Menu

GamePack Configuration

 
      Gamepacks can have a set of settings for customization. The settings are usually made using the controller, as explained on the Gamepack instructions. However, you can also customize a Gamepack using the configuration interface, by clicking on the slot number associated to the Gamepack.
 
GamePack Configuration
 
1

Configuration type: Choose One Value

1. Configuration type: Choose One Value
Configurations in drop-down list allows the user to choose one value from a list of available options. When a new value is selected the control displays the active value.
 
2

Configuration type: Enter a Value

2. Configuration type: Enter a Value
Configuration in a spinner, also known as a numeric updown, allows the user adjust a value in an adjoining text box by either clicking on an up or down arrow, or by holding an arrow down, causing the value in the text box to increase (if the up arrow is held down) or decrease (if the down arrow is held down). The value of the spinner is displayed in a text box next to the spinner, allowing the user to use the spinner to adjust the value, or to type the value into the text box.
 
3

Enable Configuration

3. Enable Configuration
Check this option to include this configuration when programming the Titan One device slots.
The slot settings on Titan One will be overwritten by the current configuration, the changes made directly on device (using the controller) will not be reflected in the Configuration Interface.
4

GamePack Instructions

4. GamePack Instructions
The instruction of how to use a Gamepack can be accessed by clicking the CHM button.
 
5

Reset Configuration

5. Reset Configuration
Reset the Gamepack settings to default values may be required in case of starting a new configuration. Restoring the default settings of the Gamepack can be done through the indicated button, a warning message box will pop-up to confirm the operation.