COD Black Ops 3 (BO3) version 2.1a
Re: COD Black Ops 3 (BO3) version 1.6
boat_58 wrote:I just tested it but its yielding the same results as before. You are correct on what i want it to do btw. I see you commented out the sprint part out of the drop shot code. Its still doing the same thing. it just drops to the ground instead of sliding. I am not sure if this will help but to do it regularly, you have to sprint then hold on to the crouch button. If you sprint and push the crouch button, it won't slide it will just crouch. But if you are sprinting and you press and hold the crouch button, it will slide. I just figured that out just now. I am not sure why in private match though it does it perfect but in public matches it doesn't slide.
I commented out other sections of the code too where pressing the fire button would stop the auto sprint combo. I don't know if these sections were needed, but I want to try to take everything that could interfere.
That is a very astute observation that may be part of what is causing the issue. The drop shot combo works by pressing crouch and then repressing it. First is crouch and the second is need to lay down. The first crouch only waits 15 mS before initiating the 2nd crouch. That timing (i.e. short vs long hold of the crouch) may be issue.
If you have time, here are some tests that you can run. Below is the drop shot combo. Try increase the wait(15) time after the first crouch to see if it ever gets the slide working.
- Code: Select all
combo DropShot {
// set_val(SPRINT_EXO,0);
// wait(15)
set_val(CROUCH, 100);
wait(15) // try different values here
set_val(CROUCH, 100);
wait(DROP_SHOT_WAIT);
}
Here is how I make test things to make them faster. I load several versions of the same script into different memory slots and then cycle through the memory slots for testing. Below is an example.
Slot 1 - default script as I provided above
Slot 2 - same script but only change the wait time in the combo from 15 to 50 as described above
Slot 3 - wait time is 100
Slot 4 - wait time is 150
Slot 5 - wait time is 200
Slot 6 - wait time is 250
Let's assume that I find that it works best between 50 to 100 mS. I then delete slot 3 to 5 and go with smaller increments.
Slot 2 - keep the same for reference
Slot 3 - wait time is 60
Slot 4 - wait time is 70
Slot 5 - wait time is 80
Slot 6 - wait time is 90
Slot 7 - wait time is 100
This will help to test quickly without having to go in and out of games.
If you don't get a chance to test, I will try it later tonight.
-
UK_Wildcats - Brigadier General
- Posts: 2243
- Joined: Thu Jan 08, 2015 6:53 pm
Re: COD Black Ops 3 (BO3) version 1.7
I did some testing but I am getting inconsistent results. The ability to slide varies depending on the weapon. Certain weapons will slide while others will not. It should work in public matches depending on the weapon, class, perks, attachments, etc. Please do some testing and see how this works for you with your various setups.
- Code: Select all
/*
GPC Online Library
COD Black Ops 3(BO3) Script
=============================================================================
Device: Titan One
Author: Terry (aka UK_Wildcats_Fans)
Game: Call of Duty Black Ops 3 (BO3)
System: PlayStation 4 (PS4) or PlayStation 3 (PS3)
Controller: DualShock 4 (DS4) or DualShock 3 (DS3)
NOTE: This script should work for Xbox (360 or One) with changes described further below
Game Settings: Tactical Flipped Button Layout
NOTE: This script should work with other button layouts with changes described further below
Device: Titan 1 (firmware version 2.27 or newer)
Website: http://www.consoletuner.com
Forum Post: http://www.consoletuner.com/forum/viewtopic.php?f=6&t=2015
=============================================================================
COPYRIGHT:
2015 Terry (UK_Wildcats_Fans) from http://www.consoletuner.com. This Script was made and intended for http://www.Consoletuner.com & Titan 0ne ONLY,
UNLESS written premission is given by the creator and/or copywritee.
All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission
of the copyright holder. For permission, contact UK_Wildcats_Fans via the http://www.consoletuner.com/forum website
=============================================================================
CHANGELOG:
Version 1.0: Initial script from my COD AW v2.5 script used as basis. Took out items that would not be applicable (i.e. double jump, auto dash, etc.)
Version 1.1: Updated based upon testing during BO3 beta
Version 1.2: Tweaked rapid fire settings
Version 1.3: Added rumble notifier and light bar color changes when activating certain mods
Version 1.4: Clean up and simplify the script.
Version 1.5: Took out section for stopping sprint reload since you can reload while sprinting in BO3
Version 1.6: Added ADS Fire. If you press the fire button it automatically makes it ADS (aim down sights). LookInversionON is set to FALSE by default
Version 1.7: Added auto hold breath for the snipers out there
=============================================================================
TOGGLES: (You MUST press the ADS or CROUCH button first before)
Press ADS (aim down sights) button in addition with any of the below. Using ADS button helps to prevent accidental turn ON and OFF when operating killstreaks and/or other times that requires the D PAD
Press LEFT on the D PAD to activate/deactivate "RAPID FIRE ON/OFF"
Press RIGHT on the D PAD to activate/deactivate "RAPID FIRE CYCLING"
Press UP on the D PAD to activate/deactivate "TBD"
Press DOWN on the D PAD to activate/deactivate "DROP SHOT"
Press CROUCH in addition with any of the below. Using CROUCH helps to prevent accidental turn ON and OFF when operating killstreaks and/or other times that requires the D PAD
Press LEFT on the D PAD to activate/deactivate "HOLD BREATH"
Press RIGHT on the D PAD to activate/deactivate "ADS Fire"
Press UP on the D PAD to activate/deactivate "QUICK SCOPE"
Press DOWN on the D PAD to activate/deactivate "ANTI-RECOIL"
=============================================================================
GAMEPLAY COMMENTS
The timing and functionality with BO3 has not been tested yet.
Rapid Fire:
I am doing something different with rapid fire. Normally, I had been using a rate of fire variable
which was used to make the Hold and Rest Times needed for the rapid fire combo. I am not using direct hold and rest times.
I now have two toggles for rapid fire: (see the TOGGLES section above)
1) toggles rapid fire mod on/off and 2) cycles between different rapid fire values for hold and rest time.
This will help with testing and allow players to have different rapid fire values for different weapons
Quick Melee & Quick Reload:
Treyarch took out sprint reload cancel, so quick melee will not work. They also modified their code so we cannot do quick reload.
Drop Shot:
The Drop Shot combo is only started once the shoot button is initially pressed. It will not run again until it is released and re-pressed again.
If DISABLE_WITH_SCOPE is TRUE, Drop Shot occurs upon button press of SHOOT button without ADS. If you press ADS button after starting drop,
it will stop the drop shot combo. You must then release and re-press the SHOOT button to activate drop shot again. This interferes if you use
the mini gun specialist perk, so you can toggle it on/off while in the game.
Auto Sprint & Reloading:
Reload times vary with weapons and auto sprint can cause problems. You sometimes have to let off the joystick, hold the RELOAD button or hold ADS to reload fully
If it does not start sprinting right away, you can press the SPRINT button to start it.
