Ds4 to Bluetooth Titan two to pc or ps4 no control

Titan Two general support. Questions, firmware update, feature request.

Moderator: J2Kbr

Ds4 to Bluetooth Titan two to pc or ps4 no control

Postby awaxnova » Thu Jun 14, 2018 4:10 pm

Hi, I have a ds4 connected to my titan two via Bluetooth.

I can change the leds on the t2 and ds4 via gtuner and the prog port,
proving that the connection exists.

I cannot see any controller activity on device monitor when I activate the ds4 sticks or buttons.
This ds4 device monitor does work in wired usb mode.

I also can authenticate to ps4 via the t2 output port, but the ds4 doesn't affect the ps4...
it acts like I'm not even trying to activate the ds4 sticks or buttons.

I know that the ds4 is connected to the t2 since the up down buttons on t2 can change
my ds4 led color.

What can I do to get the bt connected ds4 to make the t2 control
the ps4 or the device monitor in gtuner?

Thank you.
User avatar
awaxnova
Private First Class
Private First Class
 
Posts: 3
Joined: Thu Jun 14, 2018 3:56 pm

Re: Ds4 to Bluetooth Titan two to pc or ps4 no control

Postby glenntidbury » Thu Jun 14, 2018 5:32 pm

I had similar behaviour when my ds4 was connected to a wireless charger. If you're using something similar, you could try removing that from the equation.

Other than that, ensure that the ds4 isn't still registered to the PS4, reset it via the pin hole button on the back,repair it to the T2, and see if you get any better results?
User avatar
glenntidbury
Sergeant First Class
Sergeant First Class
 
Posts: 17
Joined: Thu May 24, 2018 4:34 pm

Re: Ds4 to Bluetooth Titan two to pc or ps4 no control

Postby awaxnova » Thu Jun 14, 2018 7:30 pm

Thank you. So far, no change after reconnecting post reset. I held the button in for 10 seconds while the ds4 wss on. I don't have a wireless charger - but might get one now that I know they exist :)
User avatar
awaxnova
Private First Class
Private First Class
 
Posts: 3
Joined: Thu Jun 14, 2018 3:56 pm

Re: Ds4 to Bluetooth Titan two to pc or ps4 no control

Postby Scachi » Sun Jun 17, 2018 10:37 am

Have you tested it the other way around ? Can you control the Titan Two with your controller over bluetooth - changing slots by holder down R1 or L1 and press PS button on the controller ?

Is it a ds4 controller from the PS4 pro - with the lightbar visible at the touchpad ? I can only get the older ones to pair reliable over bluetooth.

Have you deleted the controller from the ps4 menu devices->bluetooth bluetooth devices before trying to pair it to the T2?

Try to pair the controller to the T2 without having the PS4 powered on just to make sure that the controller isn't bypassing the T2 and connects to the ps4 system directly.
User avatar
Scachi
Captain
Captain
 
Posts: 627
Joined: Wed May 11, 2016 6:25 am
Location: Germany

Re: Ds4 to Bluetooth Titan two to pc or ps4 no control

Postby awaxnova » Mon Jun 18, 2018 2:07 am

Thank you for the suggestions! I will try them and get back to you...

Do you mean to say that I can't use the new controller with titan two?
It's the reason I bought t2 to replace my t1.
But yes, it's the new controller type.

I've paired with the ps4 off, but haven't deleted it from the ps4 bt device list.
User avatar
awaxnova
Private First Class
Private First Class
 
Posts: 3
Joined: Thu Jun 14, 2018 3:56 pm

Re: Ds4 to Bluetooth Titan two to pc or ps4 no control

Postby Scachi » Mon Jun 18, 2018 7:21 am

awaxnova wrote:Thank you for the suggestions! I will try them and get back to you...

Do you mean to say that I can't use the new controller with titan two?
It's the reason I bought t2 to replace my t1.
But yes, it's the new controller type.

I've paired with the ps4 off, but haven't deleted it from the ps4 bt device list.


I have tested it yesterday again. Deleting the device from the ps4 bt device list.
Shutting down the PS4 and syncing the new controller to the T2 work.
The controller works fine for me then with the T2 over bt and T2 connected via usb to my ps4.
It looks like the trouble of connecting via bt to the T2 starts for me after connecting the controller again via usb to the t2 (done that for recharging).

So, the new controller works over bt with the T2 for me.
I have to test if connecting it via usb again after using it via bt will start the connection trouble every time.

For the new controllers to use with the T2 you have to configure the controller to communicate over USB in the playstations menu:
On PlayStation 4, enable wired communication:
Settings → Devices → Controllers → Communication Method: Use USB Cable.
Configure the Output Protocol of the Titan Two to USB Automatic or USB PlayStation 4.
User avatar
Scachi
Captain
Captain
 
Posts: 627
Joined: Wed May 11, 2016 6:25 am
Location: Germany


Return to Titan Two Device

Who is online

Users browsing this forum: No registered users and 23 guests