Ken Trial 23

Super Street Fighter 4 Trials - Ken # 23 Position: Facing right. Push Dan against the wall and move back one black line away from Dan. Line Ken's foot up with the side of that line that is furthest from Dan and activate with LS. This one is super annoying as you need to charge the focus just right to knock Dan down. Not enough and and he doesn't get knocked down and too much and he blocks. Even if it is just right he may still decide to block half the time! I have tried the timing many many different ways and this is definitely the only way to do it. Probably just annoying for me as if you are using this will only take 5 or 6 clicks of a button to get it right! * These won't always work first time for a variety of reasons just try it a few times from slightly different positions, it will work!
Version1.00
AuthorJayD101
Publish DateWed, 14 May 2014 - 13:06
Last UpdateWed, 14 May 2014 - 13:06
Downloads67
RATE


2

0

Code: Select all
 
main {  if(get_val(XB360_LS)) combo_run(KenT23);
        if(get_val(XB360_RS)) combo_stop(KenT23);
}
 
combo KenT23 {
    set_val(XB360_UP, 100);
    set_val(XB360_RIGHT, 100);
    wait(20);
    set_val(XB360_UP, 0);
    set_val(XB360_RIGHT, 0);
    wait(550);
    set_val(XB360_RT, 100);
    wait(20);
    set_val(XB360_RT, 0);
    wait(400);
    set_val(XB360_RB, 100);
    wait(20);
    set_val(XB360_RB, 0);
    wait(150);
    set_val(XB360_DOWN, 100);
    wait(20)
    set_val(XB360_DOWN, 100);
    set_val(XB360_RIGHT, 100);
    wait(20);
    set_val(XB360_DOWN, 0);
    set_val(XB360_RIGHT, 100);
    set_val(XB360_Y, 100);
    set_val(XB360_RB, 100);
    wait(20);
    set_val(XB360_Y, 0);
    set_val(XB360_RB, 0);
    set_val(XB360_RIGHT, 0);
    wait(300);
    set_val(XB360_Y, 100);
    set_val(XB360_B, 100);
    wait(350);
    set_val(XB360_Y, 0);
    set_val(XB360_B, 0);
    wait(20);
    set_val(XB360_RIGHT, 100);
    wait(20);
    set_val(XB360_RIGHT, 0);
    wait(20);
    set_val(XB360_RIGHT, 100);
    wait(20)
    set_val(XB360_RIGHT, 0);
    wait(750)
    set_val(XB360_DOWN, 100);
    wait(20);
    set_val(XB360_DOWN, 100);
    set_val(XB360_RIGHT, 100);
    wait(20);
    set_val(XB360_DOWN, 0);
    set_val(XB360_RIGHT, 100);
    wait(20);
    set_val(XB360_DOWN, 100);
    wait(20);
    set_val(XB360_DOWN, 100);
    set_val(XB360_RIGHT, 100);
    wait(20);
    set_val(XB360_DOWN, 0);
    set_val(XB360_RIGHT, 100);
    set_val(XB360_LT, 100);
    wait(100);
    set_val(XB360_RIGHT, 0);
    set_val(XB360_LT, 0);
}