You can adjust the reload wait time that best suits your weapons and reloads.
Anti-Recoil:
There is no one right value. See this thread for more information. http://www.consoletuner.com/forum/viewtopic.php?f=17&t=1155
If you are USING look inversion you need to change InversionON to TRUE.
Quick Scoping:
There are variables to play around with to meet your specific needs.
I am absolutely terrible at quick scoping, so I don't really use this and haven't tested it that much.
=============================================================================
IN GAME BUTTON LAYOUTS:
This script was based upon the TACTICAL FLIPPED button configuration. If you do not play in this configuration, below are changes needed to
play in other button layouts.
USING THIS SCRIPT ON VARIOUS CONSOLES: This script will work with various consoles.
The Titan 1 maps the various controller variables (i.e PS4_R1, PS3_R1, XB1_RB, XB360_RB) to an index number.
See the below link for the data representation table. Therefore, PS4_R1 will work as XB1_RB OR XB360_RB without any changes to the script.
I am not using the menu, view, PS, select, etc. buttons, so they should not be an issue.
Data Representation Index
http://www.consoletuner.com/kbase/data_representation.htm?mw=MjQw&st=MA==&sct=MA==&ms=AAAA
NOTE: The XB360 and XB1 do not have the TACTICAL FLIPPED in game settings; therefore, you have to make changes in the script
to change from TACTICAL FLIPPED to DEFAULT or TACTICAL. See the below.
Option 1: You play in the normal TACTICAL button layout. Make these changes to the define section per the below
define ADS = PS4_L2; // R1 & L1 can be changed to R2 AND L2
define EXO = PS4_L1; // R1 & L1 can be changed to R2 AND L2
define SHOOT = PS4_R2; // R1 & L1 can be changed to R2 AND L2
define GRENADE = PS4_R1; // R1 & L1 can be changed to R2 AND L2
Option 2: You play in the normal DEFAULT button layout. Make these changes to the define section per the below
define ADS = PS4_L2; // R1 & L1 can be changed to R2 and L2
define EXO = PS4_L1; // R1 & L1 can be changed to R2 and L2
define SHOOT = PS4_R2; // R1 & L1 can be changed to R2 AND L2
define GRENADE = PS4_R1; // R1 & L1 can be changed to R2 AND L2
define CROUCH = PS4_CIRCLE; // "Default" button layout is PS4_CIRCLE. "Tactical" button layout is PS4_R3
define MELEE = PS4_R3; // "Default" button layout is PS4_R3. "Tactical button layout is PS4_CIRCLE
Option 3: You play in the normal DEFAULT FLIPPED layout. Make these changes to the define section per the below
define CROUCH = PS4_CIRCLE; // "Default" button layout is PS4_CIRCLE. "Tactical" button layout is PS4_R3
define MELEE = PS4_R3; // "Default" button layout is PS4_R3. "Tactical button layout is PS4_CIRCLE
=============================================================================
LED DEFINITIONS FOR PS4 LIGHT BAR
LED(0,0,0,0); // Off
LED(1,0,0,0); // Blue (default)
LED(0,1,0,0); // Red
LED(0,0,1,0); // Green
LED(0,0,0,1); // Pink
LED(1,0,1,0); // Cyan
LED(0,1,1,0); // Amber (aka yellow)
LED(1,1,1,1); // White
=============================================================================
DEFINES
*/
define ADS = PS4_L1; // R1 & L1 can be changed to R2 and L2
define EXO = PS4_L2; // R1 & L1 can be changed to R2 and L2
define SPRINT_EXO = PS4_L3;
define LX = PS4_LX;
define LY = PS4_LY;
define SHOOT = PS4_R1; // R1 & L1 can be changed to R2 AND L2
define GRENADE = PS4_R2; // R1 & L1 can be changed to R2 AND L2
define CROUCH = PS4_R3; // "Default" button layout is PS4_CIRCLE. "Tactical" button layout is PS4_R3.
define RX = PS4_RX;
define RY = PS4_RY;
define JUMP = PS4_CROSS;
define RELOAD = PS4_SQUARE;
define MELEE = PS4_CIRCLE; // "Default" button layout is PS4_R3. "Tactical button layout is PS4_CIRCLE.
define SWAP_WEAPONS = PS4_TRIANGLE;
define UP = PS4_UP;
define DOWN = PS4_DOWN;
define LEFT = PS4_LEFT;
define RIGHT = PS4_RIGHT;
define INSTA_FIRE = 95; // The % at which it boosts the SHOOT button when pressed - i.e. 95% means when pressed 5%
define INSTA_AIM = 95; // The % at which it boosts the ADS button when pressed - i.e. 95% means when pressed 5%
define INSTA_OTHER = 95; // The % at which it boosts the other button when pressed - i.e. 95% means when pressed 5%
define DROPSHOT_QUICKNESS = 95; // The % at which it boosts the CROUCH button when pressed - i.e. 95% means when pressed 5%
define ADS_SPEED = 20; // The % at which it boosts your aiming speed when using ADS
define DISABLE_WITH_SCOPE = TRUE; // Will not drop shot if ADS is on
define ANTI_RECOIL = 20; // Change this value to compensate to the vertical recoil ASM1 with rapidfire = 40, BAL no grip = 20; Bal with grp = 0;
define ANTI_RECOIL_LEFT = 0; // Change this value to compensate to the left
define ANTI_RECOIL_RIGHT = 0; // Change this value to compensate to the right
define ONLY_WITH_SCOPE = TRUE; // Anti-recoil will only be applied with ADS
define QUICK_SCOPE_WAIT = 500; // Increase this time for a longer ADS time. Decrease this time for a shorter ADS time
define RELOAD_WAIT = 2000; // Wait time after stopping auto sprint to allow reloading. Adjust as necessary
define SHOOT_WAIT = 300; // Wait time after stopping auto sprint to allow shooting
define DROP_SHOT_WAIT = 1000; // Wait time for drop shot combo (changed from 1200 to 1000)
// VARIABLES =============================================================================
int AkimboSingleON = FALSE; // Akimbo mode for regular single shot mode
int AkimboRapidON = FALSE; // Akimbo mode with rapid fire mode
int ThrustJumpON = FALSE;
int AutoSprintON = TRUE;
int AutoDashON = FALSE;
int QuickMelee_ON = FALSE;
int RapidFireON = FALSE;
int DropShotON = TRUE; // Always turned on now
int InversionON = FALSE; // Set this to TRUE if you are using look inversion enabled in the game setting. Most people are NOT using look inversion
int JitterON = FALSE;
int AntiRecoilON = FALSE;
int QuickScopeON = FALSE;
int QuickReloadON = FALSE;
int RapidFireCounter = 1;
int anti_recoil;
int anti_recoil_left;
int anti_recoil_right;
int ADS_Fire_On = FALSE;
int HoldBreathON = FALSE;
// Hold Time is the time in mSeconds that the SHOOT button is pressed. It varies depending on the weapon, game and attachments.
