t2:gamepacks:universal_gamepack

This is an old revision of the document!


Universal Gamepack

Loading the Gamepack


To load a Gamepack into the Titan Two, simple drag-and-drop the Gamepack icon box from the Online Resources to any Memory Slot in the Gtuner's Device Memory Slots pane.

If the Memory Slot is not empty, its content will be overwritten.

After the drag-and-drop process, the Memory Slot should show the Gamepack name, version, author and the date/time it was loaded in the Memory Slot.

Configuring the Gamepack


After drag-and-drop the Gamepack to any Memory Slot, click on the configuration icon to open the Interactive Configuration Interface.

The Interactive Configuration Interface contains all MODs available on the Gamepack. By default all available MODs are disabled. The following instructions explain how to enable and configure each available MOD.


INFO


The mods in this gamepack are made to be universal across a wide range of shooters. It is possible some of these mods are not compatible with your game.

FIRE MODE


In this section you can choose when anti-recoil or rapidfire is activated

  • HIP
    Activates specified mods on both HIP/ADS
  • ADS
    Activates specified mods on ADS+FIRE only.


RAPIDFIRE


This section is for customizing your rapidfire timings.

The Hold and Release times are needed for all RapidFire options.

If you're using the Advanced RapidFire option you will also need to configure First To Second Shot Delay and Number Of Shots (Burst Fire)

  • First to second shot delay (ms)
    The recoil of some weapons can be much stronger on the first fired shot. This parameter adds an extra delay between the first and second fired shots to help better control the recoil, which can be very useful when used in conjunction with the Anti-Recoil MOD.
  • Number of shots (burst fire)
    Configure how many rapidfire cycles should run until the fire button is pressed again on the controller. This parameter can convert fully-automatic weapons in semi-automatic single or burst, as well as semi-automatic-single weapons in semi-automatic-burst.

The default hold and release times are recommended for most games.

ANTI RECOIL


The anti-recoil automatically pulls the aiming stick to oppose the weapon recoil while firing. The required pull force varies accordingly the weapon in use and can be configured using the “Vertical or Horizontal” parameter in the profiles section.

There are 8 different Anti-Recoils to choose from and it comes down to personal preference so try them all.

The first 6 work for controllers or XIM.

Mouse (Raw Offset) can only be used if your mouse is directly plugged in to the Titan Two.

Computer Vision (Apex Legends) requires you have setup computer vision (guide on forums) and have the Apex Legends CV script in your working directory.

Rumble Activation

Automatically start/stop the anti recoil function.

  • Disabled
    Rumble activation is disabled. Anti-recoil will activate instantly on Fire Mode trigger press.
  • Start on rumble
    Anti-recoil will be activated when Fire Mode is pressed and rumble is detected. The anti recoil will stop when the trigger is released.
  • Stop on rumble
    Anti-recoil will be activated when Fire Mode is pressed. The anti recoil will stop when no rumble is detected.
  • Start/stop on rumble
    Anti-recoil will be activated when Fire Mode is pressed and rumble is detected. When no rumble is detected the anti-recoil will stop.

Deadzone Compensation

The following Anti-Recoils require your games actual deadzone to be set (not your in game setting deadzone) and work best with XIM.

  • V2 Polar - Dont@Me
  • DrNefario (Latest)
  • J2Kbr DZ Compensation

Deadzone Shape

  • J2Kbr DZ Compensation
    This Anti-Recoil also requires the deadzone shape to be set.


PROFILE SELECTOR


Here you can setup your profile button combo or keys to switch between profiles. The color next to each profile is the color the LED will display on the device.

You can leave them default, customize them or set them to disabled.

  • Button[1]
    The button you want to hold.
  • Button[2]
    The button you want to tap.
  • Key
    Select a single key to switch profiles.


PROFILES:


In this section of the interactive configuration you can find profiles 1-4 to set custom Anti-Recoil values for different weapons and various other mods listed below.

The Anti-Recoil can use single vertical / horizontal values or two stage with timeout for even more control with your weapon.

