Site Tools
Sidebar
User's Manual
t2:usage_guides:controllers:xim
This is an old revision of the document!
Table of Contents
XIM
All models of XIM are compatible with the Titan Two.
Using the XIM for keyboard/mouse conversion
Requirements
- Micro-USB cable.
- XIM
Regular Usage
- Connect the Micro-USB cable to the Titan Two USB port labeled
OUTPUT
- Connect the other end of the Micro-USB cable on the device you are playing on
- Connect the XIM to the Titan Two USB port labeled
INPUT-A
orINPUT-B
; - Attach the keyboard/mouse/authentication controller into the XIM
Titan Two raw keyboard/mouse output to XIM
Requirements
- Micro-USB cable.
- A 7.5V DC, 2A, Positive Internal Pin power adapter
First-time Configuration
- Configure the
Output Protocol
of the Titan Two toUSB Multi Interface HID
.
Regular Usage
- Connect the mouse to the Titan Two USB port labeled
INPUT-A
; - Connect the keyboard to the Titan Two USB port labeled
INPUT-B
; - Connect the 7.5V DC, 2A, Positive Internal Pin power adapter to the XIM USB hub power port
- Connect the Micro-USB cable to the Titan Two USB port labeled
OUTPUT
- Connect the other end of the Micro-USB cable to the XIM
- Connect the authentication controller to the XIM
- Connect the XIM to the console
IMPORTANT NOTE: Some keyboard and mouse devices require extra power to function correctly. A 7.5V DC, 2A, Positive Internal Pin power adapter may be necessary. |
t2/usage_guides/controllers/xim.1598036612.txt.gz · Last modified: 2020/08/21 15:03 by sNAP