// Release time is the time between shooting. This will vary depending on the game timing that is coded into the game.
int HoldTime = 10; // defined in mSeconds for regular Rapid Fire
int RestTime = 10; // defined in mSeconds for regular Rapid Fire
int HoldTime2 = 10; // defined in mSeconds for Akimbo Rapid Fire
int RestTime2 = 10; // defined in mSeconds for Akimbo Rapid Fire
// MAIN SCRIPT =============================================================================
main {
vm_tctrl(-5); // sets main loop to 5mS vs the default 10mS
// Makes the button 100% pressed even if barely pressed - aka more sensitive and quicker reaction
if(get_val(CROUCH)){sensitivity(CROUCH, NOT_USE, 100 + DROPSHOT_QUICKNESS);}
if(get_val(ADS)){sensitivity(ADS, 10, 100 + INSTA_AIM);}
if(get_val(SHOOT)){sensitivity(SHOOT, 10, 100 + INSTA_FIRE);}
if(get_val(SPRINT_EXO)){sensitivity(SPRINT_EXO, 10, 100 + INSTA_OTHER);}
if(get_val(GRENADE)){sensitivity(GRENADE, 10, 100 + INSTA_OTHER);}
if(event_press(LEFT) && get_val(ADS)) { // Turn ON and OFF Rapid Fire
RapidFireON = !RapidFireON;
if(RapidFireON) {
combo_run(GreenLED);
combo_run(RumbleNotifier);
AkimboSingleON = FALSE; // Turn OFF Akimbo modes
AkimboRapidON = FALSE; // Turn OFF Akimbo modes
QuickScopeON = FALSE; // Turn OFF QuickScope
}
if(!RapidFireON) {combo_run(BlueLED);}
}
// Using this to cycle through rapid fire settings for testing. It can be used for having multiple rapid fire settings
// You can set these values to whatever you want and adjust how many different values that you want.
if(event_press(RIGHT) && get_val(ADS) && RapidFireON) {
RapidFireCounter = RapidFireCounter + 1;
combo_run(SingleNotifier);
if(RapidFireCounter > 5) {RapidFireCounter = 1;} // Change the "5" to how many options that you want
if(RapidFireCounter == 1){HoldTime = 10; RestTime = 10;} // Preset #1
if(RapidFireCounter == 2){HoldTime = 15; RestTime = 15;} // Preset #2
if(RapidFireCounter == 3){HoldTime = 20; RestTime = 20;} // Preset #3
if(RapidFireCounter == 4){HoldTime = 25; RestTime = 25;} // Preset #4
if(RapidFireCounter == 5){HoldTime = 30; RestTime = 30;} // Preset #5
}
if(event_press(DOWN) && get_val(ADS)) { // Turns ON and OFF Drop Shot
DropShotON = !DropShotON;
if(DropShotON) {
ADS_Fire_On = FALSE;
combo_run(AmberLED);
combo_run(RumbleNotifier);
}
if(!DropShotON) {combo_run(BlueLED);}
}
if(event_press(UP) && get_val(CROUCH)) { // Turns ON and OFF Quick Scope
QuickScopeON = !QuickScopeON;
if(QuickScopeON) {
AkimboSingleON = FALSE; // Turn OFF Akimbo modes
AkimboRapidON = FALSE; // Turn OFF Akimbo modes
RapidFireON = FALSE; // Turn OFF Rapid Fire
AntiRecoilON = FALSE; // Turn OFF Anti Recoil
}
}
if(event_press(DOWN) && get_val(CROUCH)) { // Turns ON and OFF Anti-Recoil
AntiRecoilON = !AntiRecoilON;
if(AntiRecoilON) {
combo_run(PinkLED);
combo_run(RumbleNotifier);
}
if(!AntiRecoilON) {combo_run(BlueLED);}
}
if(event_press(RIGHT) && get_val(CROUCH)) { // Turns ON and OFF ADS Fire
ADS_Fire_On = !ADS_Fire_On;
if(ADS_Fire_On) {
DropShotON = FALSE;
combo_run(WhiteLED);
combo_run(RumbleNotifier);
}
if(!ADS_Fire_On) {combo_run(BlueLED);}
}
if(event_press(LEFT) && get_val(CROUCH)) { // Turns ON and OFF auto hold breath
HoldBreathON = !HoldBreathON;
if(HoldBreathON) {
combo_run(WhiteLED);
combo_run(RumbleNotifier);
}
if(!HoldBreathON) {combo_run(BlueLED);}
}
if(get_val(SHOOT) && ADS_Fire_On && !DropShotON) {set_val(ADS,100);}
// Drop Shot
if(event_press(SHOOT) && DropShotON){
combo_stop(AutoSprint);
combo_run(DropShot);
}
if(DISABLE_WITH_SCOPE && get_val(ADS)) {combo_stop(DropShot);}
// Rapid Fire without ADS Fire
if(get_val(SHOOT) && RapidFireON && !ADS_Fire_On) {combo_run(RapidFire);}
// else if(combo_running(RapidFire)) {combo_stop(RapidFire);}
// Rapid Fire with ADS Fire
if(get_val(SHOOT) && RapidFireON && ADS_Fire_On) {combo_run(ADSRapidFire);}
// else if(combo_running(RapidFire)) {combo_stop(RapidFire);}
/* Personal Comment: I found that I have better game performance without using this. You can adjust your sensitivity for this.
// Faster movement while aiming with ADS
if(get_val(ADS)){
sensitivity(RX, NOT_USE, 100 + ADS_SPEED);
sensitivity(RY, NOT_USE, 100 + ADS_SPEED);
}
*/
// Anti-recoil
if(!ONLY_WITH_SCOPE || get_val(ADS)) {combo_run(AntiRecoil);}
// Quick Scope -- CANNOT ADS (aka regular scope) while using Quick Scope -- for regular ADS you must toggle off QuickScopeON -- see "Toggles" section at the top of this script
if(QuickScopeON && event_press(ADS) ) {combo_run(QuickScope);}
// Hold Breath
if(HoldBreathON && get_val(ADS)) {combo_run(HoldBreath);}
// AutoSprint -- Try different values (i.e. -90, -95); toggle ON/OFF
if(get_val(LY) < -99 && AutoSprintON && !combo_running(AllowReloading)) { combo_run(AutoSprint); }
else if((get_val(LY) > -99 && AutoSprintON)) {combo_stop(AutoSprint); } // Reload will also stop
// if(event_press(RELOAD)) {combo_stop(AutoSprint); combo_run(AllowReloading);} // Stop auto sprint to allow reloading (not needed for BO3)
if(get_val(SHOOT)) {combo_stop(AutoSprint); combo_run(AllowShooting);} // Stop auto sprint to allow shooting
} // End of MAIN
// COMBOS =============================================================================
combo AllowShooting {
set_val(SPRINT_EXO, 0);
wait(SHOOT_WAIT); // can adjust to ensure enough time for shooting
}
combo AllowReloading {
set_val(SPRINT_EXO, 0);
wait(RELOAD_WAIT); // can adjust to ensure enough time to reload
}
combo RapidFire {
set_val(SHOOT, 100);
wait(HoldTime);
set_val(SHOOT, 0);
wait(RestTime);
set_val(SHOOT, 0);
}
combo ADSRapidFire {
set_val(SHOOT, 100);
set_val(ADS, 100);
wait(HoldTime);
set_val(SHOOT, 0);
wait(RestTime);
set_val(SHOOT, 0);
set_val(ADS, 0);
}
combo DropShot {
set_val(SPRINT_EXO,0);
wait(15);
set_val(CROUCH, 100);
wait(50); // 15 is no slide in public but slide in private. 50 is slide in public but no slide in private
set_val(CROUCH, 100);
wait(DROP_SHOT_WAIT);
}
combo QuickScope {
set_val(ADS, 100);
wait(QUICK_SCOPE_WAIT) //Increase this time for a longer ADS time. Decrease this time for a shorter ADS time.
