oct 27, 2020 11:10 am

Michael wrote:By the way, please drop the "Gtuner_cn_(Simplified Chinese)_v1.05.ts", because I changed the "GPC Bytecode" to "GBC Bytecode" in this one, and it's wrong.

:smile0517:
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby Lollie » Mon Nov 23, 2020 12:04 pm

I only just found out about the Virtual Controller feature, pleasantly surprised! Up to this point, to display controller input for consoles, I've been using KMG Capture to pass a PC-connected controller to console. This removes the need for this workaround. :innocent_smile_1:

As far as the Virtual Controller goes, is it possible to pass PS4 touchpad input through to PC as well?
User avatar
Lollie
Sergeant First Class
Sergeant First Class
 
Posts: 18
Joined: Tue Jan 23, 2018 1:28 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby J2Kbr » Mon Nov 23, 2020 2:28 pm

Lollie wrote:I only just found out about the Virtual Controller feature, pleasantly surprised! Up to this point, to display controller input for consoles, I've been using KMG Capture to pass a PC-connected controller to console. This removes the need for this workaround. :innocent_smile_1:

Awesome!! :joia: :joia:
Lollie wrote:As far as the Virtual Controller goes, is it possible to pass PS4 touchpad input through to PC as well?

Yes, just select "Dualshock 4" on the Virtual controller drop-down box. Please note the software you are using for controller overlay needs to support the Ds4 touchpad inputs.
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby Lollie » Mon Nov 23, 2020 6:21 pm

J2Kbr wrote:Yes, just select "Dualshock 4" on the Virtual controller drop-down box. Please note the software you are using for controller overlay needs to support the Ds4 touchpad inputs.

Weird, I guess I'll have to look further into this. I have a custom display built in Unity (via Rewired) that has no trouble showing touchpad inputs when the DS4 is connected directly to the PC, but they don't show up via Virtual Controller - though they're definitely being read by GTuner IV.



Fwiw, all other inputs display fine! I can live without this, I just figured it was worth mentioning in case something was up.
User avatar
Lollie
Sergeant First Class
Sergeant First Class
 
Posts: 18
Joined: Tue Jan 23, 2018 1:28 pm

Re: Gtuner IV and Titan Two 1.08 BETA Release

Postby J2Kbr » Mon Nov 23, 2020 9:50 pm

You are absolutely right, the official ViGEm drivers does not support the DS4 touchpad (I assumed it did, sorry for that):

https://www.reddit.com/r/gpdwin/comment ... ps_button/
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 20323
Joined: Tue Mar 18, 2014 1:39 pm

Previous

Return to News and Announcements

Who is online

Users browsing this forum: No registered users and 89 guests