  • Vertical
    This value helps pull downwards on your weapon.
  • Horizontal
    This value can be negative (to the left) or positive (to the right)
  • Vertical Timeout
    The time before the second vertical value kicks in.
  • Horizontal Timeout
    The time before the second horizontal value kicks in.
  • Reduce HIP
    Some games apply less recoil when firing from the HIP. You can enter a percentage from 0-100% and this will be reduced from your current anti-recoil profile values every time you HIP fire.
  • Reduce Crouch
    The same as Reduce HIP, but for games that apply lower recoil values when crouched.
  • Reduce Prone
    The same as Reduce Crouch, for games that apply lower recoil values when prone.
  • Secondary Weapon Profile
    Here you can select a profile to be activated when you switch weapons with Y or Triangle. When switching weapons the device display will show “P” for primary weapon and “S” for secondary weapon. If your weapon tracking gets messed up or you die and are back to your primary weapon you can reset the tracking by holding the left trigger (ADS) and double tapping the right stick (or whatever keys you have mapped these buttons to)

* Action HIP & Action ADS
Here you can select an action to be performed on HIP and or ADS

* Action HIP Time & Action ADS Time
If you selected strafe the time determines how wide you move. For all other options this is the time before the action is performed where 0 is instant.

* Rapidfire
Here you can select the type of rapidfire option you would like to use.

* Aim Assist
There are three options to choose from and it comes down to personal preference.

* Quickscope
Quick-Scope is usually used with one-shot kill sniper rifles. This MOD automatically executes the action of ADS (“Aiming Down the Sights”), hold-breath and finally fire at the configured time. This technique is particularly effective on consoles due to the aim assist that tends to pull the crosshairs towards an enemy when starting to ADS.

* Auto Reload
This option will automatically press the X or SQUARE button when the release condition of FIRE / ADS is met.


AIM ASSIST


If you have enabled aim assist in any of your profiles you can set the strength here. A higher value does not mean stronger aim assist. You want to set this value slightly above your deadzone.


SCOPE MODE


ADS Options:

  • Disabled
    All scope options are disabled.
  • Auto ADS
    When the fire trigger is pressed the scope (ADS) will automatically be pressed for you.
  • Toggle ADS
    The scope (ADS) trigger once tapped will stay scoped until you tap the trigger again to release it.

Hold Breath Button:

Automatically perform the “hold breath” action when the selected hold breath button is pressed.

* Disabled
Auto hold breath will not be activated.

Quick-Scope Timing(ms)

If you have selected the quick scope option in one of your profiles you can customize the sniper timing here.

Sets the time, in milliseconds, to wait before firing. The Quick-Scope timing must be set accordingly the weapon in use to perfect the accuracy.

AUTO SPOT


Auto Spot Time

The spot/tag button will be automatically pressed every x milliseconds.

Auto Spot Button

Select your in game spot/tag button.

* Disabled
Auto spot will not be activated.

GRENADE OVERCOOK


Grenade Overcook Time

Configure the time in milliseconds based on how long it takes for your grenade to explode. The grenade will then automatically be thrown for you.

Grenade Button

Select your in game grenade throw button.

* Disabled
Grenade overcook will not be activated.

RELOAD CANCEL:


For games that allow reload canceling. Automatically cancel the reload once the fire trigger is pressed. Set the reload time (in ms) to the highest reload time out of the weapons you use. Ex: My SMG reloads in 2 seconds so I would set 2000ms.

TRIGGERS:


Hair-Triggers

The hair-trigger drastically increases the sensitivity of the fire and ads trigger buttons. This has become more relevant as the game developers started to apply deadzone to the trigger buttons, requiring the player to pull the trigger at least halfway down for the action to be registered by the game.

Flip-Triggers

Flip-Triggers will swap your left and right triggers with the bumpers, you should set this option here and not in your game settings.

MISC


Easy Sprint

Easy Sprint attaches the sprint action to the stick movement, avoiding the need to press the Sprint button repetitively.

  • Activated on move stick 50% forward
    Start sprinting as soon as the movement stick is pushed 50% forward.
  • Activated on move stick 90% forward
    Start sprinting when the movement stick is pushed 90% forward.
  • Activated on double tap stick forward
    Start sprinting by double-tapping the movement stick forward.
  • While ADS is deactivated
    Will only sprint when the ADS trigger is not held.
Turbo Melee Button

Turbo Melee executes the melee action repeatedly, Turbo Melee also automates -when possible- processes that take advantage of in-game glitches to decrease the time between attacks.

Select your in game melee button or set it to disabled.

Rapidfire Key

Quickly enable or disable rapidfire when a rapidfire option is selected in your profiles.

Turn Boost Key

For MnK users who need an extra boost when landing in battle royale games or turning in vehicles.


STICK DRIFT


If your controller sticks (left or right) drift on there own slowly increase the slider until they no longer move without any input.


t2/gamepacks/universal_gamepack.1605556924.txt.gz · Last modified: 2020/11/16 15:02 by Mad