Gtuner Air: the smartphone/tablet App for the Titan Two
Cannot transfer bytecode from Gtuner Air
I connected Gtuner Air to Titan two for the first time.
Even if I select the saved GBC and tap “Load and run”, it does not move forward no matter how much time passes with “Storing Bytecode ...” displayed.
I tried several GBCs but all had the same symptoms.
I don't know what's wrong.
Is there a mistake in my usage?
Even if I select the saved GBC and tap “Load and run”, it does not move forward no matter how much time passes with “Storing Bytecode ...” displayed.
I tried several GBCs but all had the same symptoms.
I don't know what's wrong.
Is there a mistake in my usage?
-
hiraken - Master Sergeant
- Posts: 31
- Joined: Wed Mar 06, 2019 6:04 am
Re: Gtuner Air: the smartphone/tablet App for the Titan Two
Need some help.
I've installed the bluetooth module, formatted/configured the SD card, but when I try to connect to the Titan Two via GTuner Air for iOS, it just spins on "Scanning for Titan Two device" and never connects. Is there something I'm doing wrong?
I've installed the bluetooth module, formatted/configured the SD card, but when I try to connect to the Titan Two via GTuner Air for iOS, it just spins on "Scanning for Titan Two device" and never connects. Is there something I'm doing wrong?
-
numberone - Staff Sergeant
- Posts: 14
- Joined: Thu Sep 05, 2019 7:50 pm
Re: Gtuner Air: the smartphone/tablet App for the Titan Two
numberone wrote:Need some help.
I've installed the bluetooth module, formatted/configured the SD card, but when I try to connect to the Titan Two via GTuner Air for iOS, it just spins on "Scanning for Titan Two device" and never connects. Is there something I'm doing wrong?
Hmm, I think the SD card is bad. Originally I was getting FS Error (2) but I removed the card, put it back in, formatted and ran the "Configure" option and it seemed like it completed successfully. The BT module was showing as loaded (at least from what I could tell). But I tried formatting the SD card again and it just keeps failing. Tried to format it on macOS as FAT and that failed too. Going to go out to BBY and buy a new microSD card and see if that works.
-
numberone - Staff Sergeant
- Posts: 14
- Joined: Thu Sep 05, 2019 7:50 pm
Re: Gtuner Air: the smartphone/tablet App for the Titan Two
numberone wrote:numberone wrote:Need some help.
I've installed the bluetooth module, formatted/configured the SD card, but when I try to connect to the Titan Two via GTuner Air for iOS, it just spins on "Scanning for Titan Two device" and never connects. Is there something I'm doing wrong?
Hmm, I think the SD card is bad. Originally I was getting FS Error (2) but I removed the card, put it back in, formatted and ran the "Configure" option and it seemed like it completed successfully. The BT module was showing as loaded (at least from what I could tell). But I tried formatting the SD card again and it just keeps failing. Tried to format it on macOS as FAT and that failed too. Going to go out to BBY and buy a new microSD card and see if that works.
Turns out the microSD card was bad. Bought a 32 GB one from BBY, formatted it, configured it, now the BT module is working fine.
-
numberone - Staff Sergeant
- Posts: 14
- Joined: Thu Sep 05, 2019 7:50 pm
Re: Gtuner Air: the smartphone/tablet App for the Titan Two
numberone wrote:Turns out the microSD card was bad. Bought a 32 GB one from BBY, formatted it, configured it, now the BT module is working fine.
Glad to hear it's working
ConsoleTuner Support Team || ConsoleTuner Discord || InputSense Discord
- Mad
- Major General
- Posts: 4536
- Joined: Wed May 22, 2019 5:39 am
Re: Gtuner Air: the smartphone/tablet App for the Titan Two
Mad wrote:numberone wrote:Turns out the microSD card was bad. Bought a 32 GB one from BBY, formatted it, configured it, now the BT module is working fine.
Glad to hear it's working
Thanks. I should also add that Gtuner IV crashes quite frequently on macOS Catalina, but then again Catalina has not been great so far for other things. Think I'm going to downgrade back to Mojave.
-
numberone - Staff Sergeant
- Posts: 14
- Joined: Thu Sep 05, 2019 7:50 pm
Re: Cannot transfer bytecode from Gtuner Air
hiraken wrote:I connected Gtuner Air to Titan two for the first time. Even if I select the saved GBC and tap “Load and run”, it does not move forward no matter how much time passes with “Storing Bytecode ...” displayed. I tried several GBCs but all had the same symptoms. I don't know what's wrong.
It seems there is some sort communication issue between Gtuner Air and the Titan Two.
hiraken wrote:Is there a mistake in my usage?
Are you on iOS or Android?
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Cannot transfer bytecode from Gtuner Air
J2Kbr wrote:hiraken wrote:I connected Gtuner Air to Titan two for the first time. Even if I select the saved GBC and tap “Load and run”, it does not move forward no matter how much time passes with “Storing Bytecode ...” displayed. I tried several GBCs but all had the same symptoms. I don't know what's wrong.
It seems there is some sort communication issue between Gtuner Air and the Titan Two.hiraken wrote:Is there a mistake in my usage?
Are you on iOS or Android?
I am using Android.
Changes to Connect and Output Protocol can be made normally.
-
hiraken - Master Sergeant
- Posts: 31
- Joined: Wed Mar 06, 2019 6:04 am
Re: Gtuner Air: the smartphone/tablet App for the Titan Two
Thank you for confirming your are using with Android.
I just tested with an Android phone and it worked as expected. Could you please inform what is the Android version you have installed in your device? Thank you.
I just tested with an Android phone and it worked as expected. Could you please inform what is the Android version you have installed in your device? Thank you.
ConsoleTuner Support Team
-
J2Kbr - General of the Army
- Posts: 20323
- Joined: Tue Mar 18, 2014 1:39 pm
Re: Gtuner Air: the smartphone/tablet App for the Titan Two
Hello. Can I connect Gtuner Air Android OS via OTG cable to my phone?
-
Marcin - Private
- Posts: 1
- Joined: Thu Oct 17, 2019 7:23 am
Return to Gtuner Air Mobile App Support
Who is online
Users browsing this forum: No registered users and 43 guests