KMG Capture is a feature of Gtuner IV to take inputs from a PC and convert them to an output.

1. 2x Micro-USB cable.
2. Windows computer

1. Connect the Micro-USB cable to the Titan Two USB port labeled OUTPUT
2. Connect the other end of the Micro-USB cable on the device you are playing on
3. Connect the Micro-USB cable to the Titan Two USB port labeled PROG
4. Connect the other end of the Micro-USB cable on the Windows computer you want to use inputs from
5. Open Gtuner IV, click Tools in the menu bar and click the KMG Capture…
   1. Check the checkbox for each needed input, then hit enable capture mode to start

1. Using a keyboard or mouse that do not have onboard memory, or require extra drivers
2. Using a steering wheel that does not have onboard memory, or requires extra drivers
3. Using a controller/device wirelessly connected to the PC you cannot use wireless on the Titan Two
4. Connecting a controller not supported directly plugged into the Titan Two
5. Using an input translator/HID output without having to unplug a keyboard and mouse from a computer to plug into the Titan Two
6. Parsec gaming