Site Tools
Sidebar
User's Manual
t2:usage_guides:controllers:switch
Table of Contents
Nintendo Switch Controllers
Nintendo Switch Pro controller and Joy-Cons are supported by the Titan Two and can be used to play on all compatible gaming systems.
Controller Protocol
Relevant information about the Nintendo Switch controller protocol.
USB Polling Interval | 8ms |
Bluetooth Polling Interval | 8ms |
Device Authentication | NO |
Specific Features
Titan Two support for Nintendo Switch specific features.
Player LEDs | YES |
Motion Sensors | YES |
HD Rumble (Vibration) | YES |
Wired Connection (USB)
Requirements
- Type-C USB cable.
USB wired connection only works with the Nintendo Switch Pro controller. |
Regular Usage
- Connect the Type-C USB cable to the Titan Two USB port labeled
INPUT-A
orINPUT-B
; - Connect the other end of the Type-C USB cable on the Nintendo Switch Pro controller.
Wireless (Bluetooth)
Requirements
First-time Configuration
Pairing Method A:
- Press and hold the
UP
button on the Titan Two for 2.5 seconds to enter in pairing mode; - Within 20 seconds, press the Bluetooth sync button on the controller/Joy-Cons;
- The LEDs on the controller will start flashing and after few seconds it should be paired with the Titan Two.
Pairing Method B:
- Connect the Titan Two
PROG
port to the computer using the provided Micro-USB cable; - Open Gtuner IV, go to the Device Configuration pane and click the
Wireless Bluetooth Pairing
button; - Within 20 seconds, press the Bluetooth sync button on the controller/Joy-Cons;
- The LEDs on the controller will start flashing and after few seconds it should be paired with the Titan Two.
Regular Usage
- Controller/Right Joycon - Press the
HOME
button to start wireless connection with the Titan Two. - Left Joy-con - Press the
CAPTURE
button to start wireless connection with the Titan Two.
IMPORTANT NOTE: Connecting a pair of Joycons over Bluetooth will use both Bluetooth Virtual Input Ports. |
t2/usage_guides/controllers/switch.txt · Last modified: 2020/08/26 01:51 by sNAP