Fortnite Battle Royale: Turbo Instant-Build AIO Script

Documentation, usage tips and configuration guides for Titan Two scripts and bytecodes published by the community users.

Re: Fortnite Battle Royale: Turbo Instant-Build AIO Script

Postby alanmcgregor » Thu Aug 02, 2018 2:37 am

Thank you for your kind comments. I appreciated.

I'm back, ready to resume script support. I hope next weekend have some spare time to work on it.

Auto Slot Swap Fire, is fixed. I had to rewrite the combos. I read something about accidental activation of this mod. Jumping while holding down Reload/Use seems to me unlikely or an erratic technique. I can't change the script if only a few people has issue with that.

Dr.Snibbel wrote:Can i turn off turbo build?

Yes you can, if you prefer placing each piece manually. Instant Build feature keeps working though. Instant Build is when you change from one piece to a different one this feature allows you to press only once, instead of double tap (press for selection, press again for placing a piece).

I don't mind to make the other mods activate separately from the Turbo InstantBuild trait, but again I need more people asking for this change. Because that might required additional code for avoid off-sync scenarios.
Image
User avatar
alanmcgregor
Major
Major
 
Posts: 839
Joined: Tue Mar 27, 2018 8:38 am

Re: Fortnite Battle Royale: Turbo Instant-Build AIO Script

Postby rlatpwo123 » Thu Aug 02, 2018 6:14 am

oh!! alaan! I was waiting for you and thank you for coming back.

Could you check these two?

1. brust fire not work!

2. "between button delay" and "same button delay" more low update for more fast internet ping??
User avatar
rlatpwo123
Sergeant First Class
Sergeant First Class
 
Posts: 24
Joined: Mon May 21, 2018 12:21 am

Re: Fortnite Battle Royale: Turbo Instant-Build AIO Script

Postby alanmcgregor » Thu Aug 02, 2018 6:43 pm

Script Updated:
- Auto Slot Swap Fire is back, fully working.

- Auto Burst Fire. used to have a delay before kick in, I remove the delay.
Reminder, you can change the Hold and Release delay for a lower timings to turning into a rapid-fire mod.

LEDS:
Blue = Combat Mode, no mods.
Yellow = Enhanced Aim Assist is ON
Green = Aim Abuse (ADS Spam) is ON
White = Enhanced Aim Assist AND Aim Abuse are ON.
Last edited by alanmcgregor on Thu Aug 02, 2018 6:58 pm, edited 1 time in total.
Image
User avatar
alanmcgregor
Major
Major
 
Posts: 839
Joined: Tue Mar 27, 2018 8:38 am

Re: Fortnite Battle Royale: Turbo Instant-Build AIO Script

Postby alanmcgregor » Thu Aug 02, 2018 6:56 pm

rlatpwo123 wrote:1. brust fire not work!

2. "between button delay" and "same button delay" more low update for more fast internet ping??

Do you mean lower this timings for a faster ping?

1. did a small change you should notice when is working.

2. - yes, do it.
Image
User avatar
alanmcgregor
Major
Major
 
Posts: 839
Joined: Tue Mar 27, 2018 8:38 am

Re: Fortnite Battle Royale: Turbo Instant-Build AIO Script

Postby Shthappensbro » Thu Aug 02, 2018 7:53 pm

alanmcgregor wrote:
rlatpwo123 wrote:1. brust fire not work!

2. "between button delay" and "same button delay" more low update for more fast internet ping??

Do you mean lower this timings for a faster ping?

1. did a small change you should notice when is working.

2. - yes, do it.


aim assist is way to fast in a circle tbh for my ping cant controll it some times moves my screen crazy
User avatar
Shthappensbro
Captain
Captain
 
Posts: 745
Joined: Wed Aug 16, 2017 4:55 pm

Re: Fortnite Battle Royale: Turbo Instant-Build AIO Script

Postby Blablubb » Thu Aug 02, 2018 8:56 pm

Hi Alan

I tested your Script now and all works great. Thanks.

But when i activate aim abuse then ADS spammt in & out so freaking fast that i cant hit anything.
In your Demo its not, why?
User avatar
Blablubb
Sergeant First Class
Sergeant First Class
 
Posts: 24
Joined: Wed Jul 18, 2018 6:16 pm

Re: Fortnite Battle Royale: Turbo Instant-Build AIO Script

Postby rlatpwo123 » Thu Aug 02, 2018 11:37 pm

alanmcgregor wrote:
rlatpwo123 wrote:1. brust fire not work!

