t2:usage_guides:controllers:xim

This is an old revision of the document!


XIM

All models of XIM are compatible with the Titan Two.


Using the XIM for keyboard/mouse conversion


Requirements

  1. Micro-USB cable.
  2. XIM

Regular Usage

  1. Connect the Micro-USB cable to the Titan Two USB port labeled OUTPUT
  2. Connect the other end of the Micro-USB cable on the device you are playing on
  3. Connect the XIM to the Titan Two USB port labeled INPUT-A or INPUT-B;
  4. Attach the keyboard/mouse/authentication controller into the XIM

Titan Two raw keyboard/mouse output to XIM


Requirements

  1. Micro-USB cable.
  2. USB hub with a power adapter port
  3. A 5V DC 3A power adapter ([3.5mm x 1.35mm], center-positive)

First-time Configuration

  1. Configure the Output Protocol of the Titan Two to USB Multi Interface HID.

Regular Usage

  1. Connect the mouse to the Titan Two USB port labeled INPUT-A;
  2. Connect the keyboard to the Titan Two USB port labeled INPUT-B;
  3. Connect the 5V DC, 3A, Positive Internal Pin power adapter to the XIM USB hub power port
  4. Connect the Micro-USB cable to the Titan Two USB port labeled OUTPUT
  5. Connect the other end of the Micro-USB cable to the XIM
  6. Connect the authentication controller to the XIM
  7. Connect the XIM to the console
IMPORTANT NOTE: Some keyboard and mouse devices require extra power to function correctly. A 7.5V DC, 2A, Positive Internal Pin power adapter for the Titan Two (not XIM hub) may be necessary.
t2/usage_guides/controllers/xim.1598037611.txt.gz · Last modified: 2020/08/21 15:20 by sNAP