set_val(ADS, 0);
wait(10);
set_val(SHOOT, 100);
wait(20);
set_val(SHOOT, 0);
wait(60);
set_val(SHOOT, 0);
}
combo HoldBreath {
set_val(SPRINT_EXO, 100);
wait(10);
set_val(SPRINT_EXO, 100);
}
combo AutoSprint {
set_val(SPRINT_EXO, 100);
wait(10);
set_val(SPRINT_EXO, 100)
}
combo AntiRecoil {
// Look Inversion Enabled
if(get_val(SHOOT) && AntiRecoilON && InversionON) { // Using AntiRecoilON toggle for testing and when using multiple weapons
anti_recoil = get_val(RY) - ANTI_RECOIL; // SUBTRACT anti_recoil when LOOK INVERSION is ENABLED
if(anti_recoil > 100) anti_recoil = 100;
set_val(RY, anti_recoil);
anti_recoil_left = get_val(RX) - ANTI_RECOIL_LEFT;
if(anti_recoil_left > 100) anti_recoil_left = 100;
set_val(RX, anti_recoil_left);
anti_recoil_right = get_val(RX) + ANTI_RECOIL_RIGHT;
if(anti_recoil_right > 100) anti_recoil_right = 100;
set_val(RX, anti_recoil_right);
}
// Normal Look Inversion - look inversion disabled
if(get_val(SHOOT) && AntiRecoilON && !InversionON) { // Using AntiRecoilON toggle for testing and when using multiple weapons
anti_recoil = get_val(RY) + ANTI_RECOIL; // ADD anti_recoil for normal
if(anti_recoil > 100) anti_recoil = 100;
set_val(RY, anti_recoil);
anti_recoil_left = get_val(RX) - ANTI_RECOIL_LEFT;
if(anti_recoil_left > 100) anti_recoil_left = 100;
set_val(RX, anti_recoil_left);
anti_recoil_right = get_val(RX) + ANTI_RECOIL_RIGHT;
if(anti_recoil_right > 100) anti_recoil_right = 100;
set_val(RX, anti_recoil_right);
}
}
combo RumbleNotifier {
// double rumble
set_rumble(RUMBLE_A, 100);
wait(250);
set_rumble(RUMBLE_A, 0);
wait(50);
set_rumble(RUMBLE_A, 100);
wait(250);
set_rumble(RUMBLE_A, 0);
wait(20);
}
combo SingleNotifier {
// single rumble
set_rumble(RUMBLE_A, 100);
wait(200);
set_rumble(RUMBLE_A, 0);
wait(20);
}
combo BlueLED {
// blue (default)
set_led(LED_1, 1);
set_led(LED_2, 0);
set_led(LED_3, 0);
set_led(LED_4, 0);
}
combo GreenLED {
// green
set_led(LED_1, 0);
set_led(LED_2, 0);
set_led(LED_3, 1);
set_led(LED_4, 0);
}
combo PinkLED {
// pink
set_led(LED_1, 0);
set_led(LED_2, 0);
set_led(LED_3, 0);
set_led(LED_4, 1);
}
combo AmberLED {
// amber (aka yellow)
set_led(LED_1, 0);
set_led(LED_2, 1);
set_led(LED_3, 1);
set_led(LED_4, 0);
}
combo WhiteLED {
// white
set_led(LED_1, 1);
set_led(LED_2, 1);
set_led(LED_3, 1);
set_led(LED_4, 1);
}
-
UK_Wildcats - Brigadier General
- Posts: 2243
- Joined: Thu Jan 08, 2015 6:53 pm
Re: COD Black Ops 3 (BO3) version 1.7
They did not work. This is what i noticed.
Public Match
-I notice at 250 and up, it would not go prone. It would only do a soft crouch only. The one where it gets on its knees. Since i was running it would get on the knee and get back up quickly. I tested it all the way to 700ms.
-Below 250 it just seem to crouch and then go prone when running. I do not understand why in private matches it doesn't do this and it slides shoots instead.
Private Match
-I notice at 250 and up, it would slide, then get on its knees. The delay is too long that it gets on its knees after its completed the slide.
-Below 250 it performed the slide perfect and get up and start running.
So our range needs to be below 250, but i think its something else thats causing it. Because i don't understand why in private matches, it is able to do the slide, and in public matches, even matches that i am the host, it will not do the slide, instead it will run, then drop to prone.
Public Match
-I notice at 250 and up, it would not go prone. It would only do a soft crouch only. The one where it gets on its knees. Since i was running it would get on the knee and get back up quickly. I tested it all the way to 700ms.
-Below 250 it just seem to crouch and then go prone when running. I do not understand why in private matches it doesn't do this and it slides shoots instead.
Private Match
-I notice at 250 and up, it would slide, then get on its knees. The delay is too long that it gets on its knees after its completed the slide.
-Below 250 it performed the slide perfect and get up and start running.
So our range needs to be below 250, but i think its something else thats causing it. Because i don't understand why in private matches, it is able to do the slide, and in public matches, even matches that i am the host, it will not do the slide, instead it will run, then drop to prone.
-
boat_58 - First Sergeant
- Posts: 63
- Joined: Sat Nov 07, 2015 3:33 pm
Re: COD Black Ops 3 (BO3) version 1.7
UK_Wildcats_Fans wrote:I did some testing but I am getting inconsistent results. The ability to slide varies depending on the weapon. Certain weapons will slide while others will not. It should work in public matches depending on the weapon, class, perks, attachments, etc. Please do some testing and see how this works for you with your various setups.
