Site Tools
Sidebar
User's Manual
t2:usage_guides:systems:multihid
Table of Contents
Multi Interface HID
All Titan Two features such as crossover and scripting can also be used to play PC games on Steam, Windows, Mac, Linux and Emulators. The Multi Interface HID enables the Titan Two to output simultaneously as raw keyboard, raw mouse and joystick. The interfaces can be individually configured and programmed.
You need run a script to be able to use this mode:
init{ mousemapping(); keymapping(); } main{ mouse_passthru(); key_passthru(); }
More information about Multi Interface HID scripting: Here
Polling Rate
Default and maximum USB polling rate.
USB Default | 1000Hz (1ms) |
USB Maximum | 1000Hz (1ms) |
Protocol
Relevant information about the Multi Interface HID protocol.
USB Polling Interval (All Interfaces) | 1ms |
Features
Multi Interface HID features.
Keyboard Pass Through | YES |
Mouse Pass Through | YES |
Gamepad to Keyboard and Mouse Conversion | YES |
Wired Connection
Requirements
- Provided Micro-USB cable.
First-time Configuration
- Configure the
Output Protocol
of the Titan Two toUSB Multi Interface HID
.
Regular Usage
- Connect any compatible controller, keyboard and/or mouse to the Titan Two input ports;
- Connect the provided Micro-USB cable to the Titan Two USB port labeled
OUTPUT
; - Connect the other end of the Micro-USB cable to any available USB port on the computer.
Note: Joystick output is limited to PC only. |
t2/usage_guides/systems/multihid.txt · Last modified: 2020/10/13 08:05 by scachi