Menu

XBox One S Controller Wireless Mode

 
 

First time pairing: Step-by-step

 

Enable Bluetooth searching

Enable Bluetooth searching in Device Options. In order to change this option the Titan One device needs to be connected to your computer by the PCPROC side port, through a USB cable.
 

Connect your compatible Bluetooth dongle to the Titan One input port

To add Bluetooth capability to Titan One device you will need a Bluetooth USB Adapter compliant with 4.0+ standard.
 

Hold down the sync button on the Xbox One S controller

The Xbox LED on the controller should start blinking white, meaning the controller is trying to connect with Titan One device. Wait until the Xbox LED stop blinking. If the controller turn off hold down the sync button again.
 

OPTIONAL: Disable Bluetooth searching

Disable Bluetooth searching to speed up subsequent Xbox One S controller wireless connection (after the controller be paired).
 
 

Regular use: Step-by-step

 

Connect your compatible Bluetooth dongle to the Titan One input port

To add Bluetooth capability to Titan One device you will need a Bluetooth USB Adapter compliant with 4.0+ standard.
 

Press the Xbox button on your Xbox One S controller

The Xbox LED on the controller should start blinking white, meaning the controller is tying to connect with Titan One device.
 
 
Your Xbox One S controller is connected when the display shows 0 with no dot at the bottom.
 
To speed up the connection uncheck the option "Enable Bluetooth searching" in Device Options.