You got it to slide in public match? what was your setup? I wasn't able to get it to slide in public
-
boat_58 - First Sergeant
- Posts: 63
- Joined: Sat Nov 07, 2015 3:33 pm
Re: COD Black Ops 3 (BO3) version 1.7
It seemed to vary depending on the weapon, attachment and perks. I did my initial testing with the kuda but then tried the vmp but it would not work. I believe that it worked with the Sheiva but not gorgon. I did not do enough testing to figure out with combination actually works. That is why I wasn't going to publish it. I will keep testing and see what happens.
-
UK_Wildcats - Brigadier General
- Posts: 2243
- Joined: Thu Jan 08, 2015 6:53 pm
Re: COD Black Ops 3 (BO3) version 1.7
Made some test yesterday. Rapid fire don't work. Led don't turn green. I use the default setup button. (Activate is : ads +left pad) still only show the score of the game when I do it. ( but drop shot work perfectly )
I will ask you to do 3 script to download if it s possible??
One for default button
One inversed
One for the other possibility
Or might you explain what code need to be changed ? Your description for use default button explain 6 codes but that still enough ?
Thanks for your help !
Best regards
I will ask you to do 3 script to download if it s possible??
One for default button
One inversed
One for the other possibility
Or might you explain what code need to be changed ? Your description for use default button explain 6 codes but that still enough ?
Thanks for your help !
Best regards
-
olex73 - Sergeant First Class
- Posts: 24
- Joined: Wed Oct 07, 2015 12:07 pm
Re: COD Black Ops 3 (BO3) version 1.7
olex73 wrote:Made some test yesterday. Rapid fire don't work. Led don't turn green. I use the default setup button. (Activate is : ads +left pad) still only show the score of the game when I do it. ( but drop shot work perfectly )
I will ask you to do 3 script to download if it s possible??
One for default button
One inversed
One for the other possibility
Or might you explain what code need to be changed ? Your description for use default button explain 6 codes but that still enough ?
Thanks for your help !
Best regards
Here is the script for a DEFAULT. All that was changed was:
Swapped R2/R1 and L2/L1 and R3/CIRCLE
- Code: Select all
/*
GPC Online Library
COD Black Ops 3(BO3) Script
=============================================================================
Device: Titan One
Author: Terry (aka UK_Wildcats_Fans)
Game: Call of Duty Black Ops 3 (BO3)
System: PlayStation 4 (PS4) or PlayStation 3 (PS3)
Controller: DualShock 4 (DS4) or DualShock 3 (DS3)
NOTE: This script should work for Xbox (360 or One) with changes described further below
Game Settings: Tactical Flipped Button Layout
NOTE: This script should work with other button layouts with changes described further below
Device: Titan 1 (firmware version 2.27 or newer)
Website: http://www.consoletuner.com
Forum Post: http://www.consoletuner.com/forum/viewtopic.php?f=6&t=2015
=============================================================================
COPYRIGHT:
2015 Terry (UK_Wildcats_Fans) from http://www.consoletuner.com. This Script was made and intended for http://www.Consoletuner.com & Titan 0ne ONLY,
UNLESS written premission is given by the creator and/or copywritee.
All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission
of the copyright holder. For permission, contact UK_Wildcats_Fans via the http://www.consoletuner.com/forum website
=============================================================================
CHANGELOG:
Version 1.0: Initial script from my COD AW v2.5 script used as basis. Took out items that would not be applicable (i.e. double jump, auto dash, etc.)
Version 1.1: Updated based upon testing during BO3 beta
Version 1.2: Tweaked rapid fire settings
Version 1.3: Added rumble notifier and light bar color changes when activating certain mods
Version 1.4: Clean up and simplify the script.
Version 1.5: Took out section for stopping sprint reload since you can reload while sprinting in BO3
Version 1.6: Added ADS Fire. If you press the fire button it automatically makes it ADS (aim down sights). LookInversionON is set to FALSE by default
Version 1.7: Added auto hold breath for the snipers out there
=============================================================================
TOGGLES: (You MUST press the ADS or CROUCH button first before)
Press ADS (aim down sights) button in addition with any of the below. Using ADS button helps to prevent accidental turn ON and OFF when operating killstreaks and/or other times that requires the D PAD
Press LEFT on the D PAD to activate/deactivate "RAPID FIRE ON/OFF"
Press RIGHT on the D PAD to activate/deactivate "RAPID FIRE CYCLING"
Press UP on the D PAD to activate/deactivate "TBD"
Press DOWN on the D PAD to activate/deactivate "DROP SHOT"
Press CROUCH in addition with any of the below. Using CROUCH helps to prevent accidental turn ON and OFF when operating killstreaks and/or other times that requires the D PAD
Press LEFT on the D PAD to activate/deactivate "HOLD BREATH"
Press RIGHT on the D PAD to activate/deactivate "ADS Fire"
Press UP on the D PAD to activate/deactivate "QUICK SCOPE"
Press DOWN on the D PAD to activate/deactivate "ANTI-RECOIL"
=============================================================================
GAMEPLAY COMMENTS
The timing and functionality with BO3 has not been tested yet.
Rapid Fire:
I am doing something different with rapid fire. Normally, I had been using a rate of fire variable
which was used to make the Hold and Rest Times needed for the rapid fire combo. I am not using direct hold and rest times.
I now have two toggles for rapid fire: (see the TOGGLES section above)
1) toggles rapid fire mod on/off and 2) cycles between different rapid fire values for hold and rest time.
This will help with testing and allow players to have different rapid fire values for different weapons
Quick Melee & Quick Reload:
Treyarch took out sprint reload cancel, so quick melee will not work. They also modified their code so we cannot do quick reload.
Drop Shot:
The Drop Shot combo is only started once the shoot button is initially pressed. It will not run again until it is released and re-pressed again.
If DISABLE_WITH_SCOPE is TRUE, Drop Shot occurs upon button press of SHOOT button without ADS. If you press ADS button after starting drop,
it will stop the drop shot combo. You must then release and re-press the SHOOT button to activate drop shot again. This interferes if you use
the mini gun specialist perk, so you can toggle it on/off while in the game.
Auto Sprint & Reloading:
Reload times vary with weapons and auto sprint can cause problems. You sometimes have to let off the joystick, hold the RELOAD button or hold ADS to reload fully
If it does not start sprinting right away, you can press the SPRINT button to start it.
You can adjust the reload wait time that best suits your weapons and reloads.
Anti-Recoil:
There is no one right value. See this thread for more information. http://www.consoletuner.com/forum/viewtopic.php?f=17&t=1155
If you are USING look inversion you need to change InversionON to TRUE.
Quick Scoping:
There are variables to play around with to meet your specific needs.
I am absolutely terrible at quick scoping, so I don't really use this and haven't tested it that much.
=============================================================================
IN GAME BUTTON LAYOUTS:
This script was based upon the DEFAULT button configuration.
USING THIS SCRIPT ON VARIOUS CONSOLES: This script will work with various consoles.
The Titan 1 maps the various controller variables (i.e PS4_R1, PS3_R1, XB1_RB, XB360_RB) to an index number.