2. "between button delay" and "same button delay" more low update for more fast internet ping??

Do you mean lower this timings for a faster ping?

1. did a small change you should notice when is working.

2. - yes, do it.


i mean now between different button delay max low value "45" and between same button delay max low value "30"

>>>To change to a max lower value update please

ex: between different button delay max low value - 20 between same button delay max low value - 10
User avatar
rlatpwo123
Sergeant First Class
Sergeant First Class
 
Posts: 24
Joined: Mon May 21, 2018 12:21 am

Re: Fortnite Battle Royale: Turbo Instant-Build AIO Script

Postby alanmcgregor » Fri Aug 03, 2018 1:38 am

Sl3vin wrote:Hi Alan

I tested your Script now and all works great. Thanks.

But when i activate aim abuse then ADS spammt in & out so freaking fast that i cant hit anything.
In your Demo its not, why?

In my demo, I was using 150/18 and 220/20. I have 100ms ping avg according to uotrace utility. Try different values find out which ones works better for your Internet connection. A 9 to 11 divider seems to work OK,
meaning your ADS Spam HOLD = X, your ADS Spam Release must be X/11.
e.g.
ADS Hold = 180,
ADS Release = 180 / 11 = 16

BTW On the next video is explained how you can take the most Aim Assist and best scenarios to use the ADS Spam (Aim Abuse)
HOW TO IMPROVE YOUR AIM IN FORTNITE: Controller Aim Guide

rlatpwo123 wrote:
i mean now between different button delay max low value "45" and between same button delay max low value "30"

>>>To change to a max lower value update please

ex: between different button delay max low value - 20 between same button delay max low value - 10

That's correct, delays between different buttons must be a bit higher than same button delay. Anything 10 or below ms might give you problems, no matter how fast your internet is 10 ms or lower is way too low.
Image
User avatar
alanmcgregor
Major
Major
 
Posts: 839
Joined: Tue Mar 27, 2018 8:38 am

Re: Fortnite Battle Royale: Turbo Instant-Build AIO Script

Postby rlatpwo123 » Fri Aug 03, 2018 2:12 am

ok!!! alan.. i want just chang to a max lower value update,,

i want just different button delay value 20~25 (right now max low delay 45 )
User avatar
rlatpwo123
Sergeant First Class
Sergeant First Class
 
Posts: 24
Joined: Mon May 21, 2018 12:21 am

Re: Fortnite Battle Royale: Turbo Instant-Build AIO Script

Postby Shthappensbro » Fri Aug 03, 2018 1:30 pm

alanmcgregor wrote:
Sl3vin wrote:Hi Alan

I tested your Script now and all works great. Thanks.

But when i activate aim abuse then ADS spammt in & out so freaking fast that i cant hit anything.
In your Demo its not, why?

In my demo, I was using 150/18 and 220/20. I have 100ms ping avg according to uotrace utility. Try different values find out which ones works better for your Internet connection. A 9 to 11 divider seems to work OK,
meaning your ADS Spam HOLD = X, your ADS Spam Release must be X/11.
e.g.
ADS Hold = 180,
ADS Release = 180 / 11 = 16

BTW On the next video is explained how you can take the most Aim Assist and best scenarios to use the ADS Spam (Aim Abuse)
HOW TO IMPROVE YOUR AIM IN FORTNITE: Controller Aim Guide

rlatpwo123 wrote:
i mean now between different button delay max low value "45" and between same button delay max low value "30"

>>>To change to a max lower value update please

ex: between different button delay max low value - 20 between same button delay max low value - 10

That's correct, delays between different buttons must be a bit higher than same button delay. Anything 10 or below ms might give you problems, no matter how fast your internet is 10 ms or lower is way too low.




okay i have 59 to 80 ping witch would be best for ads spam only problem im having now is the a assistant on ur script the cricle movement needs lowering for me some time my screen freaks out can u add that in ur script to change?
User avatar
Shthappensbro
Captain
Captain
 
Posts: 745
Joined: Wed Aug 16, 2017 4:55 pm

PreviousNext

Return to User's Script Documentation

Who is online

Users browsing this forum: Google [Bot] and 11 guests