t2:usage_guides:systems:computers

This is an old revision of the document!


Computers

All Window's and Mac computers are supported by the Titan Two. The Titan Two can connect to a computer via controller output, or via HID output.

Console Polling Rate


Default and maximum USB polling rate supported by the console.

USB Default 250Hz (4ms)
USB Maximum 1000Hz (1ms)

Controller Protocol


Relevant information about the Xbox 360 controller protocol.

USB Polling Interval 8ms
Device Authentication NO

Wired Connection (with Xbox One Controller)


Requirements

  1. Provided Micro-USB cable.
  2. Xbox One Controller for authentication

First-time Configuration

  1. USB Xbox One (requires the Xbox One controller plugged in for authentication).

Regular Usage

  1. Connect any official Xbox One controller to INPUT-B on the Titan Two (for authentication);
  2. Connect the provided Micro-USB cable to the Titan Two USB port labeled OUTPUT;
  3. Connect the other end of the Micro-USB cable to any available USB port on the Computer.
Note: After the initial device enumeration and authentication, the official Xbox One controller can be removed from the Titan Two.

Wired Connection (without Xbox One Controller)


Requirements

  1. Provided Micro-USB cable.

First-time Configuration

  1. USB Xbox 360 (does NOT require an Xbox 360 controller plugged in for authentication).
  2. Configure the Output Polling Rate and Input Polling Rate of the Titan Two to Protocol's Default

Regular Usage

  1. Connect any controller to INPUT-A on the Titan Two
  2. Connect the provided Micro-USB cable to the Titan Two USB port labeled OUTPUT;
  3. Connect the other end of the Micro-USB cable to any available USB port on the Computer.
t2/usage_guides/systems/computers.1595010542.txt.gz · Last modified: 2020/07/17 14:29 by sNAP