See the below link for the data representation table. Therefore, PS4_R1 will work as XB1_RB OR XB360_RB without any changes to the script.
I am not using the menu, view, PS, select, etc. buttons, so they should not be an issue.
Data Representation Index
http://www.consoletuner.com/kbase/data_representation.htm?mw=MjQw&st=MA==&sct=MA==&ms=AAAA
=============================================================================
LED DEFINITIONS FOR PS4 LIGHT BAR
LED(0,0,0,0); // Off
LED(1,0,0,0); // Blue (default)
LED(0,1,0,0); // Red
LED(0,0,1,0); // Green
LED(0,0,0,1); // Pink
LED(1,0,1,0); // Cyan
LED(0,1,1,0); // Amber (aka yellow)
LED(1,1,1,1); // White
=============================================================================
DEFINES
*/
define ADS = PS4_L2; // R1 & L1 can be changed to R2 and L2
define EXO = PS4_L1; // R1 & L1 can be changed to R2 and L2
define SPRINT_EXO = PS4_L3;
define LX = PS4_LX;
define LY = PS4_LY;
define SHOOT = PS4_R2; // R1 & L1 can be changed to R2 AND L2
define GRENADE = PS4_R1; // R1 & L1 can be changed to R2 AND L2
define CROUCH = PS4_CIRCLE; // "Default" button layout is PS4_CIRCLE. "Tactical" button layout is PS4_R3.
define RX = PS4_RX;
define RY = PS4_RY;
define JUMP = PS4_CROSS;
define RELOAD = PS4_SQUARE;
define MELEE = PS4_R3; // "Default" button layout is PS4_R3. "Tactical button layout is PS4_CIRCLE.
define SWAP_WEAPONS = PS4_TRIANGLE;
define UP = PS4_UP;
define DOWN = PS4_DOWN;
define LEFT = PS4_LEFT;
define RIGHT = PS4_RIGHT;
define INSTA_FIRE = 95; // The % at which it boosts the SHOOT button when pressed - i.e. 95% means when pressed 5%
define INSTA_AIM = 95; // The % at which it boosts the ADS button when pressed - i.e. 95% means when pressed 5%
define INSTA_OTHER = 95; // The % at which it boosts the other button when pressed - i.e. 95% means when pressed 5%
define DROPSHOT_QUICKNESS = 95; // The % at which it boosts the CROUCH button when pressed - i.e. 95% means when pressed 5%
define ADS_SPEED = 20; // The % at which it boosts your aiming speed when using ADS
define DISABLE_WITH_SCOPE = TRUE; // Will not drop shot if ADS is on
define ANTI_RECOIL = 20; // Change this value to compensate to the vertical recoil ASM1 with rapidfire = 40, BAL no grip = 20; Bal with grp = 0;
define ANTI_RECOIL_LEFT = 0; // Change this value to compensate to the left
define ANTI_RECOIL_RIGHT = 0; // Change this value to compensate to the right
define ONLY_WITH_SCOPE = TRUE; // Anti-recoil will only be applied with ADS
define QUICK_SCOPE_WAIT = 500; // Increase this time for a longer ADS time. Decrease this time for a shorter ADS time
define RELOAD_WAIT = 2000; // Wait time after stopping auto sprint to allow reloading. Adjust as necessary
define SHOOT_WAIT = 300; // Wait time after stopping auto sprint to allow shooting
define DROP_SHOT_WAIT = 1000; // Wait time for drop shot combo (changed from 1200 to 1000)
// VARIABLES =============================================================================
int AkimboSingleON = FALSE; // Akimbo mode for regular single shot mode
int AkimboRapidON = FALSE; // Akimbo mode with rapid fire mode
int ThrustJumpON = FALSE;
int AutoSprintON = TRUE;
int AutoDashON = FALSE;
int QuickMelee_ON = FALSE;
int RapidFireON = FALSE;
int DropShotON = TRUE; // Always turned on now
int InversionON = FALSE; // Set this to TRUE if you are using look inversion enabled in the game setting. Most people are NOT using look inversion
int JitterON = FALSE;
int AntiRecoilON = FALSE;
int QuickScopeON = FALSE;
int QuickReloadON = FALSE;
int RapidFireCounter = 1;
int anti_recoil;
int anti_recoil_left;
int anti_recoil_right;
int ADS_Fire_On = FALSE;
int HoldBreathON = FALSE;
// Hold Time is the time in mSeconds that the SHOOT button is pressed. It varies depending on the weapon, game and attachments.
// Release time is the time between shooting. This will vary depending on the game timing that is coded into the game.
int HoldTime = 10; // defined in mSeconds for regular Rapid Fire
int RestTime = 10; // defined in mSeconds for regular Rapid Fire
int HoldTime2 = 10; // defined in mSeconds for Akimbo Rapid Fire
int RestTime2 = 10; // defined in mSeconds for Akimbo Rapid Fire
// MAIN SCRIPT =============================================================================
main {
vm_tctrl(-5); // sets main loop to 5mS vs the default 10mS
// Makes the button 100% pressed even if barely pressed - aka more sensitive and quicker reaction
if(get_val(CROUCH)){sensitivity(CROUCH, NOT_USE, 100 + DROPSHOT_QUICKNESS);}
if(get_val(ADS)){sensitivity(ADS, 10, 100 + INSTA_AIM);}
if(get_val(SHOOT)){sensitivity(SHOOT, 10, 100 + INSTA_FIRE);}
if(get_val(SPRINT_EXO)){sensitivity(SPRINT_EXO, 10, 100 + INSTA_OTHER);}
if(get_val(GRENADE)){sensitivity(GRENADE, 10, 100 + INSTA_OTHER);}
if(event_press(LEFT) && get_val(ADS)) { // Turn ON and OFF Rapid Fire
RapidFireON = !RapidFireON;
if(RapidFireON) {
combo_run(GreenLED);
combo_run(RumbleNotifier);
AkimboSingleON = FALSE; // Turn OFF Akimbo modes
AkimboRapidON = FALSE; // Turn OFF Akimbo modes
QuickScopeON = FALSE; // Turn OFF QuickScope
}
if(!RapidFireON) {combo_run(BlueLED);}
}
// Using this to cycle through rapid fire settings for testing. It can be used for having multiple rapid fire settings
// You can set these values to whatever you want and adjust how many different values that you want.
