… WORK IN PROGRESS …

The Output Protocol “USB Multi Interface HID” is a bit special.
It allows the Output to be send as keyboard, mouse and gamepad controls. The connect console/PC on the T2 Output Port will see the T2 as a keyboard/mouse.

This requires different scripting approaches than the usual console controller output protocols. Instead of “set_val” you have to use mouse_set (for mouse output) or key_set (for keyboard output).

Utilizing this “USB Multi Interface HID” Output Protocol you can do scripting with the T2 for the PC. Pablosscripts created a forum post with some information about it: Pablo's Beginners Guide to Scripting for PC

You can find a few scripts for this protocol in the Online Resource within GTuner IV: Search for “usb-hid”.
Some USB HID Script specific links:
Universal HID Gamepack (USB Multi Interface HID)
USB-HID Anti Recoil (USB Multi Interface HID)
USB-HID Gamepad 2 Keyboard+Mouse (USB Multi Interface HID)

Important GPC functions for USB HID protocol usage:
Keyboard: keymapping key_passthru key_check key_status key_get key_set
Mouse: mousemapping mouse_passthru mouse_status mouse_get mouse_set

When you want to forward mouse input or keyboard input use the corresponding _passthru function.
As soon as you want to alter the input before outputting it you need to be careful:

More information:
mouse_passthru and mouse_set
mouse_set: always set all mouse ouputs -> X/Y/Wheel/Buttons

A very basic example to forward all mouse and keyboard input to the output port will look like this:

init{
  mousemapping(); // clears defaultt T2 mouse mappings
  keymapping(); // clears default T2 keyboard mappings
}
main{
  mouse_passthru(); // forward mouse input to output
  key_passthru(); // forward keyboard input to output
}

When mouse button 1 is pressed the anti recoil will be applied.

#include <mouse.gph>
 
// configuration 
// note: when a value of 1 is still to strong anti recoil try a higher value for mouse_speed
const int mouse_speed = 10; // <- should be around 10 or higher, a value too low can stop the mouse from working
const int AntiRecoil_X = 0; // anti recoil horizontal
const int AntiRecoil_Y = 1; // anti recoil vertical
 
 
// internal
int32 X, Y, WHEEL;
int32 RX, RY;
 
init {
  keymapping();
  mousemapping();
}
 
main {
  key_passthru();
 
  RX = 0; RY = 0;
  X = 0; Y = 0; WHEEL = 0;
 
  if(mouse_status(MREPORT_UPDATED)) {
      mouse_passthru(); // only passthru when there is data to send
      X = mouse_status(MOUSE_X);
      Y = mouse_status(MOUSE_Y);
      WHEEL = mouse_status(MOUSE_WHEEL);
  }
 
  if(mouse_status(MBUTTON_1))
  {
    if(!(system_time()%mouse_speed)) {
        RX = AntiRecoil_X;
        RY = AntiRecoil_Y;
        mouse_set(MOUSE_X, X+RX);
        mouse_set(MOUSE_Y, Y+RY);
        mouse_set(MOUSE_WHEEL,WHEEL);
    }
  }
}

When mouse button 1 is pressed the anti recoil will be applied, supporting decimal/fix32 values.

#include <mouse.gph>
 
// configuration 
const fix32 antirecoil_X = 0.0; // anti recoil horizontal
const fix32 antirecoil_Y = 0.5; // anti recoil vertical
 
// advanced configuration
const int MOUSE_SPEED = 10; // <- should be around 10 or higher, a value too low can stop the mouse from working
 
// internal
uint32 ARTIMER;
int32 X, Y, WHEEL;
int32 RX, RY;
fix32 ARX, ARY;
 
init {
    keymapping();
    mousemapping();
}
 
main {
    key_passthru();
 
    X = 0; Y = 0; WHEEL = 0; 
    RX = 0; RY = 0;
 
    if(mouse_status(MREPORT_UPDATED)) {
        mouse_passthru(); // only passthru when there is data to send
        X = mouse_status(MOUSE_X);
        Y = mouse_status(MOUSE_Y);
        WHEEL = mouse_status(MOUSE_WHEEL);
    }
 
    if(mouse_status(MBUTTON_1))
    {
        ARTIMER += elapsed_time();
 
        if(!(ARTIMER%MOUSE_SPEED)) {
            ARX += (fix32)(antirecoil_X);
            ARY += (fix32)(antirecoil_Y);
 
            if (antirecoil_X < 0.0) RX += (int)ceil((ARX));
            else RX += (int)floor((ARX));
 
            if (antirecoil_Y < 0.0) RY += (int)ceil((ARY));
            else RY += (int)floor((ARY));
 
            mouse_set(MOUSE_X, X+RX);
            mouse_set(MOUSE_Y, Y+RY);
            mouse_set(MOUSE_WHEEL,WHEEL);
            ARX = mod(ARX,1.0);
            ARY = mod(ARY,1.0);
        }
    } else {
        ARTIMER = MOUSE_SPEED;
        ARX = 0.0; ARY = 0.0;
    }
}

… WORK IN PROGRESS …