Site Tools
Sidebar
User's Manual
t2:usage_guides:systems:computers
This is an old revision of the document!
Table of Contents
Computers
All Window's and Mac computers are supported by the Titan Two. The Titan Two can connect to a computer via controller output, or via HID output.
Console Polling Rate
Default and maximum USB polling rate supported by the console.
USB Default | 250Hz (4ms) |
USB Maximum | 1000Hz (1ms) |
Controller Protocol
Relevant information about the Xbox One controller protocol.
USB Polling Interval | 8ms |
Device Authentication | NO |
Wired Connection
Requirements
- Provided Micro-USB cable.
- (Optional) Controller for authentication
First-time Configuration
- Configure the
Output Protocol
of the Titan Two toUSB Xbox 360
(no controller needed for authentication) orUSB Xbox One
(requires an Xbox One controller for authentication).
Regular Usage
- (optional) Connect any official Xbox One controller to
INPUT-B
on the Titan Two (for authentication); - Connect the provided Micro-USB cable to the Titan Two USB port labeled
OUTPUT
; - Connect the other end of the Micro-USB cable to any available USB port on the Xbox One.
Note: After the initial device enumeration and authentication, the official Xbox One controller can be removed from the Titan Two. |
t2/usage_guides/systems/computers.1589165602.txt.gz · Last modified: 2020/05/10 22:53 by sNAP