Designed to filter out unwanted fast taps on the LS button. When a long enough press is detected, a short pulsed down-up of the A button is triggered along with a short rumble and blink of an LED. For more on accessible gaming, see SpecialEffect at www.SpecialEffect.org.uk.

This script takes LS/L3 input and inverts it, outputting as the A/CROSS button. This can be adapted so that a person rests their finger down on a button, and nothing happens, but when they lift their finger it will activate the control (push-to-break instead of the normal push-to-make a circuit). This was originally designed to invert the function of a blink switch. The user could have their eyes-shut and nothing happens, but when they open them, they make a selection. For more on accessible gaming, see SpecialEffect at www.SpecialEffect.org.uk.

Very simple script to remap controls A to button B, and vice versa. All Xbox 360 codes included which will work across PS3, PS4 and Xbox One. For more on accessible gaming, see SpecialEffect at www.SpecialEffect.org.uk.

This simply reduces the strength of the triggers, by dividing the input by 3. This could be of benefit to someone finding a specific car far too fast for them to be able to control. For more on accessible gaming, see SpecialEffect at www.SpecialEffect.org.uk.

This script enables the L3 and R3 buttons to explore a world, such as Proteus on the PS3. L3 = Forward movement on/off (R-Stick UP) R3 = Look left or right alternately whilst held. For more on accessible gaming, see SpecialEffect at www.SpecialEffect.org.uk.

This script latches L2 (or L-TRIGGER) on and off. This can easily be adjusted and expanded upon. Originally uploaded to assist a player with Batman, it could be easily changed to R2 to make driving games easier. Adjust the TOGGLE_VAL if the motion is too fast. For more on accessible gaming, see SpecialEffect at www.SpecialEffect.org.uk.

The first successful Rapid Fire + Anti-Recoil script meant for First Person Shooters! Click "Announcement Topic" (below ratings) for more info! ->

For best results use with a wireless controller, or a Titan One with the latest firmware as old firmware may have power and freezing issues when operating this over USB. Outdated Titan One firmware may freeze up when handling both vibration motors at the same time, and/or frequent starting/stopping of motor.

This is just a simple Minecraft mod I made to automate the task of laying blocks in mid air

This function can be used to detect a double-tap on any button. It's as simple as that!