t2:usage_guides:systems:wii

Nintendo Wii U

The Nintendo Wii U (2012) is supported by the Titan Two device. The Titan Two connects to the Wii U console emulating an original Wii U Pro controller.

Controller Protocol


Relevant information about the Nintendo Wii U Pro controller protocol.

Bluetooth Polling Interval 8ms
Device Authentication YES Extension Data Encryption

Specific Features


Titan Two support for Nintendo Wii U specific features.

Player LEDs YES
Rumble (Vibration) YES

Wireless Connection


Requirements

  1. Bluetooth Module 1);
  2. Micro-SD Card 2);
  3. Provided Micro-USB cable or External Power Supply 3).

First-time Configuration

  1. Install and configure the Bluetooth Module and the Micro-SD Card on the Titan Two;
  2. Power the Titan Two utilizing the provided Micro-USB cable or the External Power Supply;
  3. Configure the Output Protocol of the Titan Two to Bluetooth Nintendo Wii U.

Pairing Method A:

  1. Press the Sync button on the Nintendo Wii U Console;
  2. Press and hold the UP button on the Titan Two for 2.5 seconds to enter in pairing mode;
  3. The Titan Two will enter in Bluetooth pairing mode and after few seconds the OUTPUT LED should turn green, indicating the pairing with the Nintendo Wii U succeed.

Pairing Method B:

  1. Connect the Titan Two PROG port to the computer using the provided Micro-USB cable;
  2. Open Gtuner IV, go to the Device Configuration pane and click the Wireless Bluetooth Pairing button;
  3. Press the Sync button on the Nintendo Wii U Console;
  4. The Titan Two will enter in Bluetooth pairing mode and after few seconds the OUTPUT LED should turn green, indicating the pairing with the Nintendo Wii U succeed.

Regular Usage

  1. Power the Titan Two utilizing the provided Micro-USB cable or the External Power Supply;
  2. Connect any compatible controller to the Titan Two;
  3. Press the PS/Xbox/Guide/Home button on the controller to initiate the wireless connection between the Titan Two and Wii U / Wii.
Troubleshooting: If the Bluetooth connection with Nintendo Wii U does not work, try disconnect all controllers from the console:
System Settings → Wii Remote and Sensor Bar → Delete All Wii Remote Pairings.
1) , 2) The Bluetooth Module + Micro-SD Card Bundle is sold separately.
3) The External Power Supply is sold separately.
t2/usage_guides/systems/wii.txt · Last modified: 2020/05/12 18:11 by J2Kbr