if(event_press(RIGHT) && get_val(ADS) && RapidFireON) {
RapidFireCounter = RapidFireCounter + 1;
combo_run(SingleNotifier);
if(RapidFireCounter > 5) {RapidFireCounter = 1;} // Change the "5" to how many options that you want
if(RapidFireCounter == 1){HoldTime = 10; RestTime = 10;} // Preset #1
if(RapidFireCounter == 2){HoldTime = 15; RestTime = 15;} // Preset #2
if(RapidFireCounter == 3){HoldTime = 20; RestTime = 20;} // Preset #3
if(RapidFireCounter == 4){HoldTime = 25; RestTime = 25;} // Preset #4
if(RapidFireCounter == 5){HoldTime = 30; RestTime = 30;} // Preset #5
}
if(event_press(DOWN) && get_val(ADS)) { // Turns ON and OFF Drop Shot
DropShotON = !DropShotON;
if(DropShotON) {
ADS_Fire_On = FALSE;
combo_run(AmberLED);
combo_run(RumbleNotifier);
}
if(!DropShotON) {combo_run(BlueLED);}
}
if(event_press(UP) && get_val(CROUCH)) { // Turns ON and OFF Quick Scope
QuickScopeON = !QuickScopeON;
if(QuickScopeON) {
AkimboSingleON = FALSE; // Turn OFF Akimbo modes
AkimboRapidON = FALSE; // Turn OFF Akimbo modes
RapidFireON = FALSE; // Turn OFF Rapid Fire
AntiRecoilON = FALSE; // Turn OFF Anti Recoil
}
}
if(event_press(DOWN) && get_val(CROUCH)) { // Turns ON and OFF Anti-Recoil
AntiRecoilON = !AntiRecoilON;
if(AntiRecoilON) {
combo_run(PinkLED);
combo_run(RumbleNotifier);
}
if(!AntiRecoilON) {combo_run(BlueLED);}
}
if(event_press(RIGHT) && get_val(CROUCH)) { // Turns ON and OFF ADS Fire
ADS_Fire_On = !ADS_Fire_On;
if(ADS_Fire_On) {
DropShotON = FALSE;
combo_run(WhiteLED);
combo_run(RumbleNotifier);
}
if(!ADS_Fire_On) {combo_run(BlueLED);}
}
if(event_press(LEFT) && get_val(CROUCH)) { // Turns ON and OFF auto hold breath
HoldBreathON = !HoldBreathON;
if(HoldBreathON) {
combo_run(WhiteLED);
combo_run(RumbleNotifier);
}
if(!HoldBreathON) {combo_run(BlueLED);}
}
if(get_val(SHOOT) && ADS_Fire_On && !DropShotON) {set_val(ADS,100);}
// Drop Shot
if(event_press(SHOOT) && DropShotON){
combo_stop(AutoSprint);
combo_run(DropShot);
}
if(DISABLE_WITH_SCOPE && get_val(ADS)) {combo_stop(DropShot);}
// Rapid Fire without ADS Fire
if(get_val(SHOOT) && RapidFireON && !ADS_Fire_On) {combo_run(RapidFire);}
// else if(combo_running(RapidFire)) {combo_stop(RapidFire);}
// Rapid Fire with ADS Fire
if(get_val(SHOOT) && RapidFireON && ADS_Fire_On) {combo_run(ADSRapidFire);}
// else if(combo_running(RapidFire)) {combo_stop(RapidFire);}
/* Personal Comment: I found that I have better game performance without using this. You can adjust your sensitivity for this.
// Faster movement while aiming with ADS
if(get_val(ADS)){
sensitivity(RX, NOT_USE, 100 + ADS_SPEED);
sensitivity(RY, NOT_USE, 100 + ADS_SPEED);
}
*/
// Anti-recoil
if(!ONLY_WITH_SCOPE || get_val(ADS)) {combo_run(AntiRecoil);}
// Quick Scope -- CANNOT ADS (aka regular scope) while using Quick Scope -- for regular ADS you must toggle off QuickScopeON -- see "Toggles" section at the top of this script
if(QuickScopeON && event_press(ADS) ) {combo_run(QuickScope);}
// Hold Breath
if(HoldBreathON && get_val(ADS)) {combo_run(HoldBreath);}
// AutoSprint -- Try different values (i.e. -90, -95); toggle ON/OFF
if(get_val(LY) < -99 && AutoSprintON && !combo_running(AllowReloading)) { combo_run(AutoSprint); }
else if((get_val(LY) > -99 && AutoSprintON)) {combo_stop(AutoSprint); } // Reload will also stop
// if(event_press(RELOAD)) {combo_stop(AutoSprint); combo_run(AllowReloading);} // Stop auto sprint to allow reloading (not needed for BO3)
if(get_val(SHOOT)) {combo_stop(AutoSprint); combo_run(AllowShooting);} // Stop auto sprint to allow shooting
} // End of MAIN
// COMBOS =============================================================================
combo AllowShooting {
set_val(SPRINT_EXO, 0);
wait(SHOOT_WAIT); // can adjust to ensure enough time for shooting
}
combo AllowReloading {
set_val(SPRINT_EXO, 0);
wait(RELOAD_WAIT); // can adjust to ensure enough time to reload
}
combo RapidFire {
set_val(SHOOT, 100);
wait(HoldTime);
set_val(SHOOT, 0);
wait(RestTime);
set_val(SHOOT, 0);
}
combo ADSRapidFire {
set_val(SHOOT, 100);
set_val(ADS, 100);
wait(HoldTime);
set_val(SHOOT, 0);
wait(RestTime);
set_val(SHOOT, 0);
set_val(ADS, 0);
}
combo DropShot {
set_val(SPRINT_EXO,0);
wait(15);
set_val(CROUCH, 100);
wait(15); // 15 is no slide in public but slide in private. 50 is slide in public but no slide in private
set_val(CROUCH, 100);
wait(DROP_SHOT_WAIT);
}
combo QuickScope {
set_val(ADS, 100);
wait(QUICK_SCOPE_WAIT) //Increase this time for a longer ADS time. Decrease this time for a shorter ADS time.
