Wiimote and Extensions
Enable Wiimote Bluetooth searching
Enable Wiimote Bluetooth searching in Device Options. In order to change this option the Titan One device needs to be connected to your computer by the PCPROC side port, through a USB cable.
Connect your compatible Bluetooth dongle to the Titan One input port
To add Bluetooth capability to Titan One device you will need a Bluetooth USB Adapter compliant with 2.1+ EDR standard.
Hold down the buttons 1 and 2 at the same time
The LED on the controller should start blinking, meaning the controller is trying to connect with Titan One device. Wait until only one LED stay lighted. If the controller turn off hold down the buttons 1 and 2 again.
Your Wiimote controller is connected when the display shows 0 with no dot at the bottom.
If after a few tries your Wiimote still does not connect, try the sync button (red button on the back of controller).
Optionally you can use the Nunchuk, Classic Controller or Classic Controller Pro attached to your Wiimote. Other extensions, such as MotionPlus, are not supported.