Differences

This shows you the differences between two versions of the page.

--- t2:gpc_scripting:examples_1 [2019/05/07 01:26]
scachi [Double Tap]
+++ t2:gpc_scripting:examples_1 [2021/03/09 17:38] (current)
scachi [Script On/Off]
@@ Line 4: / Line 4: @@
 There are always multiple ways to do a single thing. The examples don't claim to be the best solution to achieve something.
+Some examples make use of the [[t2:printf|printf]] function to demonstrate how to use it to write text or values of variables to the ''Output Panel'' during script development. You may want to remove or ''%%//comment%%'' the printf line when you have finished your script and use it for gaming.
 ^ Action ^ Script ^
@@ Line 10: / Line 12: @@
 ^ On button press do press it twice | [[t2:gpc_scripting:examples_1#double_jump|Double Jump]] |
 ^ On button press loop combo n times | [[t2:gpc_scripting:examples_1#loop_combo_n_times|Loop <n> Times]] |
+^ On button press loop combo endless | [[t2:gpc_scripting:examples_1#loop_combo_endless|Loop Endless]] |
 ^ On button hold press it repetitive | [[t2:gpc_scripting:examples_1#aim_assist_abuse|Aim Assist Abuse]] |
 ^ On button hold press it repetitive | [[t2:gpc_scripting:examples_1#bunny_hop|Bunny Hop]] |
+^ On button hold press it repetitive | [[t2:gpc_scripting:examples_1#simple_rapid_fire|Rapid Fire]] |
 ^ On button double tap| [[t2:gpc_scripting:examples_1#double_tap|Double Tap]] &  [[t2:gpc_scripting:examples_1#double_tap|Toggle]] |
+^  \\ |  |
+^ Toggle script on/off - Script | [[t2:gpc_scripting:examples_1#script_on_off|Script]] & [[t2:gpc_scripting:examples_1#script_on_off|Toggle]] |
 ^ Toggle features on/off - Anti Recoil| [[t2:gpc_scripting:examples_1#toggle_anti_recoil|Anti Recoil]] & [[t2:gpc_scripting:examples_1#anti_recoil|Toggle]] |
 ^ Toggle features on/off - Auto Scope| [[t2:gpc_scripting:examples_1#toggle_scope|Auto Scope]] & [[t2:gpc_scripting:examples_1#auto_scope|Toggle]] |
@@ Line 38: / Line 44: @@
 }
 </code>
+or on smaller movement:
+<code gpc2>
+main {
+    if (get_actual(STICK_2_Y) <=  -90.0) set_val(BUTTON_9,100);
+}
+</code>
 ===== Double Jump =====
@@ Line 86: / Line 97: @@
     if (!cLoop) { // combo is not running at the moment
       iLoop--; // iLoop - 1
-      printf("starting combo cLoop, loops left: %d",iLoop);
+      printf("starting combo cLoop, loops left: %d",iLoop); // write text to the Output Panel
       combo_run(cLoop);
     }
   }
+}
+combo cLoop {
+  set_val(BUTTON_16,100);   // press button 16
+  wait(100);              // (press) for 100ms
+  set_val(BUTTON_16,0); // release button 16
+  wait(50);              // (release) for 50ms
+}
+</code>
+===== Loop Combo Endless =====
+When BUTTON_16 is getting pressed play the combo in an endless loop. Press BUTTON_16 again to stop the endless loop.
+<code gpc2>
+bool	bLoop=FALSE;
+main {
+  if (event_active(BUTTON_16)) bLoop = !bLoop; // invert the current state with each press TRUE<->FALSE
+  if (bLoop) combo_run(cLoop); // keep the combo playback active as long as bLoop == TRUE
 }
@@ Line 132: / Line 162: @@
 ===== Double Tap =====
+Simple Double tap detection to run a combo:
+<code gpc2>
+main {
+  // BUTTON_17 has to be pressed twice faster than 200ms
+  if (event_active(BUTTON_17) && time_release(BUTTON_17) < 200) {
+    combo_run(cCmb);
+  }
+}
+combo cCmb {
+  set_val(BUTTON_14,100); // press button
+  wait(400);              // (press) for 400ms
+  set_val(BUTTON_14,0);   // release button
+  wait(400);              // (release) for 400ms
+}
+</code>
 Toggle the state on/off by double press of BUTTON_17 faster than 200ms. \\
 printf will write the text and value of bEnabled to the Output Panel of GTuner IV. \\
@@ Line 204: / Line 251: @@
 </code>
+===== Script On/Off =====
+Press [Touch-Click|View] + [CROSS|A] to quickly enable/disable the script without unload the Memory Slot.
+<code gpc2>
+bool bScript=FALSE;
+main {
+    // Playstation: Touch-Click + CROSS , XBox: View + A
+    if (get_actual(BUTTON_2) && event_active(BUTTON_16)) bScript = !bScript;
+    if (bScript) {
+        // Add your code to run when script is enabled here
+    }
+}
+</code>
 ===== Anti Recoil =====
 Anti Recoil moves the Aim Stick downward automatically to compensate the recoil of weapon when firing.
@@ Line 305: / Line 368: @@
 ===== Rapid Fire =====
 Rapid Fire does press and release the fire button while you are holding down the fire button.
+=== Simple Rapid Fire ===
+When you hold down the fire button the script will press and release the button fast.
+<code gpc2>
+// Simple Rapid Fire
+main {
+  // run rapid fire only when press BUTTON_5
+  if (is_active(BUTTON_5)) combo_run(cRapidFire);
+  // stop when releasing button
+  if (event_release(BUTTON_5)) combo_stop(cRapidFire);
+}
+combo cRapidFire {
+  set_val(BUTTON_5,100); // press button 5
+  wait(40);              // (press) for 40ms
+  set_val(BUTTON_5,0);   // release button 5
+  wait(40);              // (release) for 40ms
+}
+</code>
 === Toggle Rapid Fire ===
 While holding BUTTON_8 press BUTTON_10 to toggle Rapid Fire usage on/off.
@@ Line 364: / Line 447: @@
       set_val(STICK_1_X, clamp(get_val(STICK_1_X) * SENSITIVITY, -100.0, 100.0));
       set_val(STICK_1_Y, clamp(get_val(STICK_1_Y) * SENSITIVITY, -100.0, 100.0));
-    ]
+    }
 }
 </code>

User's Manual and Documentation

Site Tools

Differences