set_val(ADS, 0);
wait(10);
set_val(SHOOT, 100);
wait(20);
set_val(SHOOT, 0);
wait(60);
set_val(SHOOT, 0);
}
combo HoldBreath {
set_val(SPRINT_EXO, 100);
wait(10);
set_val(SPRINT_EXO, 100);
}
combo AutoSprint {
set_val(SPRINT_EXO, 100);
wait(10);
set_val(SPRINT_EXO, 100)
}
combo AntiRecoil {
// Look Inversion Enabled
if(get_val(SHOOT) && AntiRecoilON && InversionON) { // Using AntiRecoilON toggle for testing and when using multiple weapons
anti_recoil = get_val(RY) - ANTI_RECOIL; // SUBTRACT anti_recoil when LOOK INVERSION is ENABLED
if(anti_recoil > 100) anti_recoil = 100;
set_val(RY, anti_recoil);
anti_recoil_left = get_val(RX) - ANTI_RECOIL_LEFT;
if(anti_recoil_left > 100) anti_recoil_left = 100;
set_val(RX, anti_recoil_left);
anti_recoil_right = get_val(RX) + ANTI_RECOIL_RIGHT;
if(anti_recoil_right > 100) anti_recoil_right = 100;
set_val(RX, anti_recoil_right);
}
// Normal Look Inversion - look inversion disabled
if(get_val(SHOOT) && AntiRecoilON && !InversionON) { // Using AntiRecoilON toggle for testing and when using multiple weapons
anti_recoil = get_val(RY) + ANTI_RECOIL; // ADD anti_recoil for normal
if(anti_recoil > 100) anti_recoil = 100;
set_val(RY, anti_recoil);
anti_recoil_left = get_val(RX) - ANTI_RECOIL_LEFT;
if(anti_recoil_left > 100) anti_recoil_left = 100;
set_val(RX, anti_recoil_left);
anti_recoil_right = get_val(RX) + ANTI_RECOIL_RIGHT;
if(anti_recoil_right > 100) anti_recoil_right = 100;
set_val(RX, anti_recoil_right);
}
}
combo RumbleNotifier {
// double rumble
set_rumble(RUMBLE_A, 100);
wait(250);
set_rumble(RUMBLE_A, 0);
wait(50);
set_rumble(RUMBLE_A, 100);
wait(250);
set_rumble(RUMBLE_A, 0);
wait(20);
}
combo SingleNotifier {
// single rumble
set_rumble(RUMBLE_A, 100);
wait(200);
set_rumble(RUMBLE_A, 0);
wait(20);
}
combo BlueLED {
// blue (default)
set_led(LED_1, 1);
set_led(LED_2, 0);
set_led(LED_3, 0);
set_led(LED_4, 0);
}
combo GreenLED {
// green
set_led(LED_1, 0);
set_led(LED_2, 0);
set_led(LED_3, 1);
set_led(LED_4, 0);
}
combo PinkLED {
// pink
set_led(LED_1, 0);
set_led(LED_2, 0);
set_led(LED_3, 0);
set_led(LED_4, 1);
}
combo AmberLED {
// amber (aka yellow)
set_led(LED_1, 0);
set_led(LED_2, 1);
set_led(LED_3, 1);
set_led(LED_4, 0);
}
combo WhiteLED {
// white
set_led(LED_1, 1);
set_led(LED_2, 1);
set_led(LED_3, 1);
set_led(LED_4, 1);
}
-
boat_58 - First Sergeant
- Posts: 63
- Joined: Sat Nov 07, 2015 3:33 pm
Re: COD Black Ops 3 (BO3) version 1.6
UK_Wildcats_Fans wrote:boat_58 wrote:I just tested it but its yielding the same results as before. You are correct on what i want it to do btw. I see you commented out the sprint part out of the drop shot code. Its still doing the same thing. it just drops to the ground instead of sliding. I am not sure if this will help but to do it regularly, you have to sprint then hold on to the crouch button. If you sprint and push the crouch button, it won't slide it will just crouch. But if you are sprinting and you press and hold the crouch button, it will slide. I just figured that out just now. I am not sure why in private match though it does it perfect but in public matches it doesn't slide.
I commented out other sections of the code too where pressing the fire button would stop the auto sprint combo. I don't know if these sections were needed, but I want to try to take everything that could interfere.
That is a very astute observation that may be part of what is causing the issue. The drop shot combo works by pressing crouch and then repressing it. First is crouch and the second is need to lay down. The first crouch only waits 15 mS before initiating the 2nd crouch. That timing (i.e. short vs long hold of the crouch) may be issue.
If you have time, here are some tests that you can run. Below is the drop shot combo. Try increase the wait(15) time after the first crouch to see if it ever gets the slide working.
- Code: Select all
combo DropShot {
// set_val(SPRINT_EXO,0);
// wait(15)
set_val(CROUCH, 100);
wait(15) // try different values here
set_val(CROUCH, 100);
wait(DROP_SHOT_WAIT);
}
Here is how I make test things to make them faster. I load several versions of the same script into different memory slots and then cycle through the memory slots for testing. Below is an example.
Slot 1 - default script as I provided above
Slot 2 - same script but only change the wait time in the combo from 15 to 50 as described above
Slot 3 - wait time is 100
Slot 4 - wait time is 150
Slot 5 - wait time is 200
Slot 6 - wait time is 250
Let's assume that I find that it works best between 50 to 100 mS. I then delete slot 3 to 5 and go with smaller increments.
Slot 2 - keep the same for reference
Slot 3 - wait time is 60
Slot 4 - wait time is 70
Slot 5 - wait time is 80
Slot 6 - wait time is 90
Slot 7 - wait time is 100
This will help to test quickly without having to go in and out of games.
If you don't get a chance to test, I will try it later tonight.
I believe i might know what the problem is. No1 when sprinting you can only sprint for so long and when that cycle is done and you try to sprint again right away you only sprint for a very short distance until a certian amount of time goes by and then you can sprint longer again. I noticed if your trying to slide but you're on or near the end of your sprint cycle time you just end up crouching. So until that second of time passes to where you can sprint fully again you'll just end up crouching. Correct me if im wrong tho. I don't think there will be a way around this but it don't happen to often in game to really bother me but everyone's different. I will test to confirm 100% if this is the case but im pretty positive.
-
kuni808 - Sergeant Major
- Posts: 88
- Joined: Sat Sep 05, 2015 3:54 am
Re: COD Black Ops 3 (BO3) version 1.7
Why does anti recoil doesn't have that much effect.with the vesper it has some recoil. But the anti recoil isn't working
-
Koushik - Sergeant First Class
- Posts: 17
- Joined: Mon Oct 26, 2015 4:25 pm
Re: COD Black Ops 3 (BO3) version 1.7
Koushik wrote:Why does anti recoil doesn't have that much effect.with the vesper it has some recoil. But the anti recoil isn't working
You need to look at anti recoil in the script and raise the vertical value/number which is 20 by default. 20 isnt that noticeable so try raising it by 5 until your satisfied.
- Code: Select all
define ADS_SPEED = 20; // The % at which it boosts your aiming speed when using ADS
define DISABLE_WITH_SCOPE = TRUE; // Will not drop shot if ADS is on
define ANTI_RECOIL = 20; // Change this value to compensate to the vertical recoil ASM1 with rapidfire = 40, BAL no grip = 20; Bal with grp = 0;
define ANTI_RECOIL_LEFT = 0; // Change this value to compensate to the left
define ANTI_RECOIL_RIGHT = 0; // Change this value to compensate to the right
define ONLY_WITH_SCOPE = TRUE; // Anti-recoil will only be applied with ADS
define QUICK_SCOPE_WAIT = 500; // Increase this time for a longer ADS time. Decrease this time for a shorter ADS time
define RELOAD_WAIT = 2000; // Wait time after stopping auto sprint to allow reloading. Adjust as necessary
define SHOOT_WAIT = 300; // Wait time after stopping auto sprint to allow shooting
define DROP_SHOT_WAIT = 1000; // Wait time for drop shot combo (changed from 1200 to 1000)
-
kuni808 - Sergeant Major
- Posts: 88
- Joined: Sat Sep 05, 2015 3:54 am
Return to GPC1 Script Programming
Who is online
Users browsing this forum: No registered users and 120 guests