Titan One Protective Shell!

Any general discussion that is not related to the Titan One device goes here.

Titan One Protective Shell!

Postby NitemareMarauder » Tue Feb 27, 2018 11:02 pm

Wasnt sure where to post this but i made a "otterbox like case" for the titan one.

One flaw i have encountered with the titan one is that when plugged into the console it sticks out very far, i am not a fan of a $60 Usb device that could be snapped off or horribly bent by a cord being yanked or a foot accidentally kicking it. i have been the victim of this very situation TWICE (Thats $120 gone :icon_frown: .) and for fear of it happening again i have designed a protective shell for it! :joia:

it takes a Female USB A to Female Micro-USB adapter and a Right angle Male Mini-B to Female Micro-USB adapter and provides a outer shell to protect all the potentially dangerous areas..

it uses these specific parts-

https://www.ebay.com/itm/USB-2-0-A-Female-to-Micro-USB-B-5-Pin-Female-Data-Adapter-Convertor-/281766695255

https://www.ebay.com/itm/5-pin-Micro-B-Female-to-USB-2-0-Mini-A-5P-male-Right-angle-Adapter-convertor-HUB/321966369739?hash=item4af6b0ebcb:g:thoAAOSwLN5WijMg

it allows the titan one to be whatever distance you want away from the console or just out of the way of traffic so your precious investment doesnt get broken off or stepped on, all you need is two regular micro usb cables that your smartphone probably uses and your all set.
there is some bowing in the pictures because i got a few dimensions too tight, but i am tweaking my design until it is perfect. i wanted to make a post in case anyone else had ideas on improvements. When i am 100% sure it is perfect i will most likely upload the design to shapeways or another cheaper alternative in case anyone else wants protection.

20180227_160604.jpg
Protective Shell Top Piece.
20180227_160604.jpg (248.1 KiB) Viewed 127 times

20180226_141753.jpg
From Above
20180226_141753.jpg (224.58 KiB) Viewed 127 times

20180226_141757.jpg
Input Side
20180226_141757.jpg (95.38 KiB) Viewed 127 times

20180226_141800.jpg
Output Side
20180226_141800.jpg (203.63 KiB) Viewed 127 times

20180226_142739.jpg
Input With Cords
20180226_142739.jpg (154.98 KiB) Viewed 127 times

20180226_142755.jpg
Output With Cords
20180226_142755.jpg (160.97 KiB) Viewed 127 times

20180226_142753.jpg
Over View With Cords
20180226_142753.jpg (187.77 KiB) Viewed 127 times
User avatar
NitemareMarauder
Master Sergeant
Master Sergeant
 
Posts: 40
Joined: Thu Dec 07, 2017 12:30 pm

Re: Titan One Protective Shell!

Postby J2Kbr » Wed Feb 28, 2018 1:44 pm

Very nice project/solution. Thank you for sharing with us. :)
ConsoleTuner Support Team
User avatar
J2Kbr
General of the Army
General of the Army
 
Posts: 13930
Joined: Tue Mar 18, 2014 1:39 pm

Re: Titan One Protective Shell!

Postby prototype » Fri Mar 02, 2018 4:39 pm

Yes very nice protective shell. I also use a right angle for the PC PROG port to be less troublesome and an USB extension between the console and the Titan One, very effective not to damage the device.
User avatar
prototype
Brigadier General
Brigadier General
 
Posts: 2257
Joined: Sun Dec 16, 2012 1:43 pm


Return to Off Topic Discussion

Who is online

Users browsing this forum: No registered users and 2 guests